Modern Welding Company, Inc.

Last updated • 1 min readFrom Wikipedia, The Free Encyclopedia

Modern Welding Company is the country's largest supplier of underground and aboveground steel storage tanks for flammable and combustible liquids. The company also manufactures chemical storage tanks and ASME pressure vessels, performs steel fabrication, [1] and constructs and installs natural gas pipelines. [2] Modern is headquartered in Owensboro, Kentucky and has ten manufacturing subsidiaries throughout the United States.

History

Modern Welding Company was founded in June 1932 in Owensboro, Kentucky in a small shop located near the Ohio River at 1st and Frederica Street where the Commonwealth of Kentucky office building is today. The company was founded by John G. Barnard (1898–1982), known as "Mr. Pete". In 1937 the company expanded with the acquisition of a plant in Madisonville, Kentucky.

Related Research Articles

<span class="mw-page-title-main">Owensboro, Kentucky</span> City in Kentucky, United States

Owensboro is a home rule-class city in and the county seat of Daviess County, Kentucky, United States. It is the fourth-most populous city in the state. Owensboro is located on U.S. Route 60 and Interstate 165 about 107 miles (172 km) southwest of Louisville, and is the principal city of the Owensboro metropolitan area. The 2020 census had its population at 60,183. The metropolitan population was estimated at 116,506. The metropolitan area is the sixth largest in the state as of 2018, and the seventh largest population center in the state when including micropolitan areas.

<span class="mw-page-title-main">Pressure vessel</span> Vessel for pressurised gases or liquids

A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.

<span class="mw-page-title-main">Gas Works Park</span> Public park in Seattle, United States

Gas Works Park is a park located in Seattle, Washington, United States. It has a 19.1-acre (77,000 m2) public park on the site of the former Seattle Gas Light Company gasification plant, located on the north shore of Lake Union at the south end of the Wallingford neighborhood. The park was added to the National Register of Historic Places on January 2, 2013, over a decade after being nominated.

<span class="mw-page-title-main">Fuel tank</span> Safe container for flammable fluids, e.g., for a vehicle or oil heater

A fuel tank is a safe container for flammable fluids, often gasoline or diesel fuel. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propelled or released into an engine. Fuel tanks range in size and complexity from the small plastic tank of a butane lighter to the multi-chambered cryogenic Space Shuttle external tank.

<span class="mw-page-title-main">Gas cylinder</span> Cylindrical container for storing pressurised gas

A gas cylinder is a pressure vessel for storage and containment of gases at above atmospheric pressure. Gas storage cylinders may also be called bottles. Inside the cylinder the stored contents may be in a state of compressed gas, vapor over liquid, supercritical fluid, or dissolved in a substrate material, depending on the physical characteristics of the contents. A typical gas cylinder design is elongated, standing upright on a flattened or dished bottom end or foot ring, with the cylinder valve screwed into the internal neck thread at the top for connecting to the filling or receiving apparatus.

<span class="mw-page-title-main">American Car and Foundry Company</span> Manufacturer of railroad rolling stock

ACF Industries, originally the American Car and Foundry Company, is an American manufacturer of railroad rolling stock. One of its subsidiaries was once (1925–54) a manufacturer of motor coaches and trolley coaches under the brand names of (first) ACF and (later) ACF-Brill. Today, the company is known as ACF Industries LLC and is based in St. Charles, Missouri. It is owned by investor Carl Icahn.

<span class="mw-page-title-main">Boilermaker</span> Tradesperson who fabricates steel, iron, or copper into boilers

A boilermaker is a tradesperson who fabricates steels, iron, or copper into boilers and other large containers intended to hold hot gas or liquid, as well as maintains and repairs boilers and boiler systems.

An oxygen tank is an oxygen storage vessel, which is either held under pressure in gas cylinders, referred to in the industry as high pressure oxygen cylinders, or as liquid oxygen in a cryogenic storage tank.

<span class="mw-page-title-main">PEPCON disaster</span> 1988 explosions and fire in Nevada

On May 4, 1988, a fire followed by several explosions occurred at the Pacific Engineering and Production Company of Nevada (PEPCON) chemical plant in Henderson, Nevada. The disaster caused two fatalities, 372 injuries, and an estimated $100 million of damage. A large portion of the Las Vegas Valley within a 10-mile (16 km) radius of the plant was affected and several agencies activated disaster plans.

Electrogas welding (EGW) is a continuous vertical-position arc welding process developed in 1961 in which an arc is struck between a consumable electrode and the workpiece. A shielding gas is sometimes used, but pressure is not applied. A major difference between EGW and its cousin, electroslag welding, is that the arc in EGW is not extinguished but instead remains struck throughout the welding process. It is used to make square-groove welds for butt and t-joints, especially in the shipbuilding industry and in the construction of storage tanks.

