Matbro

Last updated
Matbro TS270 with a flat 8 bale grab for small square bales Matbro TS270 with flat 8 bale grab.jpg
Matbro TS270 with a flat 8 bale grab for small square bales

Matbro was a brand of lifting equipment, popular with farmers. Matbro produced a wide range of all terrain forklifts and telescopic handlers in their distinctive yellow livery, using engines derived from Ford and Perkins. Matbro began operating at a loss in the late 1990s and in the end went under in 2003 after accounting issues in their parent company Powerscreen. The old designs were then sold to the tractor company John Deere, [1] which sub-licensed them to heavy lifting company Terex, who continued to evolve the designs, with new ideas such as side-mounted engines instead of rear ones and hydrostatic drive.

Contents

Origin

The company, named after its founders the Mathew brothers, produced forklift trucks in Horley in Surrey, England. Between 1964 and 1971 a range of forklifts carrying loads of 8000 lb to 17,765 lb, named the Yard Model and the Compact Model were produced. These used axles made by GKN Centrax at Newton Abbot in Devon, under licence from the Rockwell-Standard. The frequent failure of axles supplied by Centrax for loads heavier than recommended by Rockwell led to a legal case which eventually went before Lord Denning in the Court of Appeal of England and Wales. [2] This model with pivot steering and equal sized wheels was the basis of the first radial arm machines, the RAM40 with 40 cwt (2 imperial tons) lift capacity, produced c.1980. This was soon improved with a telescopic boom, producing the Teleram 40. These compact machines with the operator sitting above the automatic gearbox and just in front of the engine proved popular with farmers for their ability to go almost anywhere and do a wide range of jobs, while being able to manoeuvre in confined spaces.

Related Research Articles

<span class="mw-page-title-main">Truck</span> Commercial or utilitarian motor vehicle

A truck or lorry is a motor vehicle designed to transport freight, carry specialized payloads, or perform other utilitarian work. Trucks vary greatly in size, power, and configuration, but the vast majority feature body-on-frame construction, with a cabin that is independent of the payload portion of the vehicle. Smaller varieties may be mechanically similar to some automobiles. Commercial trucks can be very large and powerful and may be configured to be mounted with specialized equipment, such as in the case of refuse trucks, fire trucks, concrete mixers, and suction excavators. In American English, a commercial vehicle without a trailer or other articulation is formally a "straight truck" while one designed specifically to pull a trailer is not a truck but a "tractor".

<span class="mw-page-title-main">Tractor</span> Engineering vehicle specifically designed to deliver a high tractive effort

A tractor is an engineering vehicle specifically designed to deliver a high tractive effort at slow speeds, for the purposes of hauling a trailer or machinery such as that used in agriculture, mining or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially tillage, and now many more. Agricultural implements may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.

<span class="mw-page-title-main">Skid-steer loader</span> Compact heavy equipment with differential steering

A skid loader, skid-steer loader, SSL, or skidsteer is any of a class of compact heavy equipment with lift arms that can attach to a wide variety of buckets and other labor-saving tools or attachments.

<span class="mw-page-title-main">Forklift</span> Powered industrial truck

A forklift is a powered industrial truck used to lift and move materials over short distances. The forklift was developed in the early 20th century by various companies, including Clark, which made transmissions, and Yale & Towne Manufacturing, which made hoists.

<span class="mw-page-title-main">Crane (machine)</span> Type of machine

A crane is a machine used to move materials both vertically and horizontally, utilizing a system of a boom, hoist, wire ropes or chains, and sheaves for lifting and relocating heavy objects within the swing of its boom. The device uses one or more simple machines, such as the lever and pulley, to create mechanical advantage to do its work. Cranes are commonly employed in transportation for the loading and unloading of freight, in construction for the movement of materials, and in manufacturing for the assembling of heavy equipment.

<span class="mw-page-title-main">John Deere</span> American agricultural and industrial auto manufacturing corporation

Deere & Company, doing business as John Deere, is an American corporation that manufactures agricultural machinery, heavy equipment, forestry machinery, diesel engines, drivetrains used in heavy equipment, and lawn care equipment. It also provides financial services and other related activities.

<span class="mw-page-title-main">Loader (equipment)</span> Heavy equipment machine

A loader is a heavy equipment machine used in construction to move or load materials such as soil, rock, sand, demolition debris, etc. into or onto another type of machinery.

<span class="mw-page-title-main">Backhoe loader</span> Heavy equipment vehicle

A backhoe loader, also called a loader backhoe, loader excavator, tractor excavator, digger or colloquially shortened to backhoe within the industry, is a heavy equipment vehicle that consists of a tractor-like unit fitted with a loader-style shovel/bucket on the front and a backhoe on the back. Due to its (relatively) small size and versatility, backhoe loaders are very common in urban engineering and small construction projects as well as developing countries. This type of machine is similar to and derived from what is now known as a TLB (Tractor-Loader-Backhoe), which is to say, an agricultural tractor fitted with a front loader and rear backhoe attachment.

