Medical animation

Last updated

A medical animation is a short educational film, usually based around a physiological or surgical topic, that is rendered using 3D computer graphics. While it may be intended for an array of audiences, the medical animation is most commonly utilized as an instructional tool for medical professionals or their patients.

Contents

Early medical animations were limited to basic wire-frame models because of low processor speed. However, rapid evolution in microprocessor design and computer memory has led to animations that are significantly more intricate.

The medical animation may be viewed as a standalone visualization, or in combination with other sensory input devices, such as head-mounted displays, stereoscopic lenses, haptic gloves, interactive workstations, or Cave Automatic Virtual Environments (CAVEs).

History

Though evolved from the field of realistic medical illustrations (such as those created by Flemish anatomist Andreas Vesalius in the 16th century), medical animations are also indebted to motion picture technology and computer-generated imagery.

The term medical animation predates the advent of computer-generated graphics by approximately three decades. Though the first computer animation was created at Bell Telephone Labs in 1963, [1] the phrase "medical animation" appears in scholarly contexts as early as 1932 in the Journal of Biological Photography. [2] As discussed by Clarke and Hoshall, the term referred to two-dimensional illustrated motion pictures produced for inclusion in films screened for medical students. [3]

The creation of the computer-generated medical animation began in earnest in the early 1970s. The first description of the use of 3D computer graphics for a medical purpose can be found in an issue of the journal Science , dated 1975. Its authors, a team of researchers from the Departments of Chemistry and of Biochemistry and Biophysics at Texas A&M University, described the potential uses of medical animation for visualizing complex macromolecules.

By the late 1980s, the medical animation had become a distinct modality of physiological and surgical instruction. [4] By that point, researchers had suggested that the 3D medical animations could illustrate physiological, molecular or anatomical concepts that might otherwise be infeasible. [5]

Today's medical animation industry comprises one facet of the non-entertainment computer animation industry, which has annual revenues of $15 billion per year worldwide. [6]

Applications

Patient Education

A growing trend among medical animation studios is the creation of clips focused on explaining surgical procedures or pharmaceutical mechanisms of action in terms simple enough for a layperson to understand. These animations may be found on hospital websites, in doctor's office workstations, online health websites, or via medical animation studios themselves. [7] [8] [9] [10] Such animations may also appear on television shows, OTT platforms and other popular entertainment venues as a way to educate an audience on a medical topic under discussion.

Occasionally, this form of animation is used in-hospital. In this context, clips may be used in order to get fully informed consent from patients facing surgery or medical treatment. Likewise, studies have suggested that patient-educating medical animations may be able to reduce the rate of accidental wrong-site surgeries. [11]

Medical simulation

Due to both the relative scarcity of cadavers to be used for surgical instruction [12] and to the dwindling use of animals and patients who have not given consent, institutes may utilize medical animations as a way to teach doctors-to-be anatomical and surgical concepts. Such simulations may be viewed passively (as in the case of 3D medical animations included via CD-ROM in medical textbook packages) or using interactive controls. The stimulation of hand-eye skills using haptics is another possible use of medical animation technology, one that stems from the replacement of cadavers in surgical classrooms with task trainers and mannequins. [13]

The creation of proportionally accurate virtual bodies is often accomplished using medical scans, such as computed tomography (CT) or magnetic resonance imaging (MRI). Such techniques represent a cost- and time-saving move away from the creation of medical animations using sectioned cadavers. For instance, the National Library of Medicine's Visible Human Project created 3D medical animations of the male and female bodies by scanning cadavers using CT technology, after which they were frozen, shaved into millimeter-thick sections and recorded using high-resolution photographs. [14]

By comparison, medical animations made using only scanned data can recreate the internal structures of live patients, often in the context of surgical planning. [15] [16]

Cellular and molecular animation

Medical animations are often employed as a method of visualizing the vast number of microscopic processes that occur in the human body. These may involve the interplay between organelles, the transcription of DNA, the molecular action of enzymes, the interactions between pathogens and white blood cells or virtually any other cellular or sub-cellular process. [17] [18]

Molecular animations are similar in that they depict structures that are too small for the human eye to see. However, this latter category is also capable of illustrating atomic structures, which are often too minute to be visualized with any clarity via microscopy. [19]

Cellular animation can use models built manually or ones which originate from microscopy and subsequent polygonal 3d surface creation.