<span class="mw-page-title-main">Pipe (fluid conveyance)</span> Tubular section or hollow cylinder

A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; a hollow pipe is far stiffer per unit weight than the solid members.

<span class="mw-page-title-main">Water tank</span> Container for storing water

A water tank is a container for storing water, for many applications, drinking water, irrigation, fire suppression, farming, both for plants and livestock, chemical manufacturing, food preparation as well as many other uses. Water tank parameters include the general design of the tank, and choice of construction materials, linings. Various materials are used for making a water tank: plastics, fiberglass, concrete, stone, steel. Earthen pots, such as matki used in South Asia, can also be used for water storage. Water tanks are an efficient way to help developing countries to store clean water.

Worthington Enterprises, Inc. is a global diversified metals manufacturing company based in Columbus, Ohio. It is a steel processor and manufacturer of pressure vessels, such as propane, oxygen and helium tanks, hand torches, refrigerant and industrial cylinders, camping cylinders, exploration, recovery and production products for global energy markets; water system tanks for storage, treatment, heating, expansion and flow control, and compressed natural gas storage cylinders. The company also manufactures framing systems for mid-rise buildings and steel pallets and racks for shipping. It is the largest independent processor of flat-rolled steel in the United States. The company takes steel from steel producers and processes it for customers in industries including automotive, lawn and garden, construction, hardware, office furniture, electrical control, leisure and recreation, appliance, agriculture and HVAC.

<span class="mw-page-title-main">Storage tank</span> Container for liquids or compressed gas

Storage tanks are containers that hold liquids or compressed gases. The term can be used for reservoirs, and for manufactured containers. The usage of the word "tank" for reservoirs is uncommon in American English but is moderately common in British English. In other countries, the term tends to refer only to artificial containers. In the U.S., storage tanks operate under no pressure, distinguishing them from pressure vessels.

<span class="mw-page-title-main">Oxy-fuel welding and cutting</span> Metalworking technique using a fuel and oxygen

Oxy-fuel welding torch and oxy-fuel cutting are processes that use fuel gases and oxygen to weld or cut metals. French engineers Edmond Fouché and Charles Picard became the first to develop oxygen-acetylene welding in 1903. Pure oxygen, instead of air, is used to increase the flame temperature to allow localized melting of the workpiece material in a room environment.

<span class="mw-page-title-main">Japan Steel Works</span> Japanese steelmaker

The Japan Steel Works, Ltd. is a steel manufacturer founded in Muroran, Hokkaidō, Japan in 1907.

<span class="mw-page-title-main">Caldwell Tanks</span> American tank manufacturer

Caldwell Tanks is a large privately held company that designs, fabricates, and builds tanks for the water, wastewater, grain, coal and energy industries. Caldwell is the largest elevated tank company in the world. Caldwell has approximately 500 total employees with 206 employees in Louisville at its 20-acre (81,000 m2) headquarters campus. Caldwell has two major facilities: fabrication facilities in Louisville, Kentucky, and Newnan, Georgia.

A Horton sphere, also referred to as a spherical tank or simply sphere, is a spherical pressure vessel, which is used for industrial-scale storage of liquefied gases. Example of materials that can be stored in Horton spheres are liquefied petroleum gas (LPG), liquefied natural gas (LNG), and anhydrous ammonia.

<span class="mw-page-title-main">A. O. Smith</span> American manufacturer

A. O. Smith Corporation is an American manufacturer of both residential and commercial water heaters and boilers, and the largest manufacturer and marketer of water heaters in North America. It also supplies water treatment and water purification products in the Asian market. The company has 27 locations worldwide, including five manufacturing facilities in North America, as well as plants in Bengaluru in India, Nanjing in China and Veldhoven in The Netherlands.

<span class="mw-page-title-main">Concord Gas Light Company Gasholder House</span> United States historic place

The Concord Gas Light Company Gasholder House is a historic gasholder house at Gas Street in Concord, New Hampshire. Built in 1888, it is believed to be the only such structure in the United States in which the enclosed gas containment unit is essentially intact. It was listed on the National Register of Historic Places in 2018. Since 2012, it has been owned by Liberty Utilities, a gas, water and electric company. In 2022, Liberty struck a deal with the city of Concord and the New Hampshire Preservation Alliance to begin emergency stabilization work on the building, so that planning for protection and future use can continue.

References

  1. "About Us". Modern Welding Company. Retrieved September 29, 2010.
  2. "Gas Line Building Starts Next Week". The Times Daily (Florence, Alabama). October 11, 1950. Retrieved July 25, 2012.