<span class="mw-page-title-main">Heavy equipment</span> Vehicles designed for executing construction tasks

Heavy equipment, heavy machinery, earthmovers, construction vehicles, or construction equipment, refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. Heavy equipment usually comprises five equipment systems: the implement, traction, structure, power train, and control/information.

<span class="mw-page-title-main">Traction engine</span> Steam-powered haulage engine

A traction engine is a steam-powered tractor used to move heavy loads on roads, plough ground or to provide power at a chosen location. The name derives from the Latin tractus, meaning 'drawn', since the prime function of any traction engine is to draw a load behind it. They are sometimes called road locomotives to distinguish them from railway locomotives – that is, steam engines that run on rails.

<span class="mw-page-title-main">Grader</span> Construction machine

A grader, also commonly referred to as a road grader, motor grader, or simply blade, is a form of heavy equipment with a long blade used to create a flat surface during grading. Although the earliest models were towed behind horses, and later tractors, most modern graders are self-propelled and thus technically "motor graders".

<span class="mw-page-title-main">Tatra 815</span> Motor vehicle

The Tatra 815 is a truck family, produced by Czech company Tatra. It uses the traditional Tatra concept of rigid backbone tube and swinging half-axles giving independent suspension. The vehicles are available in 4x4, 6x6, 8x8, 10x8, 10x10, 12x8 and 12x12 variants. There are both air-cooled and liquid-cooled engines available with power ranging from 230–440 kilowatts (310–590 hp). As a successor to Tatra 813 it was originally designed for extreme off-road conditions, while nowadays there are also variants designated for mixed use. The gross weight is up to 35,500 kg (78,264 lb).

<span class="mw-page-title-main">International Harvester</span> American manufacturing company

The International Harvester Company was an American manufacturer of agricultural and construction equipment, automobiles, commercial trucks, lawn and garden products, household equipment, and more. It was formed from the 1902 merger of McCormick Harvesting Machine Company and Deering Harvester Company and three smaller manufacturers: Milwaukee; Plano; and Warder, Bushnell, and Glessner. Its brands included McCormick, Deering, and later McCormick-Deering, as well as International. Along with the Farmall and Cub Cadet tractors, International was also known for the Scout and Travelall vehicle nameplates. In the 1980s all divisions were sold off except for International Trucks, which changed its parent company name to Navistar International.

<span class="mw-page-title-main">Ransomes, Sims & Jefferies</span>

Ransomes, Sims and Jefferies Limited was a major British agricultural machinery maker also producing a wide range of general engineering products in Ipswich, Suffolk including traction engines, trolleybuses, ploughs, lawn mowers, combine harvesters and other tilling equipment. Ransomes also manufactured Direct Current electric motors in a wide range of sizes, and electric forklift trucks and tractors. They manufactured aeroplanes during the First World War. Their base, specially set up in 1845, was named Orwell Works.

<span class="mw-page-title-main">Telescopic handler</span> Industrial machine

A telescopic handler, also called a lull, telehandler, teleporter, reach forklift, or zoom boom, is a machine widely used in agriculture and industry. It is somewhat like a forklift but has a boom, making it more a crane than a forklift, with the increased versatility of a single telescopic boom that can extend forwards and upwards from the vehicle. The boom can be fitted with different attachments, such as a bucket, pallet forks, muck grab, or winch.

Muir Hill (Engineers) Ltd was a general engineering company based at Old Trafford, Manchester, England. It was established in the early 1920s and specialised in products to expand the use of the Fordson tractor, which in the pre-war days included sprung road wheels, bucket loaders, simple rail locomotives, and in particular in the 1930s they developed the dumper truck. Later they built high horse power tractors.

<span class="mw-page-title-main">Cab over</span> Vehicle with cabin above the engine

Cab-over, also known as cab over engine (COE), cab forward or flat face (U.S.), flat nose (Canada), or forward control (UK), is a body style of truck, bus, or van that has a vertical front, "flat face" or a semi-hood, with the cab of the truck sitting above the front axle. This contrasts with a conventional truck where the engine is mounted in front of the driver.

<span class="mw-page-title-main">Wacker Neuson</span> Manufacturer of construction equipment

Wacker Neuson SE with headquarters in Munich, Germany, is a manufacturer of construction equipment and compact machines for concrete and construction site technology listed on the stock market. The group includes the product brands Wacker Neuson, Kramer and Weidemann. The family business, founded in 1848, employs around 6,000 people worldwide (2021).

<span class="mw-page-title-main">M809 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M809 Series 5-ton 6x6 truck (G908) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled. Built by AM General, they evolved into the M939 Series.

References

  1. "Matbro design rights bought by John Deere". 8 May 1998.
  2. GKN Centrax Gears v. Matbro [ permanent dead link ] Accessdate=2008-09-05

Commons-logo.svg Media related to Matbro vehicles at Wikimedia Commons