Pharmaceutical mechanism of action

As a way to explain how medications work, pharmaceutical manufacturers may provide mechanism of action animations, often through websites dedicated to specific prescription drugs. [20] These medical visualizations typically do not represent cellular structures in a fully accurate or proportional way. Instead, mechanism of action animations may visually simplify the interaction between drug molecules and cells. These medical animations may also explain the physiological origins of the disease itself. [21]

Emergency care instruction

Several studies have suggested that 3D medical animations may be used to instruct novices on how to perform cardiopulmonary resuscitation in an emergency. [22] These reports usually suggest the use of pre-prepared, voice-narrated motion-capture animations that are viewed by means of a cellphone or other portable electronic device. [23]

Forensic reconstruction

A number of applications for medical animations has been developed in the field of forensics. These include the so-called "virtutopsy," or MRI-assisted virtual autopsy, of remains that are too damaged to be otherwise inspected or reconstructed. [24] Likewise, medical animations can appear in courtrooms, be used as forensic "reconstructions" of crime scenes or recreate the crimes themselves. [25] The admissibility of such evidence is questionable.

Electronic or Interactive learning

Researchers have suggested that medical animations can be used to disseminate medical education materials electronically, allowing them to be accessed and utilized by professional and amateur health practitioners alike. [26]

Surgical training and planning

Some institutes use animations both to teach medical students how to perform basic surgery, and to give seasoned surgeons the chance to expand their skill set. [27] Multiple studies have been conducted on the effectiveness and feasibility of medical animation-based surgical pre-planning. Experimental animation tools have been created as integral technology in image-guided surgery as well. [28] Today, surgical training uses medical animation combined with virtual reality (VR), augmented reality (AR) and simulation. [29] [30]


