Melting curve analysis

Last updated

Melting curve analysis is an assessment of the dissociation characteristics of double-stranded DNA during heating. As the temperature is raised, the double strand begins to dissociate leading to a rise in the absorbance intensity, hyperchromicity. The temperature at which 50% of DNA is denatured is known as the melting temperature. Measurement of melting temperature can help us predict species by just studying the melting temperature. This is because every organism has a specific melting curve.

Contents

The information gathered can be used to infer the presence and identity of single-nucleotide polymorphisms (SNP). This is because G-C base pairing have 3 hydrogen bonds between them while A-T base pairs have only 2. DNA with mutations from either A or T to either C or G will create a higher melting temperature.

The information also gives vital clues to a molecule's mode of interaction with DNA. Molecules such as intercalators slot in between base pairs and interact through pi stacking. This has a stabilizing effect on DNA's structure which leads to a raise in its melting temperature. Likewise, increasing salt concentrations helps diffuse negative repulsions between the phosphates in the DNA's backbone. This also leads to a rise in the DNA's melting temperature. Conversely, pH can have a negative effect on DNA's stability which may lead to a lowering of its melting temperature.

Implementation

Graphs to show the relation between fluorescence and temperature for labeled probe designed for a Wt sequence, homozygous Wt, heterozygous and homozygous mutant situations Melting Curve Analysis Graphs.svg
Graphs to show the relation between fluorescence and temperature for labeled probe designed for a Wt sequence, homozygous Wt, heterozygous and homozygous mutant situations

The energy required to break the base-base hydrogen bonding between two strands of DNA is dependent on their length, GC content and their complementarity. By heating a reaction-mixture that contains double-stranded DNA sequences and measuring dissociation against temperature, these attributes can be inferred.

Originally, strand dissociation was observed using UV absorbance measurements, [1] but techniques based on fluorescence measurements [2] are now the most common approach.

The temperature-dependent dissociation between two DNA-strands can be measured using a DNA-intercalating fluorophore such as SYBR green, EvaGreen or fluorophore-labelled DNA probes. In the case of SYBR green (which fluoresces 1000-fold more intensely while intercalated in the minor groove of two strands of DNA), the dissociation of the DNA during heating is measurable by the large reduction in fluorescence that results. [3] Alternatively, juxtapositioned probes (one featuring a fluorophore and the other, a suitable quencher) can be used to determine the complementarity of the probe to the target sequence. [3]

The graph of the negative first derivative of the melting-curve may make it easier to pin-point the temperature of dissociation (defined as 50% dissociation), by virtue of the peaks thus formed.

SYBR Green enabled product differentiation in the LightCycler in 1997. [4] Hybridization probes (or FRET probes) were also demonstrated to provide very specific melting curves from the single-stranded (ss) probe-to-amplicon hybrid. Idaho Technology and Roche have done much to popularize this use on the LightCycler instrument.

Applications

Since the late 1990s product analysis via SYBR Green, other double-strand specific dyes, or probe-based melting curve analysis has become nearly ubiquitous. The probe-based technique is sensitive enough to detect single-nucleotide polymorphisms (SNP) and can distinguish between homozygous wildtype, heterozygous and homozygous mutant alleles by virtue of the dissociation patterns produced. Without probes, amplicon melting (melting and analysis of the entire PCR product) was not generally successful at finding single base variants through melting profiles. With higher resolution instruments and advanced dyes, amplicon melting analysis of one base variants is now possible with several commercially available instruments. For example: Applied Biosystems 7500 Fast System and the 7900HT Fast Real-Time PCR System, Idaho Technology's LightScanner (the first plate-based high resolution melting device), Qiagen's Rotor-Gene instruments, and Roche's LightCycler 480 instruments.

Many research and clinical examples [5] exist in the literature that show the use of melting curve analysis to obviate or complement sequencing efforts, and thus reduce costs.

While most quantitative PCR machines have the option of melting curve generation and analysis, the level of analysis and software support varies. High Resolution Melt (known as either Hi-Res Melting, or HRM) is the advancement of this general technology and has begun to offer higher sensitivity for SNP detection within an entire dye-stained amplicon. It is less expensive and simpler in design to develop probeless melting curve systems. However, for genotyping applications, where large volumes of samples must be processed, the cost of development may be less important than the total throughput and ease of interpretation, thus favoring probe-based genotyping methods.

See also

Related Research Articles

<span class="mw-page-title-main">Polymerase chain reaction</span> Laboratory technique to multiply a DNA sample for study

The polymerase chain reaction (PCR) is a method widely used to make millions to billions of copies of a specific DNA sample rapidly, allowing scientists to amplify a very small sample of DNA sufficiently to enable detailed study. PCR was invented in 1983 by American biochemist Kary Mullis at Cetus Corporation. Mullis and biochemist Michael Smith, who had developed other essential ways of manipulating DNA, were jointly awarded the Nobel Prize in Chemistry in 1993.

