Mexia-Nelleva Cutoff

Last updated

The Mexia-Nelleva Cutoff was a railroad cutoff constructed between Nelleva and Mexia, in eastern Texas. It has not been used since 1933, when it was abandoned by its owner, the Houston and Texas Central Railway (H&TC). [1]

History

Construction of the Mexia-Nelleva Cutoff started in 1905. The new 94-mile (152 km) line was built to shorten the distance between the Texas towns of Nelleva, a small community on the north side of Navasota, and Mexia. E.H. Harriman, who controlled the Union Pacific and the Southern Pacific spearheaded construction of the cutoff. Both Mexia and Nelleva were on the existing H&TC railway between Houston and Dallas via Hearn. The new cutoff would shorten the existing route by about 15 miles (24 km) with lower grades and fewer curves.

Portions of the route of the Mexia-Nelleva Cutoff would be immediately adjacent to B. F. Yoakum's line, the Gulf Coast Lines, part of a collection of routes planned to link south Texas with New Orleans. (Yoakum also controlled the St. Louis–San Francisco Railway (the "Frisco") and the Chicago, Rock Island and Pacific Railroad. Both were major midwestern systems with rails reaching into north Texas from Oklahoma.) The 94-mile cutoff was completed in 1907 [2] in time to compete with Yoakum's new Trinity and Brazos Valley Railway (T&BV) line, which Yoakum had gained control of in 1904.

Over the years, Yoakum's line flourished due primarily to the connecting traffic provided by the other railroads Yoakum controlled. Eventually, Yoakum lost control of these railroads and the T&BV's traffic suffered; the line went into a 16-year receivership from which it emerged in 1930 controlled by a partnership of the Rock Island and the Burlington System. Today, it is the BNSF main line between Waxahachie and Houston.

By contrast, Harriman's Mexia-Nelleva Cutoff had virtually no local traffic provided by the small communities on the line. And while it was faster than the H&TC line via Hearne for through trains, the marginal increase in speed was insufficient to cover the costs of maintaining an additional route between the two endpoints.

In the end, it may have been SP's competition with the Texas and Pacific Railway between Texarkana and El Paso that finally doomed the Mexia-Nelleva Cutoff. The T&P could carry transcontinental traffic directly across Texas and interchange it with the SP in El Paso. This service competed favorably with SP's much longer route across Texas that required a connection with the Sunset Route at Houston. To improve the situation, SP opened the Dalsa Cutoff in 1914 between Hearne and Flatonia, shortening the route across Texas by 140 miles (226 km). Through freights that might previously have been routed via the Mexia-Nelleva Cutoff and the Sunset Route connecting at Houston could now bypass Houston, Texas altogether. With stiff competition from the T&BV for the Gulf coast traffic, a diversion of transcontinental freight traffic to the Dalsa Cutoff, and virtually no local traffic, the Mexia-Nelleva Cutoff was doomed; it was finally abandoned in 1933.

Of the 94 mile route between Mexia and Nelleva, approximately 80 miles (129 km) of it has been preserved as a transportation corridor in one form or another. Most of this is part of Farm to Market Road 39, which is constructed atop the old right-of-way between Iola and Mexia, a distance of roughly 71 miles (114 km). A one mile section of Farm to Market Road 3090 near the community of Piedmont is built on the right-of-way as is a three mile Grimes County gravel road near the community of Carlos (at the intersection of State Highway 30 and Farm to Market Road 244).

In 1977, five miles of the original cutoff route was rebuilt as a rail spur to serve the Texas Municipal Power Agency's Gibbons Creek Generating Plant south of Iola in Grimes County. The spur connects to the BNSF line that was formerly the rival T&BV line. In 1995 and 1996, an extension to the rail spur was constructed to allow the unloading of coal at the power plant. This extension included a rail loop which was all within the existing plant boundary; a portion of this extension also followed the bed of the old rail line. South of the power plant, the grade serves as a gravel road leading north and south out of Carlos. It can be seen again along FM 3090, near the old community of Piedmont. Except for the brief section of FM3090 built on the right-of-way, there is little access to the old route between Carlos and Nelleva. [3] [4]

Related Research Articles

<span class="mw-page-title-main">BNSF Railway</span> American freight railroad

BNSF Railway is the largest freight railroad in the United States. One of six North American Class I railroads, BNSF has 35,000 employees, 32,500 miles (52,300 km) of track in 28 states, and nearly 8,000 locomotives. It has three transcontinental routes that provide rail connections between the western and eastern United States. BNSF trains traveled over 169 million miles in 2010, more than any other North American railroad.

<span class="mw-page-title-main">Burlington Northern Railroad</span> Former American railroad company

The Burlington Northern Railroad was a United States-based railroad company formed from a merger of four major U.S. railroads. Burlington Northern operated between 1970 and 1996.

<span class="mw-page-title-main">Spokane, Portland and Seattle Railway</span> Defunct American Class I railroad (1908–1970)

The Spokane, Portland & Seattle Railway was a railroad in the northwest United States. Incorporated in 1905, it was a joint venture by the Great Northern Railway and the Northern Pacific Railway to build a railroad along the north bank of the Columbia River. The railroad later built or acquired other routes. Remnants of the line are currently operated by BNSF Railway and the Portland and Western Railroad.

<span class="mw-page-title-main">International–Great Northern Railroad</span> Defunct American railroad company

The International – Great Northern Railroad (I&GN) was a railroad that operated in the U.S. state of Texas. It was created on September 30, 1873, when the International Railroad and the Houston and Great Northern Railroad merged. The railroad was officially incorporated as the International & Great Northern Railroad Company.