See also

Sources

  1. ↑ "The World's First Computer Animation: Created by Edward E. Zajac of AT&T Bell Laboratories". University of Arizona. Archived from the original on 2011-08-15.
  2. ↑ Bosse, K.K. (1992). "The use of animated drawings in medical motion pictures". Journal of Biological Photography. 60 (3): 98–9. PMID   1517189.
  3. ↑ Illustration: Its Technique and Application to the Sciences. Clarke CD and Hoshall EM. John D. Lucas Company. 1939. pp 386.
  4. ↑ Collins, D.; Cotton, F.; Hazen, E.; Meyer, E.; Morimoto, C. (1975). "Protein crystal structures: Quicker, cheaper approaches". Science. 190 (4219): 1047–53. Bibcode:1975Sci...190.1047C. doi:10.1126/science.1188383. PMID   1188383. S2CID   44583219.
  5. ↑ Swanson, Stanley M.; Wesolowski, Tomasz; Geller, Maciej; Meyer, Edgar F. (1989). "Animation: A useful tool for protein molecular dynamicists, applied to hydrogen bonds in the active site of elastase". Journal of Molecular Graphics. 7 (4): 240–2, 223–4. doi:10.1016/0263-7855(89)80009-8. PMID   2486826.
  6. ↑ Prayag A. "Medical animation gaining importance." Hindu Business Line. Bangalore. October 14, 2007.
  7. ↑ "Transcatheter Aortic Valve Replacement (TAVR)." Mayo Clinic. 2020.
  8. ↑ "What Is A Migraine." EveryDay Health. 2020.
  9. ↑ "Medical Animation" Scientific Animations. 2020.
  10. ↑ "Medical Animation Examples" DG Medical Animations. 2020.
  11. ↑ See, Lai-Chu; Chang, Yi-Hua; Chuang, Kai-Lan; Lai, Hui-Ru; Peng, Pei-I.; Jean, Wen-Chyi; Wang, Chao-Hui (2011). "Animation program used to encourage patients or family members to take an active role for eliminating wrong-site, wrong-person, wrong-procedure surgeries: Preliminary evaluation". International Journal of Surgery. 9 (3): 241–7. doi:10.1016/j.ijsu.2010.11.018. PMID   21167326.
  12. ↑ Agoreyo, F.O. (2003). "Prosection In Place Of Human Dissection – Way Out Of Scarcity Of Cadaver – Review Article". Annals of Biomedical Sciences. 2 (2): 69–73. doi:10.4314/abs.v2i2.40648.
  13. ↑ Rosen, Kathleen R. (2008). "The history of medical simulation". Journal of Critical Care. 23 (2): 157–66. doi:10.1016/j.jcrc.2007.12.004. PMID   18538206.
  14. ↑ Ackerman MJ. "Visible Human Project: Getting the Data." U.S. National Library of Medicine. July 27, 2011.
  15. ↑ Soler, Luc; Marescaux, Jacques (2007). "Patient-specific Surgical Simulation". World Journal of Surgery. 32 (2): 208–12. doi:10.1007/s00268-007-9329-3. PMID   18066615. S2CID   20557550.
  16. ↑ Tory, M.; Rober, N.; Moller, T.; Celler, A.; Atkins, M.S. (2001). "4D space-time techniques: a medical imaging case study". Proceedings Visualization, 2001. VIS '01. p. 473. CiteSeerX   10.1.1.16.5542 . doi:10.1109/VISUAL.2001.964554. ISBN   978-0-7803-7200-9. S2CID   476796.
  17. ↑ "The Inner Life of the Cell." Archived 2011-02-19 at the Wayback Machine BioVisions at Harvard University. 2011.
  18. ↑ Virtual Cell Animation Collection. Molecular and Cellular Biology Learning Center. North Dakota State University.
  19. ↑ Bromberg, Sarina; Chiu, Wah; Ferrin, Thomas E. (2010). "Workshop on Molecular Animation". Structure. 18 (10): 1261–5. doi:10.1016/j.str.2010.09.001. PMC   3071847 . PMID   20947014.
  20. ↑ Psoriatic Arthritis: How HUMIRA Works. Abbott Laboratories. 2011.
  21. ↑ "Mechanism of Action: Learn More About Eczema Treatment With Protopic". Astellas Pharma US, Inc. 2008. Archived from the original on 2008-12-11.
  22. ↑ Choa, Minhong; Park, Incheol; Chung, Hyun Soo; Yoo, Sun K.; Shim, Hoshik; Kim, Seungho (2008). "The effectiveness of cardiopulmonary resuscitation instruction: Animation versus dispatcher through a cellular phone". Resuscitation. 77 (1): 87–94. doi:10.1016/j.resuscitation.2007.10.023. PMID   18164119.
  23. ↑ Choa, Minhong; Cho, Junho; Choi, Young Hwan; Kim, Seungho; Sung, Ji Min; Chung, Hyun Soo (2009). "Animation-assisted CPRII program as a reminder tool in achieving effective one-person-CPR performance". Resuscitation. 80 (6): 680–4. doi:10.1016/j.resuscitation.2009.03.019. PMID   19410356.
  24. ↑ Thali, M.J.; Braun, M.; Buck, U.; Aghayev, E.; Jackowski, C.; Vock, P.; Sonnenschein, M.; Dirnhofer, R. (2005). "VIRTOPSY—scientific documentation, reconstruction and animation in forensic: Individual and real 3D data based geo-metric approach including optical body/object surface and radiological CT/MRI scanning". Journal of Forensic Sciences. 50 (2): 428–42. doi:10.1520/JFS2004290. PMID   15813556.
  25. ↑ Fulcher, K.L. (1996). "The Jury as Witness: Forensic Computer Animation Transports Jurors to the Scene of a Crime or Automobile Accident". University of Dayton Law Review. 55: 56–76.
  26. ↑ Baran, Szczepan W.; Johnson, Elizabeth J.; Kehler, James (2009). "An introduction to electronic learning and its use to address challenges in surgical training". Lab Animal. 38 (6): 202–10. doi:10.1038/laban0609-202. PMID   19455166. S2CID   35044289.
  27. ↑ Ziv, Stephen d. Small (2000). "Patient safety and simulation-based medical education". Medical Teacher. 22 (5): 489–95. CiteSeerX   10.1.1.138.5889 . doi:10.1080/01421590050110777. PMID   21271963. S2CID   41359087.
  28. ↑ Kersten-Oertel, M.; Jannin, P.; Collins, D.L. (2012). "DVV: A Taxonomy for Mixed Reality Visualization in Image Guided Surgery". IEEE Transactions on Visualization and Computer Graphics. 18 (2): 332–52. doi:10.1109/TVCG.2011.50. PMID   21383411. S2CID   16027055.
  29. ↑ Hsieh, M.C.; Lin, Y.H. (Dec 2017). "VR and AR Applications in Medical Practice and Education". Hu Li Za Zhi the Journal of Nursing. 64 (6): 12–18. doi:10.6224/jn.000078. PMID   29164542.
  30. ↑ Dalisay, L. (2013). "How 3D medical animation benefits the healthcare industry". Geometric Medical.