<span class="mw-page-title-main">Reverse transcription polymerase chain reaction</span> Laboratory technique to multiply an RNA sample for study

Reverse transcription polymerase chain reaction (RT-PCR) is a laboratory technique combining reverse transcription of RNA into DNA and amplification of specific DNA targets using polymerase chain reaction (PCR). It is primarily used to measure the amount of a specific RNA. This is achieved by monitoring the amplification reaction using fluorescence, a technique called real-time PCR or quantitative PCR (qPCR). Combined RT-PCR and qPCR are routinely used for analysis of gene expression and quantification of viral RNA in research and clinical settings.

In molecular biology, an amplicon is a piece of DNA or RNA that is the source and/or product of amplification or replication events. It can be formed artificially, using various methods including polymerase chain reactions (PCR) or ligase chain reactions (LCR), or naturally through gene duplication. In this context, amplification refers to the production of one or more copies of a genetic fragment or target sequence, specifically the amplicon. As it refers to the product of an amplification reaction, amplicon is used interchangeably with common laboratory terms, such as "PCR product."

Cycling probe technology (CPT) is a molecular biological technique for detecting specific DNA sequences. CPT operates under isothermal conditions. In some applications, CPT offers an alternative to PCR. However, unlike PCR, CPT does not generate multiple copies of the target DNA itself, and the amplification of the signal is linear, in contrast to the exponential amplification of the target DNA in PCR. CPT uses a sequence specific chimeric probe which hybridizes to a complementary target DNA sequence and becomes a substrate for RNase H. Cleavage occurs at the RNA internucleotide linkages and results in dissociation of the probe from the target, thereby making it available for the next probe molecule. Integrated electrokinetic systems have been developed for use in CPT.

<span class="mw-page-title-main">Real-time polymerase chain reaction</span> Laboratory technique of molecular biology

A real-time polymerase chain reaction is a laboratory technique of molecular biology based on the polymerase chain reaction (PCR). It monitors the amplification of a targeted DNA molecule during the PCR, not at its end, as in conventional PCR. Real-time PCR can be used quantitatively and semi-quantitatively.

In chemistry, a dark quencher is a substance that absorbs excitation energy from a fluorophore and dissipates the energy as heat; while a typical (fluorescent) quencher re-emits much of this energy as light. Dark quenchers are used in molecular biology in conjunction with fluorophores. When the two are close together, such as in a molecule or protein, the fluorophore's emission is suppressed. This effect can be used to study molecular geometry and motion.

TaqMan probes are hydrolysis probes that are designed to increase the specificity of quantitative PCR. The method was first reported in 1991 by researcher Kary Mullis at Cetus Corporation, and the technology was subsequently developed by Hoffmann-La Roche for diagnostic assays and by Applied Biosystems for research applications.

SNP genotyping is the measurement of genetic variations of single nucleotide polymorphisms (SNPs) between members of a species. It is a form of genotyping, which is the measurement of more general genetic variation. SNPs are one of the most common types of genetic variation. An SNP is a single base pair mutation at a specific locus, usually consisting of two alleles. SNPs are found to be involved in the etiology of many human diseases and are becoming of particular interest in pharmacogenetics. Because SNPs are conserved during evolution, they have been proposed as markers for use in quantitative trait loci (QTL) analysis and in association studies in place of microsatellites. The use of SNPs is being extended in the HapMap project, which aims to provide the minimal set of SNPs needed to genotype the human genome. SNPs can also provide a genetic fingerprint for use in identity testing. The increase of interest in SNPs has been reflected by the furious development of a diverse range of SNP genotyping methods.

Multiplex ligation-dependent probe amplification (MLPA) is a variation of the multiplex polymerase chain reaction that permits amplification of multiple targets with only a single primer pair. It detects copy number changes at the molecular level, and software programs are used for analysis. Identification of deletions or duplications can indicate pathogenic mutations, thus MLPA is an important diagnostic tool used in clinical pathology laboratories worldwide.

<span class="mw-page-title-main">Bisulfite sequencing</span> Lab procedure detecting 5-methylcytosines in DNA

Bisulfitesequencing (also known as bisulphite sequencing) is the use of bisulfite treatment of DNA before routine sequencing to determine the pattern of methylation. DNA methylation was the first discovered epigenetic mark, and remains the most studied. In animals it predominantly involves the addition of a methyl group to the carbon-5 position of cytosine residues of the dinucleotide CpG, and is implicated in repression of transcriptional activity.

