Metamaterial absorber

Last updated

A metamaterial absorber [1] is a type of metamaterial intended to efficiently absorb electromagnetic radiation such as light. Furthermore, metamaterials are an advance in materials science. Hence, those metamaterials that are designed to be absorbers offer benefits over conventional absorbers such as further miniaturization, wider adaptability, and increased effectiveness. Intended applications for the metamaterial absorber include emitters, photodetectors, sensors, spatial light modulators, infrared camouflage, wireless communication, and use in solar photovoltaics and thermophotovoltaics.

Contents

For practical applications, the metamaterial absorbers can be divided into two types: narrow band and broadband. [2] [3] For example, metamaterial absorbers can be used to improve the performance of photodetectors. [2] [4] [5] [6] Metamaterial absorbers can also be used for enhancing absorption in both solar photovoltaic [7] [8] and thermo-photovoltaic [9] [10] applications. Skin depth engineering can be used in metamaterial absorbers in photovoltaic applications as well as other optoelectronic devices, where optimizing the device performance demands minimizing resistive losses and power consumption, such as photodetectors, laser diodes, and light emitting diodes. [11]

In addition, the advent of metamaterial absorbers enable researchers to further understand the theory of metamaterials which is derived from classical electromagnetic wave theory. This leads to understanding the material's capabilities and reasons for current limitations. [1]

Unfortunately, achieving broadband absorption, especially in the THz region (and higher frequencies), still remains a challenging task because of the intrinsically narrow bandwidth of surface plasmon polaritons (SPPs) or localized surface plasmon resonances (LSPRs) generated on metallic surfaces at the nanoscale, which are exploited as a mechanism to obtain perfect absorption. [2]

Metamaterials

Metamaterials are artificial materials which exhibit unique properties which do not occur in nature. These are usually arrays of structures which are smaller than the wavelength they interact with. These structures have the capability to control electromagnetic radiation in unique ways that are not exhibited by conventional materials. It is the spacing and shape of a given metamaterial's components that define its use and the way it controls electromagnetic radiation. Unlike most conventional materials, researchers in this field can physically control electromagnetic radiation by altering the geometry of the material's components. Metamaterial structures are used in a wide range of applications and across a broad frequency range from radio frequencies, to microwave, terahertz, across the infrared spectrum and almost to visible wavelengths. [1]

Absorbers

"An electromagnetic absorber neither reflects nor transmits the incident radiation. Therefore, the power of the impinging wave is mostly absorbed in the absorber materials. The performance of an absorber depends on its thickness and morphology, and also the materials used to fabricate it." [12]

"A near unity absorber is a device in which all incident radiation is absorbed at the operating frequency–transmissivity, reflectivity, scattering and all other light propagation channels are disabled. Electromagnetic (EM) wave absorbers can be categorized into two types: resonant absorbers and broadband absorbers. [2] [13]

Principal conceptions

A metamaterial absorber utilizes the effective medium design of metamaterials and the loss components of permittivity and magnetic permeability to create a material that has a high ratio of electromagnetic radiation absorption. Loss is noted in applications of negative refractive index (photonic metamaterials, antenna systems metamaterials) or transformation optics (metamaterial cloaking, celestial mechanics), but is typically undesired in these applications. [1] [14]

Complex permittivity and permeability are derived from metamaterials using the effective medium approach. As effective media, metamaterials can be characterized with complex ε(w) = ε1 + iε2 for effective permittivity and µ(w) = µ1 + i µ2 for effective permeability. Complex values of permittivity and permeability typically correspond to attenuation in a medium. Most of the work in metamaterials is focused on the real parts of these parameters, which relate to wave propagation rather than attenuation. The loss (imaginary) components are small in comparison to the real parts and are often neglected in such cases.

