Mk 6 Assault Boat

Last updated

The Mk 6 Assault Boat is an assault boat used by the Royal Engineers of the British Army. It is usually paddled for a silent or night-time approach, but can be fitted with an outboard motor. Its built from glass reinforced plastic and is light enough to be carried by four men.

Assault boat

An Assault boat is a boat used for making a landing in combat. Meant for inland waters, assault boats were light enough to be carried by several men and paddled, or fitted with an outboard motor for hi-speed operation, manually portable or not.

Royal Engineers corps of the British Army

The Corps of Royal Engineers, usually just called the Royal Engineers (RE), and commonly known as the Sappers, is one of the corps of the British Army.

British Army land warfare branch of the British Armed Forces of the United Kingdom

The British Army is the principal land warfare force of the United Kingdom, a part of British Armed Forces. As of 2018, the British Army comprises just over 81,500 trained regular (full-time) personnel and just over 27,000 trained reserve (part-time) personnel.

The Mk 6 Assault Boat is used as a versatile, general purpose craft that was designed to carry up to 10 fully equipped troops or 1,043 kg of stores. It also makes a useful ferry craft when fitted with an outboard motor. Assault Boats may be stacked six deep for storage or transport. [1]

Whilst basic and often overlooked it has been in constant operational use since its introduction, including conducting patrols on Helmand Reservoir in Afghanistan and proved highly useful in the Southern Iraq Marshes, especially over the last year of British Operations on the Qarmat Ali Waterway, north of Basra where the ability to carry the boat over shallows made it much more employable than the faster but larger Rigid Raider or Combat Support Boat.[ citation needed ]

Afghanistan A landlocked south-central Asian country

Afghanistan, officially the Islamic Republic of Afghanistan, is a landlocked country located in South-Central Asia. Afghanistan is bordered by Pakistan in the south and east; Iran in the west; Turkmenistan, Uzbekistan, and Tajikistan in the north; and in the far northeast, China. Its territory covers 652,000 square kilometers (252,000 sq mi) and much of it is covered by the Hindu Kush mountain range, which experiences very cold winters. The north consists of fertile plains, while the south-west consists of deserts where temperatures can get very hot in summers. Kabul serves as the capital and its largest city.

Iraq Republic in Western Asia

Iraq, officially the Republic of Iraq, is a country in Western Asia, bordered by Turkey to the north, Iran to the east, Kuwait to the southeast, Saudi Arabia to the south, Jordan to the southwest and Syria to the west. The capital, and largest city, is Baghdad. Iraq is home to diverse ethnic groups including Arabs, Kurds, Assyrians, Turkmen, Shabakis, Yazidis, Armenians, Mandeans, Circassians and Kawliya. Around 95% of the country's 37 million citizens are Muslims, with Christianity, Yarsan, Yezidism and Mandeanism also present. The official languages of Iraq are Arabic and Kurdish.

Basra City in Basra Governorate, Iraq

Basra is an Iraqi city located on the Shatt al-Arab between Kuwait and Iran. It had an estimated population of 2.5 million in 2012. Basra is also Iraq's main port, although it does not have deep water access, which is handled at the port of Umm Qasr.

See also

Related Research Articles

Outboard motor self-contained propulsion system for boats

An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorized method of propelling small watercraft. As well as providing propulsion, outboards provide steering control, as they are designed to pivot over their mountings and thus control the direction of thrust. The skeg also acts as a rudder when the engine is not running. Unlike inboard motors, outboard motors can be easily removed for storage or repairs.

Dinghy type of small boat

A dinghy is a type of small boat, often carried or towed for use as a lifeboat or tender by a larger vessel. The term is a loanword from the Bengali ḍiṅgi, Urdu ḍīngī & Hindi ḍieṁgī. Utility dinghies are usually rowboats or have an outboard motor, but while some are rigged for sailing, they are not to be confused with sailing dinghies which are designed first and foremost for this purpose.

Runabout (boat) boat type

A runabout is any small motorboat holding between four and eight people, well suited to moving about on the water. Characteristically 20' to 35' but under 35', runabouts are used for pleasure activities like boating, fishing, and water skiing, as a ship's tender for larger vessels, or in racing. Some common runabout types are bow rider, center console, cuddy boat and walkaround.

Inflatable boat type of lightweight boat

An inflatable boat is a lightweight boat constructed with its sides and bow made of flexible tubes containing pressurised gas. For smaller boats, the floor and hull is often flexible, while for boats longer than 3 metres (9.8 ft), the floor typically consists of three to five rigid plywood or aluminium sheets fixed between the tubes, but not joined rigidly together. Often the transom is rigid, providing a location and structure for mounting an outboard motor.

Landing craft small and medium seagoing vessel used to convey a landing force

Landing craft are small and medium seagoing watercraft such as boats, and barges, used to convey a landing force from the sea to the shore during an amphibious assault. The term excludes landing ships, which are larger. Production of landing craft peaked during World War II, with a significant number of different designs produced in large quantities by the United Kingdom and United States.