The detection of genetically modified organisms in food or feed is possible by biochemical means. It can either be qualitative, showing which genetically modified organism (GMO) is present, or quantitative, measuring in which amount a certain GMO is present. Being able to detect a GMO is an important part of GMO labeling, as without detection methods the traceability of GMOs would rely solely on documentation.

Loop-mediated isothermal amplification (LAMP) is a single-tube technique for the amplification of DNA and a low-cost alternative to detect certain diseases. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) combines LAMP with a reverse transcription step to allow the detection of RNA.

The versatility of polymerase chain reaction (PCR) has led to modifications of the basic protocol being used in a large number of variant techniques designed for various purposes. This article summarizes many of the most common variations currently or formerly used in molecular biology laboratories; familiarity with the fundamental premise by which PCR works and corresponding terms and concepts is necessary for understanding these variant techniques.

High Resolution Melt (HRM) analysis is a powerful technique in molecular biology for the detection of mutations, polymorphisms and epigenetic differences in double-stranded DNA samples. It was discovered and developed by Idaho Technology and the University of Utah. It has advantages over other genotyping technologies, namely:

A primer dimer (PD) is a potential by-product in the polymerase chain reaction (PCR), a common biotechnological method. As its name implies, a PD consists of two primer molecules that have attached (hybridized) to each other because of strings of complementary bases in the primers. As a result, the DNA polymerase amplifies the PD, leading to competition for PCR reagents, thus potentially inhibiting amplification of the DNA sequence targeted for PCR amplification. In quantitative PCR, PDs may interfere with accurate quantification.

Multiplex polymerase chain reaction refers to the use of polymerase chain reaction to amplify several different DNA sequences simultaneously. This process amplifies DNA in samples using multiple primers and a temperature-mediated DNA polymerase in a thermal cycler. The primer design for all primers pairs has to be optimized so that all primer pairs can work at the same annealing temperature during PCR.

A quantitative PCR instrument is a machine that amplifies and detects DNA. It combines the functions of a thermal cycler and a fluorimeter, enabling the process of quantitative PCR.

The terms "relative fluorescence units" (RFU) and "RFU peak" refer to measurements in electrophoresis methods, such as for DNA analysis. A "relative fluorescence unit" is a unit of measurement used in analysis which employs fluorescence detection. Fluorescence is detected using a charged coupled device (CCD) array, when the labeled fragments, which are separated within a capillary by using electrophoresis, are energized by laser light and travel across the detection window. A computer program measures the results, determining the quantity or size of the fragments, at each data point, from the level of fluorescence intensity. Samples which contain higher quantities of amplified DNA will have higher corresponding RFU values.

Multiple Annealing and Looping Based Amplification Cycles (MALBAC) is a quasilinear whole genome amplification method. Unlike conventional DNA amplification methods that are non-linear or exponential, MALBAC utilizes special primers that allow amplicons to have complementary ends and therefore to loop, preventing DNA from being copied exponentially. This results in amplification of only the original genomic DNA and therefore reduces amplification bias. MALBAC is “used to create overlapped shotgun amplicons covering most of the genome”. For next generation sequencing, MALBAC is followed by regular PCR which is used to further amplify amplicons.

<span class="mw-page-title-main">Kompetitive allele specific PCR</span>

Kompetitive allele specific PCR (KASP) is a homogenous, fluorescence-based genotyping variant of polymerase chain reaction. It is based on allele-specific oligo extension and fluorescence resonance energy transfer for signal generation.

References

  1. ↑ Ansevin, A.T.; Vizard, D.L.; Brown, B.W.; McConathy, J. (1976), "High-resolution thermal denaturation of DNA. I. Theoretical and practical considerations for the resolution of thermal subtransitions", Biopolymers, 15 (1): 153–74, doi:10.1002/bip.1976.360150111, PMID   1244898
  2. ↑ Ririe, K.M.; Rasmussen, R.P.; Wittwer, C.T. (1997), "Product differentiation by analysis of DNA melting curves during the polymerase chain reaction", Anal. Biochem., 245 (2): 154–60, doi:10.1006/abio.1996.9916, PMID   9056205
  3. 1 2 Hou, Shaw (2010). Biocatalysis and Biomolecular Engineering. John Wiley & Sons. pp. 314–317.
  4. ↑ Ririe, 1997
  5. ↑ Lay MJ, Wittwer CT. (1997) Real-time fluorescence genotyping of factor V Leiden during rapid-cycle PCR. Clin Chem. 1997 Dec;43(12):2262-7
  6. ↑ Wienken CJ, Baaske P, Duhr S, Braun D (2011), "Thermophoretic melting curves quantify the conformation and stability of RNA and DNA", Nucleic Acids Research, 39 (8): e52–e52, doi:10.1093/nar/gkr035, PMC   3082908 , PMID   21297115.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.