However, the loss terms (ε2 and µ2) can also be engineered to create high attenuation and correspondingly large absorption. By independently manipulating resonances in ε and µ it is possible to absorb both the incident electric and magnetic field. Additionally, a metamaterial can be impedance-matched to free space by engineering its permittivity and permeability, minimizing reflectivity. Thus, it becomes a highly capable absorber. [1] [14] [15]

This approach can be used to create thin absorbers. Typical conventional absorbers are thick compared to wavelengths of interest, [16] which is a problem in many applications. Since metamaterials are characterized based on their subwavelength nature, they can be used to create effective yet thin absorbers. This is not limited to electromagnetic absorption either. [16]

See also

Related Research Articles

<span class="mw-page-title-main">Plasmon</span> Quasiparticle of charge oscillations in condensed matter

In physics, a plasmon is a quantum of plasma oscillation. Just as light consists of photons, the plasma oscillation consists of plasmons. The plasmon can be considered as a quasiparticle since it arises from the quantization of plasma oscillations, just like phonons are quantizations of mechanical vibrations. Thus, plasmons are collective oscillations of the free electron gas density. For example, at optical frequencies, plasmons can couple with a photon to create another quasiparticle called a plasmon polariton.

<span class="mw-page-title-main">Metamaterial</span> Materials engineered to have properties that have not yet been found in nature

A metamaterial is any material engineered to have a property that is rarely observed in naturally occurring materials. They are made from assemblies of multiple elements fashioned from composite materials such as metals and plastics. These materials are usually arranged in repeating patterns, at scales that are smaller than the wavelengths of the phenomena they influence. Metamaterials derive their properties not from the properties of the base materials, but from their newly designed structures. Their precise shape, geometry, size, orientation and arrangement gives them their smart properties capable of manipulating electromagnetic waves: by blocking, absorbing, enhancing, or bending waves, to achieve benefits that go beyond what is possible with conventional materials.

Nanophotonics or nano-optics is the study of the behavior of light on the nanometer scale, and of the interaction of nanometer-scale objects with light. It is a branch of optics, optical engineering, electrical engineering, and nanotechnology. It often involves dielectric structures such as nanoantennas, or metallic components, which can transport and focus light via surface plasmon polaritons.

<span class="mw-page-title-main">Split-ring resonator</span> A resonator

A split-ring resonator (SRR) is an artificially produced structure common to metamaterials. Its purpose is to produce the desired magnetic susceptibility in various types of metamaterials up to 200 terahertz.

<span class="mw-page-title-main">Negative-index metamaterial</span> Material with a negative refractive index

Negative-index metamaterial or negative-index material (NIM) is a metamaterial whose refractive index for an electromagnetic wave has a negative value over some frequency range.

<span class="mw-page-title-main">Terahertz metamaterial</span>

A terahertz metamaterial is a class of composite metamaterials designed to interact at terahertz (THz) frequencies. The terahertz frequency range used in materials research is usually defined as 0.1 to 10 THz.

<span class="mw-page-title-main">Metamaterial antenna</span>

Metamaterial antennas are a class of antennas which use metamaterials to increase performance of miniaturized antenna systems. Their purpose, as with any electromagnetic antenna, is to launch energy into free space. However, this class of antenna incorporates metamaterials, which are materials engineered with novel, often microscopic, structures to produce unusual physical properties. Antenna designs incorporating metamaterials can step-up the antenna's radiated power.

<span class="mw-page-title-main">Tunable metamaterial</span>

A tunable metamaterial is a metamaterial with a variable response to an incident electromagnetic wave. This includes remotely controlling how an incident electromagnetic wave interacts with a metamaterial. This translates into the capability to determine whether the EM wave is transmitted, reflected, or absorbed. In general, the lattice structure of the tunable metamaterial is adjustable in real time, making it possible to reconfigure a metamaterial device during operation. It encompasses developments beyond the bandwidth limitations in left-handed materials by constructing various types of metamaterials. The ongoing research in this domain includes electromagnetic materials that are very meta which mean good and has a band gap metamaterials (EBG), also known as photonic band gap (PBG), and negative refractive index material (NIM).

<span class="mw-page-title-main">Photonic metamaterial</span> Type of electromagnetic metamaterial

A photonic metamaterial (PM), also known as an optical metamaterial, is a type of electromagnetic metamaterial, that interacts with light, covering terahertz (THz), infrared (IR) or visible wavelengths. The materials employ a periodic, cellular structure.