Motorboat boat which is powered by an engine

A motorboat, speedboat, or powerboat is a boat which is powered by an engine. Some motorboats are fitted with inboard engines, others have an outboard motor installed on the rear, containing the internal combustion engine, the gearbox and the propeller in one portable unit.

Landing craft tank amphibious assault craft for landing tanks on beachheads

The landing craft, tank was an amphibious assault craft for landing tanks on beachheads. They were initially developed by the British Royal Navy and later by the United States Navy during World War II in a series of versions. Initially known as the "tank landing craft" (TLC) by the British, they later adopted the U.S. nomenclature "landing craft, tank" (LCT). The United States continued to build LCTs post-war, and used them under different designations in the Korean and Vietnam Wars.

Outboard Marine Corporation 1998 power trim

Outboard Marine Corporation (OMC) was a maker of Evinrude, Johnson and Gale Outboard Motors boat motors and many different brands of boats. It was a multibillion-dollar Fortune 500 corporation. Evinrude began in Milwaukee, Wisconsin in 1907. OMC was based in Waukegan, Illinois. They also owned several lines of boats such as Chris Craft, Lowe Boats, Princecraft, Four Winns, SeaSwirl, Stratos, and Javelin. OMC was also a parent company to Ryan, which made lawn mowers.

Landing Craft Utility

The Landing Craft Utility (LCU) is a type of boat used by amphibious forces to transport equipment and troops to the shore. They are capable of transporting tracked or wheeled vehicles and troops from amphibious assault ships to beachheads or piers.

Landing Craft Assault

Landing Craft Assault (LCA) was a landing craft used extensively in World War II. Its primary purpose was to ferry troops from transport ships to attack enemy-held shores. The craft derived from a prototype designed by John I. Thornycroft Ltd. of Woolston, Hampshire, UK. During the war it was manufactured throughout the United Kingdom in places as various as small boatyards and furniture manufacturers.

Inboard motor

An inboard motor is a marine propulsion system for boats. As opposed to an outboard motor where an engine is mounted outside the hull of the craft, an inboard motor is an engine enclosed within the hull of the boat, usually connected to a propulsion screw by a driveshaft.

Coastal Forces of the Royal Navy division of the Royal Navy established during World War II

Coastal Forces was a division of the Royal Navy initially established during World War I, and then again in World War II under the command of Rear-Admiral, Coastal Forces. It remained active until the last minesweepers to wear the "HM Coastal Forces" cap tally were taken out of reserve in 1968.

Hirondelle (catamaran)

The Hirondelle is a fibreglass cruising catamaran, 23 feet (7.0 m) in length, with a beam of 10 feet (3.0 m), and in its standard configuration has 4 or 5 berths. Based on Chris Hammond's 20 ft (6.1 m) 'Meon' cold-moulded/sheet-plywood catamaran of 1967-8, the original design was bought by Brian Carvill in 1969, modified, renamed Hirondelle, and manufactured in fibreglass by Robert Ives Boatbuilders in Christchurch, England.

Amphibious warfare ship Ship used in amphibious warfare

An amphibious warfare ship is an amphibious vehicle warship employed to land and support ground forces, such as marines, on enemy territory during an amphibious assault. The largest fleet of these types is operated by the United States Navy.

The Cedric class formerly known as Arrow class is a series of fast patrol/assault speed boats constructed by the Sri Lanka Navy for use by its littoral warfare units, the elite Special Boat Squadron (SBS) and the Rapid Action Boat Squadron (RABS). The boat is capable of achieving high speeds and is highly maneuverable, meeting the requirements of these units in small boat operations. Armed with an autocannon or automatic grenade launcher as its primary weapon system and with multiple machine guns, the Arrow boats provides relatively high firepower despite its small size. It is also used by the navy for inshore monitoring operations. In 2016 the boat was renamed in honor of Cedric Martenstyn, the Co-founder of the SBS and the lead designer of the boat.

MTSM motor torpedo boat

The MTSM motor torpedo boat was a series of small motor torpedo boats developed by the Italian Royal Navy during World War II. The vessel was an improved version of its predecessor, the motor torpedo boat MTS. This was achieved through a larger sea-going hull with reinforced keel and a sharper stem. The MTSM were designed to be towed by larger motorboats into the target area. Once there, the MTSM could carry out a torpedo attack on moored or stationary ships. The boat could also been transported by land on trailers.

The BRP Leovigildo Gantioqui (PC-384) is the twelfth ship of the Jose Andrada class coastal patrol boats of the Philippine Navy. It is part of the Batch II of its class ordered through US Foreign Military Sales (FMS) in 1993, and was commissioned with the Philippine Navy in 1996.

The BRP Teotimo Figoracion (PC-389) is the eighteenth ship of the Jose Andrada class coastal patrol boats of the Philippine Navy. It is part of the Batch II of its class ordered through US Foreign Military Sales (FMS) in 1993, and was commissioned with the Philippine Navy in 1996.

The BRP Florencio Inigo (PC-393) is the twenty-first ship of the Jose Andrada class coastal patrol boats of the Philippine Navy. It is part of the Batch III of its class ordered through US Foreign Military Sales (FMS) in 1995, and was commissioned with the Philippine Navy in 1998.

References