<span class="mw-page-title-main">San Joaquin Valley Railroad</span> Central California freight transport company

The San Joaquin Valley Railroad is one of several short line railroad companies and is part of the Western Region Division of Genesee & Wyoming Inc. It operates over about 371 miles (597 km) of owned or leased track primarily on several lines in California's Central Valley/San Joaquin Valley around Fresno and Bakersfield. The SJVR has trackage rights over Union Pacific between Fresno, Goshen, Famoso, Bakersfield and Algoso. The SJVR also operated for the Tulare Valley Railroad (TVRR) from Calwa to Corcoran and Famoso.

<span class="mw-page-title-main">Missouri and Northern Arkansas Railroad</span> Class III shortline railroad in Missouri

The Missouri & Northern Arkansas Railroad, LLC is a Class II Regional Railroad in the U.S. states of Missouri, Kansas, and Arkansas. The company is headquartered in Carthage, Missouri. It is not to be confused with the Missouri and North Arkansas Railroad which connected Joplin, Missouri, with Helena, Arkansas, from 1906 to 1946.

<span class="mw-page-title-main">Texas Mexican Railway</span> Railroad that operated as a subsidiary of the Kansas City Southern Railway

The Texas Mexican Railway was a short line railroad in the U.S. state of Texas operating between Corpus Christi and the Texas Mexican Railway International Bridge in Laredo, Texas. It is often referred to as the Tex-Mex, or TexMex Railway.

<span class="mw-page-title-main">Evansville Western Railway</span>

The Evansville Western Railway is a Class II regional railroad operating in the southern Illinois and Indiana region. It is one of three regional railroad subsidiaries owned and operated by P&L Transportation.

The Beaumont, Sour Lake and Western Railway was an 85-mile (137 km) railroad that ran from Beaumont, Texas to Gulf Coast Junction in Houston. It passed through small southeast Texas communities such as Hull, Kenefick, and Huffman. As part of the Gulf Coast Lines system, the road was eventually merged into the Missouri Pacific Railroad in 1956, which in turn was merged into the Union Pacific Railroad in 1982. The Union Pacific still makes heavy use of the route.

The Burlington-Rock Island Railroad came into existence on July 7, 1930, through the reorganization of its predecessor, the Trinity and Brazos Valley Railway Company (T&BV), nicknamed the "Boll Weevil Line."

Rail transportation is an important element of the transportation network in the U.S. state of Oregon. Rail transportation has existed in Oregon in some form since 1855, and the state was a pioneer in development of electric railway systems. While the automobile has displaced many uses of rail in the state, rail remains a key means of moving passengers and freight, both within the state and to points beyond its borders.

<span class="mw-page-title-main">Southern Transcon</span> Rail corridor owned by BNSF

The Southern Transcon is a main line of BNSF Railway comprising 11 subdivisions between Southern California and Chicago, Illinois. Completed in its current alignment in 1908 by the Atchison, Topeka and Santa Fe Railway, when it opened the Belen Cutoff in New Mexico and bypassed the steep grades of Raton Pass, it now serves as a mostly double-tracked intermodal corridor.

<span class="mw-page-title-main">Texas Northeastern Railroad</span> American shortline railroad

The Texas Northeastern Railroad is a Class III railroad operating in the United States state of Texas that began operations in 1990. It consists of 104 miles (167 km) of track on two lines.

The MN&S Spur is a 18.5-mile (29.8 km) railroad line operated by the Progressive Rail Inc. The route runs through suburbs immediately west of Minneapolis, Minnesota, from MN&S Junction in Crystal south to Auto Club Junction in Bloomington near the Minnesota River. This path is parallel to Minnesota State Highway 100, which is about half a mile east of the rail line.

The Houston and Texas Central Railway (H&TC) was an 872-mile (1403-km) railway system chartered in Texas in 1848, with construction beginning in 1856. The line eventually stretched from Houston northward to Dallas and Denison, Texas, with branches to Austin and Waco.

<span class="mw-page-title-main">Ripley and New Albany Railroad</span> Shortline railroad in Mississippi, United States

The Ripley & New Albany Railroad is a 27-mile long (43 km) shortline railroad that runs from New Albany to Falkner, Mississippi, and previously extended from Houston, Mississippi, to Middleton, Tennessee, along former Gulf, Mobile and Ohio Railroad trackage. RNA interchanges with the BNSF Railway in New Albany, Mississippi. It primarily hauls lumber products and Oil-Dri.

<span class="mw-page-title-main">Trinity and Brazos Valley Railway</span>

The Trinity and Brazos Valley Railway of Texas came into existence on October 7, 1902, originally chartered to build a railroad from Johnson County to the Beaumont area near the Gulf coast. It took its name from the Trinity and Brazos rivers. It was commonly known as the “Boll Weevil," though it referred to itself as the "Valley Road."

The Dalsa Cutoff is a 141-mile railroad line which runs from Hearne, Texas to Flatonia, Texas. One segment of the San Antonio and Aransas Pass Railway (SA&AP) lives on as part of the cutoff - the section between Giddings to Flatonia.

The history of the Southern Pacific ("SP") stretched from 1865 to 1998.

References

  1. ↑ "Texas Railroad History - Towers 9 and 41 - Navasota". txrrhistory.com. Retrieved 2023-09-13.
  2. ↑ bobbatson48 (2020-02-27). "HOUSTON AND TEXAS CENTRAL RAILWAY". Hearne Depot. Retrieved 2023-09-13.
  3. ↑ "The Mexia-Nelleva Cutoff - Abandoned Rails". www.abandonedrails.com. Retrieved 2023-09-13.
  4. ↑ "Texas Railroad History - Tower 63 - Mexia". txrrhistory.com. Retrieved 2023-09-13.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.