A plasmonic-enhanced solar cell, commonly referred to simply as plasmonic solar cell, is a type of solar cell that converts light into electricity with the assistance of plasmons, but where the photovoltaic effect occurs in another material.

A nonlinear metamaterial is an artificially constructed material that can exhibit properties not yet found in nature. Its response to electromagnetic radiation can be characterized by its permittivity and material permeability. The product of the permittivity and permeability results in the refractive index. Unlike natural materials, nonlinear metamaterials can produce a negative refractive index. These can also produce a more pronounced nonlinear response than naturally occurring materials.

<span class="mw-page-title-main">Metamaterial cloaking</span> Shielding an object from view using materials made to redirect light

Metamaterial cloaking is the usage of metamaterials in an invisibility cloak. This is accomplished by manipulating the paths traversed by light through a novel optical material. Metamaterials direct and control the propagation and transmission of specified parts of the light spectrum and demonstrate the potential to render an object seemingly invisible. Metamaterial cloaking, based on transformation optics, describes the process of shielding something from view by controlling electromagnetic radiation. Objects in the defined location are still present, but incident waves are guided around them without being affected by the object itself.

<span class="mw-page-title-main">History of metamaterials</span>

The history of metamaterials begins with artificial dielectrics in microwave engineering as it developed just after World War II. Yet, there are seminal explorations of artificial materials for manipulating electromagnetic waves at the end of the 19th century. Hence, the history of metamaterials is essentially a history of developing certain types of manufactured materials, which interact at radio frequency, microwave, and later optical frequencies.

<span class="mw-page-title-main">Transformation optics</span> Branch of optics which studies how EM radiation can be manipulated with metamaterials

Transformation optics is a branch of optics which applies metamaterials to produce spatial variations, derived from coordinate transformations, which can direct chosen bandwidths of electromagnetic radiation. This can allow for the construction of new composite artificial devices, which probably could not exist without metamaterials and coordinate transformation. Computing power that became available in the late 1990s enables prescribed quantitative values for the permittivity and permeability, the constitutive parameters, which produce localized spatial variations. The aggregate value of all the constitutive parameters produces an effective value, which yields the intended or desired results.

<span class="mw-page-title-main">Coherent perfect absorber</span>

A coherent perfect absorber (CPA), or anti-laser, is a device which absorbs coherent waves, such as coherent light waves, and converts them into some form of internal energy, e.g. heat or electrical energy. It is the time-reversed counterpart of a laser. Coherent perfect absorption allows control of waves with waves without a nonlinear medium. The concept was first published in the July 26, 2010, issue of Physical Review Letters, by a team at Yale University led by theorist A. Douglas Stone and experimental physicist Hui W. Cao. In the September 9, 2010, issue of Physical Review A, Stefano Longhi of Polytechnic University of Milan showed how to combine a laser and an anti-laser in a single device. In February 2011 the team at Yale built the first working anti-laser. It is a two-channel CPA device which absorbs two beams from the same laser, but only when the beams have the correct phases and amplitudes. The initial device absorbed 99.4 percent of all incoming light, but the team behind the invention believe it will be possible to achieve 99.999 percent. Originally implemented as a Fabry-Pérot cavity that is many wavelengths thick, the optical CPA operates at specific optical frequencies. In January 2012, thin-film CPA has been proposed by utilizing the achromatic dispersion of metal-like materials, exhibiting the unparalleled bandwidth and thin profile advantages. Shortly after, CPA was observed in various thin film materials, including photonic metamaterial, multi-layer graphene, single and multiple layers of chromium, as well as microwave metamaterial.

<span class="mw-page-title-main">Surface plasmon polariton</span> Electromagnetic waves that travel along an interface

Surface plasmon polaritons (SPPs) are electromagnetic waves that travel along a metal–dielectric or metal–air interface, practically in the infrared or visible-frequency. The term "surface plasmon polariton" explains that the wave involves both charge motion in the metal and electromagnetic waves in the air or dielectric ("polariton").