Related Research Articles

<span class="mw-page-title-main">Simulation</span> Imitation of the operation of a real-world process or system over time

A simulation is an imitative representation of a process or system that could exist in the real world. In this broad sense, simulation can often be used interchangeably with model. Sometimes a clear distinction between the two terms is made, in which simulations require the use of models; the model represents the key characteristics or behaviors of the selected system or process, whereas the simulation represents the evolution of the model over time. Another way to distinguish between the terms is to define simulation as experimentation with the help of a model. This definition includes time-independent simulations. Often, computers are used to execute the simulation.

<span class="mw-page-title-main">Boids</span> Artificial life program

Boids is an artificial life program, developed by Craig Reynolds in 1986, which simulates the flocking behaviour of birds, and related group motion. His paper on this topic was published in 1987 in the proceedings of the ACM SIGGRAPH conference. The name "boid" corresponds to a shortened version of "bird-oid object", which refers to a bird-like object. Reynolds' boid model is one example of a larger general concept, for which many other variations have been developed since. The closely related work of Ichiro Aoki is noteworthy because it was published in 1982 — five years before Reynolds' boids paper.

<span class="mw-page-title-main">Scientific visualization</span> Interdisciplinary branch of science concerned with presenting scientific data visually

Scientific visualization is an interdisciplinary branch of science concerned with the visualization of scientific phenomena. It is also considered a subset of computer graphics, a branch of computer science. The purpose of scientific visualization is to graphically illustrate scientific data to enable scientists to understand, illustrate, and glean insight from their data. Research into how people read and misread various types of visualizations is helping to determine what types and features of visualizations are most understandable and effective in conveying information.

<span class="mw-page-title-main">Visual Molecular Dynamics</span> Visualization and modelling software

Visual Molecular Dynamics (VMD) is a molecular modelling and visualization computer program. VMD is developed mainly as a tool to view and analyze the results of molecular dynamics simulations. It also includes tools for working with volumetric data, sequence data, and arbitrary graphics objects. Molecular scenes can be exported to external rendering tools such as POV-Ray, RenderMan, Tachyon, Virtual Reality Modeling Language (VRML), and many others. Users can run their own Tcl and Python scripts within VMD as it includes embedded Tcl and Python interpreters. VMD runs on Unix, Apple Mac macOS, and Microsoft Windows. VMD is available to non-commercial users under a distribution-specific license which permits both use of the program and modification of its source code, at no charge.

<i>In silico</i> Latin phrase referring to computer simulations

In biology and other experimental sciences, an in silico experiment is one performed on a computer or via computer simulation software. The phrase is pseudo-Latin for 'in silicon', referring to silicon in computer chips. It was coined in 1987 as an allusion to the Latin phrases in vivo, in vitro, and in situ, which are commonly used in biology. The latter phrases refer, respectively, to experiments done in living organisms, outside living organisms, and where they are found in nature.

<span class="mw-page-title-main">Robot-assisted surgery</span> Surgical procedure

Robot-assisted surgery or robotic surgery are any types of surgical procedures that are performed using robotic systems. Robotically assisted surgery was developed to try to overcome the limitations of pre-existing minimally-invasive surgical procedures and to enhance the capabilities of surgeons performing open surgery.

Molecular graphics is the discipline and philosophy of studying molecules and their properties through graphical representation. IUPAC limits the definition to representations on a "graphical display device". Ever since Dalton's atoms and Kekulé's benzene, there has been a rich history of hand-drawn atoms and molecules, and these representations have had an important influence on modern molecular graphics.

Patient registration is used to correlate the reference position of a virtual 3D dataset gathered by computer medical imaging with the reference position of the patient. This procedure is crucial in computer assisted surgery, in order to insure the reproducitibility of the preoperative registration and the clinical situation during surgery. The use of the term "patient registration" out of this context can lead to a confusion with the procedure of registering a patient into the files of a medical institution.

