Mazda 717C

Last updated

The Mazda 717C is a prototype racing car built for Mazdaspeed for the 24 Hours of Le Mans under the Group C Junior formula. It was the first racecar built by Mazda since the ending of their running in GT with the RX-7 in 1982. It used a 2-rotor 13B Wankel engine, similar to the production engine in the Mazda RX-7. The bodywork and chassis were actually built by Mooncraft racing with assistance from Mazda.

Two 717Cs were entered at 1983 24 Hours of Le Mans, being the only finishers in the C Junior class, and finishing 12th and 18th overall.

The following year the car would be replaced by the 727C. The Yamaha OX99-11is said to have a similar design from the 717C.


Related Research Articles

Mazda Japanese multinational automaker

Mazda Motor Corporation is a Japanese multinational automaker based in Fuchū, Hiroshima, Japan.

Mazda RX-7 Series of rotary powered sports cars

The Mazda RX-7 is a front-engine, rear-wheel-drive, rotary engine-powered sports car that was manufactured and marketed by Mazda from 1978 to 2002 across three generations, all of which made use of a compact, lightweight Wankel rotary engine.

24 Hours of Daytona Sports car endurance race held in Daytona, FL, US

The 24 Hours of Daytona, also known as the Rolex 24 At Daytona for sponsorship reasons, is a 24-hour sports car endurance race held annually at Daytona International Speedway in Daytona Beach, Florida. It is run on the Sports Car Course layout, a 3.56-mile (5.73 km) combined road course, utilizing portions of the tri-oval and an infield road course. Since its inception, it has been held on the last weekend of January or first weekend of February as part of Speedweeks, and it is the first major automobile race of the year in North America. The race is sanctioned by IMSA and is the first race of the season for the IMSA SportsCar Championship.

Mazda Wankel engine Motor vehicle engine

The Mazda Wankel engines are a family of Wankel rotary combustion car engines produced by Mazda.

Mazda 787B

The Mazda 787 and its derivative 787B are Group C sports prototype racing cars that were developed by Japanese automobile manufacturer Mazda for use in the World Sportscar Championship, All Japan Sports Prototype Championship, and the 24 Hours of Le Mans from 1990 to 1991. Designed to combine a mixture of the Fédération Internationale du Sport Automobile (FISA) Group C regulations with the International Motor Sports Association (IMSA) GTP regulations, the 787s were the last Wankel rotary-powered racing cars to compete in the World and Japanese championships, using Mazda's R26B engine.

Mazda 767

The Mazda 767/767B are prototype racing cars that were built by Mazdaspeed for the 24 Hours of Le Mans running under the IMSA-spec GTP class. The 767 replaced the 757 in 1988, upgrading to a newer and larger 4-rotor 13J Wankel engine which produced nearly 600 hp (450 kW).

Mazda 757 Prototype racing car

The Mazda 757 is a prototype racing car built by Mazdaspeed for the 24 Hours of Le Mans running under the IMSA-spec GTP class. It replaced the previous lineage of Group C2 class cars which ended with the 737C and was the first chassis built entirely by Mazdaspeed and designed by Nigel Stroud. The 747 designation was skipped to avoid confusion with the second generation Mazda RX-7, which was developed under the codename P747. The 757 used a new 3-rotor 13G Wankel engine.

Mazda 737C

The Mazda 737C is a prototype racing car that was built for Mazdaspeed for the 24 Hours of Le Mans under the Group C2 formula. It was the final evolution of the initial Mooncraft built design dating back to the 717C. It again used a 2-rotor 13B Wankel engine.

The Mazda 727C is a prototype racing car that was built for Mazdaspeed for the 24 Hours of Le Mans in the Group C2 class. It replaced the 717C in 1984 as an evolution of the Mooncraft-built design, and used the same 2-rotor 13B Wankel engine as the previous model.

Allan George MoffatOBE is a Canadian-Australian racing driver known for his four championships in the Australian Touring Car Championship, six wins in the Sandown 500 and his four wins in the Bathurst 500/1000. Moffat was inducted into the V8 Supercars Hall of Fame in 1999.

Mazda MXR-01 Motor vehicle

The Mazda MXR-01 is a Group C sports prototype that was used by Mazda's factory team Mazdaspeed in the 1992 World Sportscar Championship season. It would be the final Mazda entry in sports car racing since the inception of its Le Mans project in 1983. It was based on the Jaguar XJR-14.

IMSA GT Championship Auto racing championship in the United States

IMSA GT was a sports car racing series organized by International Motor Sports Association. Races took place primarily in the United States, and occasionally in Canada.

Mazda RX-792P Motor vehicle

The Mazda RX-792P is a sports prototype racing car built for the IMSA GT Championship's GTP category for Mazda. Its career was short lived, with only two cars running in 1992 before the project was abandoned.

Mazda Furai Motor vehicle

The Mazda Furai was a concept car revealed on 27 December 2007 and designed by Swift Engineering and manufactured by Mazda. A teaser image of the vehicle was released on 11 December 2007. The Furai officially debuted at the 2008 North American International Auto Show in Detroit.

Lola B08/80

The Lola B08/80 is a Le Mans Prototype built by Lola Cars International. It is effectively the LMP2 version of the larger Lola B08/60; they are the first closed-cockpit sports prototypes built by Lola since the T92/10 of 1992. The B08/80 is optimised for the smaller engines and lighter weight of the LMP2 category in comparison to the larger and heavier B08/60.

Peter Gerard McLeod is a retired Australian racing driver, best known as co-winner of the 1987 James Hardie 1000 at Bathurst, and for driving the distinctive yellow and black Slick 50 Mazda RX-7 Group C touring car during the early to mid-1980s.

Allan Moffat Racing was an Australian motor racing team owned by multiple-championship winning Canadian-Australian racing driver Allan Moffat. The team was highly successful, winning races on three continents including three Australian Touring Car Championships in 1976, 1977 and 1983, four Bathurst 500/1000s including a memorable 1-2 victory in 1977, and the 1987 Monza 500, which was the inaugural race of the World Touring Car Championship.

The Mazda GTP is an IMSA GTP race car that was built by Pierre Honegger in 1981. Based on a Mazda RX-7, the car initially competed in the GTX category as the Mazda RX-7 GTP, before it was rebuilt for the IMSA GTP category in 1983. Throughout its career, the car used a Mazda 13B Wankel rotary engine, similar to that used in the production RX-7s. Although the rotary-engined sports prototypes generally had a reputation of being very reliable, the Mazda GTP frequently failed to finish races, and was never able to better the eighth place achieved at the 1983 24 Hours of Daytona. In 1986, one car was purchased by Erie Scientific Racing, and rebuilt to become the Badger BB. This car was no more successful or reliable than its predecessor, and was last used in 1989, by which point it was owned by Jack Engelhardt. The other car, meanwhile, was rebuilt by Honegger into the Denali Speedcar, which was used with moderate success in 1986 and 1987.

Crawford Composites is an American manufacturer of carbon fiber and composite parts company based in Denver, North Carolina. Crawford designs and manufacture structural and non-structural composite components in industries such as aerospace, aviation, motor sports, health care, defense and structural construction.

Walt Bohren was an American race car driver who won the IMSA GTU Championship in 1980.