A plasmonic metamaterial is a metamaterial that uses surface plasmons to achieve optical properties not seen in nature. Plasmons are produced from the interaction of light with metal-dielectric materials. Under specific conditions, the incident light couples with the surface plasmons to create self-sustaining, propagating electromagnetic waves known as surface plasmon polaritons (SPPs). Once launched, the SPPs ripple along the metal-dielectric interface. Compared with the incident light, the SPPs can be much shorter in wavelength.

Electromagnetic absorbers are specifically chosen or designed materials that can inhibit the reflection or transmission of electromagnetic radiation. For example, this can be accomplished with materials such as dielectrics combined with metal plates spaced at prescribed intervals or wavelengths. The particular absorption frequencies, thickness, component arrangement and configuration of the materials also determine capabilities and uses. In addition, researchers are studying advanced materials such as metamaterials in hopes of improved performance and diversity of applications. Some intended applications for the new absorbers include emitters, sensors, spatial light modulators, infrared camouflage, wireless communication, and use in thermophotovoltaics.

<span class="mw-page-title-main">Electromagnetic metasurface</span>

An electromagnetic metasurface refers to a kind of artificial sheet material with sub-wavelength thickness. Metasurfaces can be either structured or unstructured with subwavelength-scaled patterns in the horizontal dimensions.

Spoof surface plasmons, also known as spoof surface plasmon polaritons and designer surface plasmons, are surface electromagnetic waves in microwave and terahertz regimes that propagate along planar interfaces with sign-changing permittivities. Spoof surface plasmons are a type of surface plasmon polariton, which ordinarily propagate along metal and dielectric interfaces in infrared and visible frequencies. Since surface plasmon polaritons cannot exist naturally in microwave and terahertz frequencies due to dispersion properties of metals, spoof surface plasmons necessitate the use of artificially-engineered metamaterials.