Bone segment navigation is a surgical method used to find the anatomical position of displaced bone fragments in fractures, or to position surgically created fragments in craniofacial surgery. Such fragments are later fixed in position by osteosynthesis. It has been developed for use in craniofacial and oral and maxillofacial surgery.

Computer-assisted surgery (CAS) represents a surgical concept and set of methods, that use computer technology for surgical planning, and for guiding or performing surgical interventions. CAS is also known as computer-aided surgery, computer-assisted intervention, image-guided surgery, digital surgery and surgical navigation, but these are terms that are more or less synonymous with CAS. CAS has been a leading factor in the development of robotic surgery.

<span class="mw-page-title-main">Surgical planning</span>

Surgical planning is the preoperative method of pre-visualising a surgical intervention, in order to predefine the surgical steps and furthermore the bone segment navigation in the context of computer-assisted surgery. The surgical planning is most important in neurosurgery and oral and maxillofacial surgery. The transfer of the surgical planning to the patient is generally made using a medical navigation system.

A prosection is the dissection of a cadaver or part of a cadaver by an experienced anatomist in order to demonstrate for students anatomic structure. In a dissection, students learn by doing; in a prosection, students learn by either observing a dissection being performed by an experienced anatomist or examining a specimen that has already been dissected by an experienced anatomist.

Biology data visualization is a branch of bioinformatics concerned with the application of computer graphics, scientific visualization, and information visualization to different areas of the life sciences. This includes visualization of sequences, genomes, alignments, phylogenies, macromolecular structures, systems biology, microscopy, and magnetic resonance imaging data. Software tools used for visualizing biological data range from simple, standalone programs to complex, integrated systems.

<span class="mw-page-title-main">Voxel-Man</span>

VOXEL-MAN is the name of a set of a computer programs for creation and visualization of three-dimensional digital models of the human body derived from cross-sectional images of computer tomography, magnetic resonance tomography or photography. It was developed at the University Medical Center Hamburg-Eppendorf. Applications include diagnostic imaging, digital anatomical atlases and surgery simulators. The 3D interactive atlases of anatomy and radiology for brain/skull and inner organs are available for free download. The name Voxel-Man is derived from the term voxel, the elementary cuboid component of a digital representation of a three-dimensional object. Occasionally the name Voxel-Man is also used as a general term for a digital representation of the human body.

<span class="mw-page-title-main">Computer-generated imagery</span> Application of computer graphics to create or contribute to images

Computer-generated imagery (CGI) is a specific-technology or application of computer graphics for creating or improving images in art, printed media, simulators, videos and video games. These images are either static or dynamic. CGI both refers to 2D computer graphics and 3D computer graphics with the purpose of designing characters, virtual worlds, or scenes and special effects. The application of CGI for creating/improving animations is called computer animation, or CGI animation.

<span class="mw-page-title-main">Amira (software)</span> Software platform for 3D and 4D data visualization

Amira is a software platform for visualization, processing, and analysis of 3D and 4D data. It is being actively developed by Thermo Fisher Scientific in collaboration with the Zuse Institute Berlin (ZIB), and commercially distributed by Thermo Fisher Scientific — together with its sister software Avizo.

A surgery simulator is computer technology developed to simulate surgical procedures for the purpose of training medical professionals, without the need of a patient, cadaver or animal. The concept goes back to the 1980s with video games, but only in the 1990s with three-dimensional graphics and the 2000s with the use of motion sensors for realistic movements has the technology been able to simulate the real situation. The most common type of surgery taught through this method is laparoscopic surgery, although it has also been used to do a trial run before other kinds of procedures. Cataract surgery and other ophthalmic procedures are also widely taught using surgical simulators.

In silico medicine is the application of in silico research to problems involving health and medicine. It is the direct use of computer simulation in the diagnosis, treatment, or prevention of a disease. More specifically, in silico medicine is characterized by modeling, simulation, and visualization of biological and medical processes in computers with the goal of simulating real biological processes in a virtual environment.

<span class="mw-page-title-main">Nadia Magnenat Thalmann</span> Computer scientist

Nadia Magnenat Thalmann is a computer graphics scientist and robotician and is the founder and head of MIRALab at the University of Geneva. She has chaired the Institute for Media Innovation at Nanyang Technological University (NTU), Singapore from 2009 to 2021.

The Dextroscope is a medical equipment system that creates a virtual reality (VR) environment in which surgeons can plan neurosurgical and other surgical procedures.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.