References

  1. 1 2 3 4 5 Landy NI, et al. (21 May 2008). "Perfect Metamaterial Absorber" (PDF). Phys. Rev. Lett. 100 (20): 207402 (2008) [4 pages]. arXiv: 0803.1670 . Bibcode:2008PhRvL.100t7402L. doi:10.1103/PhysRevLett.100.207402. PMID   18518577. S2CID   13319253. Archived from the original (PDF) on 4 June 2011. Retrieved 22 January 2010.
  2. 1 2 3 4 Yu, Peng; Besteiro, Lucas V.; Huang, Yongjun; Wu, Jiang; Fu, Lan; Tan, Hark H.; Jagadish, Chennupati; Wiederrecht, Gary P.; Govorov, Alexander O. (2018). "Broadband Metamaterial Absorbers". Advanced Optical Materials. 7 (3): 1800995. doi: 10.1002/adom.201800995 . hdl: 1885/213159 . ISSN   2195-1071.
  3. ↑ de Oliveira Neto, A. M.; Beccaro, W.; de Oliveira, A. M.; Justo, J.F. (2023). "Exploring the Internal Patterns in the Design of Ultrawideband Microwave Absorbers". IEEE Antennas and Wireless Propagation Letters. 22 (9): 2290-2294. doi:10.1109/LAWP.2023.3284650.
  4. ↑ Li, W.; Valentine, J. (2014). "Metamaterial Perfect Absorber Based Hot Electron Photodetection". Nano Letters. 14 (6): 3510–3514. Bibcode:2014NanoL..14.3510L. doi:10.1021/nl501090w. PMID   24837991.
  5. ↑ Yu, Peng; Wu, Jiang; Ashalley, Eric; Govorov, Alexander; Wang, Zhiming (2016). "Dual-band absorber for multispectral plasmon-enhanced infrared photodetection" (PDF). Journal of Physics D: Applied Physics. 49 (36): 365101. Bibcode:2016JPhD...49J5101Y. doi:10.1088/0022-3727/49/36/365101. ISSN   0022-3727. S2CID   123927835.
  6. ↑ Awad, Ehab (21 June 2022). "Graphene Metamaterial Embedded within Bundt Optenna for Ultra-Broadband Infrared Enhanced Absorption". Nanomaterials. 12 (13): 2131. doi: 10.3390/nano12132131 . PMC   9268047 . PMID   35807966.
  7. ↑ Vora, A.; Gwamuri, J.; Pala, N.; Kulkarni, A.; Pearce, J.M.; Güney, D. Ö. (2014). "Exchanging ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics". Sci. Rep. 4: 4901. arXiv: 1404.7069 . Bibcode:2014NatSR...4E4901V. doi:10.1038/srep04901. PMC   4014987 . PMID   24811322.
  8. ↑ Wang, Y.; Sun, T.; Paudel, T.; Zhang, Y.; Ren, Z.; Kempa, K. (2011). "Metamaterial-plasmonic absorber structure for high efficiency amorphous silicon solar cells". Nano Letters. 12 (1): 440–445. Bibcode:2012NanoL..12..440W. doi:10.1021/nl203763k. PMID   22185407.
  9. ↑ Wu, C.; Neuner III, B.; John, J.; Milder, A.; Zollars, B.; Savoy, S.; Shvets, G. (2012). "Metamaterial-based integrated plasmonic absorber/emitter for solar thermo-photovoltaic systems". Journal of Optics. 14 (2): 024005. Bibcode:2012JOpt...14b4005W. doi:10.1088/2040-8978/14/2/024005. S2CID   120371536.
  10. ↑ Simovski, Constantin; Maslovski, Stanislav; Nefedov, Igor; Tretyakov, Sergei (2013). "Optimization of radiative heat transfer in hyperbolic metamaterials for thermophotovoltaic applications". Optics Express. 21 (12): 14988–15013. Bibcode:2013OExpr..2114988S. doi: 10.1364/oe.21.014988 . PMID   23787687.
  11. ↑ Adams, Wyatt; Vora, Ankit; Gwamuri, Jephias; Pearce, Joshua M.; Guney, Durdu Ö. (2015). Subramania, Ganapathi S; Foteinopoulou, Stavroula (eds.). "Controlling optical absorption in metamaterial absorbers for plasmonic solar cells". Proc. SPIE 9546, Active Photonic Materials VII. Active Photonic Materials VII. 9546: 95461M. Bibcode:2015SPIE.9546E..1MA. doi:10.1117/12.2190396. S2CID   8271761.
  12. ↑ Alici, Kamil Boratay; Bilotti, Filiberto; Vegni, Lucio; Ozbay, Ekmel (2010). "Experimental verification of metamaterial based subwavelength microwave absorbers" (Free PDF download). Journal of Applied Physics. 108 (8): 083113–083113–6. Bibcode:2010JAP...108h3113A. doi:10.1063/1.3493736. hdl: 11693/11975 . S2CID   51963014.
  13. ↑ Watts, Claire M.; Liu, Xianliang; Padilla, Willie J. (2012). "Metamaterial Electromagnetic Wave Absorbers". Advanced Materials. 24 (23): OP98–OP120. Bibcode:2012AdM....24P..98W. doi: 10.1002/adma.201200674 . PMID   22627995.
  14. 1 2 Tao, Hu; et al. (12 May 2008). "A metamaterial absorber for the terahertz regime: Design, fabrication and characterization" (PDF). Optics Express. 16 (10): 7181–7188. arXiv: 0803.1646 . Bibcode:2008OExpr..16.7181T. doi:10.1364/OE.16.007181. PMID   18545422. S2CID   15714828. Archived from the original (Free PDF download) on 4 June 2011. Retrieved 22 January 2010.
  15. ↑ Yu, Peng; Besteiro, Lucas V.; Wu, Jiang; Huang, Yongjun; Wang, Yueqi; Govorov, Alexander O.; Wang, Zhiming (6 August 2018). "Metamaterial perfect absorber with unabated size-independent absorption". Optics Express. 26 (16): 20471–20480. Bibcode:2018OExpr..2620471Y. doi: 10.1364/OE.26.020471 . ISSN   1094-4087. PMID   30119357.
  16. 1 2 Yang, Z.; et al. (2010). "Acoustic metamaterial panels for sound attenuation in the 50–1000 Hz regime". Appl. Phys. Lett. 96 (4): 041906 [3 pages]. Bibcode:2010ApPhL..96d1906Y. doi:10.1063/1.3299007. S2CID   123233731.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.