Montech water slope

Last updated
The Montech water slope; movable gate raised PenteEauMontech.jpg
The Montech water slope; movable gate raised

The Montech water slope is a type of canal inclined plane built on the Canal de Garonne, in the commune of Montech, Tarn-et-Garonne, Southwest France. It is managed by the publicly owned Voies navigables de France and by-passes a series of five locks. The slope is used for larger vessels up to 40 metres in length, while smaller boats continue to use the locks.

Contents

The slope has been out of service since an engine failure in 2009, and was scheduled to reopen in the summer of 2020 but in 2023 was still not working.

Operating principles

The principle of the water slope is based on a sloping channel up or down which a wedge of water retained by an (almost) watertight gate is moved. This technique was invented in the 19th century by the German engineer Julius Greve and described by the French engineer Jean Aubert [1] in 1961. [2] [3] The Montech water slope was inaugurated in July 1974.

An evenly sloping concrete channel is fitted with a gate at the top, round which a continuous trickle of water is allowed to flow, to compensate for any leakage. The lower gate, which can be lifted, is mounted on a yoke between two ex-railway locomotives, which run on concrete tracks either side of the channel.

To allow a boat to ascend, the lower gate is lifted, the boat enters the channel, and then the gate is lowered behind it, leaving it floating on an isolated a wedge of water. The locomotives ascend the slope, pushing the water wedge in front of the lower gate. When the water level in the wedge matches that of the upper canal, the upper gate is opened and the boat is allowed to float free. To descend the process is reversed.

Details of the machinery

Montech water slope railway locomotives France - Montech - Automotrices de la pente d'eau - 2005-01-15.JPG
Montech water slope railway locomotives

By virtue of its power and ingenuity the slope's mobile barrier is the key to the system. It consists of:

Each diesel electric locomotive has a power of 750 kilowatts (1,000 hp) distributed to drive motors on each of the four axles, each with two large pneumatic tyres.

The three contact faces of the gate with the channel are equipped with seals to keep the wedge of water in place. The gate is raised or lowered using a hydraulic ram.

The shock absorber is a hydraulically levelled hinged metal frame. It allows boats to be connected to the gate during ascents and descents. An electronic system keeps motion gentle and smooth. Finally triple brakes slow the system without jerks.

Design features

Publicity

The Montech water slope was featured in an episode of the 2005 BBC television series Rick Stein's French Odyssey.

Shown as a segment of "Mysteries of the Abandoned" (2018) S2:E7 - Amazon Ghost Town Science Channel

Also featured in an episode of "Abandoned Engineering" on the Yesterday channel in the UK (Series 2, episode 6).

See also

Further reading

Related Research Articles

<span class="mw-page-title-main">Canal</span> Artificial channel for water

Canals or artificial waterways are waterways or engineered channels built for drainage management or for conveyancing water transport vehicles. They carry free, calm surface flow under atmospheric pressure, and can be thought of as artificial rivers.

<span class="mw-page-title-main">Aire and Calder Navigation</span> Canal in West Yorkshire, England

The Aire and Calder Navigation is the canalised section of the Rivers Aire and Calder in West Yorkshire, England. The first improvements to the rivers above Knottingley were completed in 1704 when the Aire was made navigable to Leeds and the Calder to Wakefield, by the construction of 16 locks. Lock sizes were increased several times, as was the depth of water, to enable larger boats to use the system. The Aire below Haddlesey was bypassed by the opening of the Selby Canal in 1778. A canal from Knottingley to the new docks and new town at Goole provided a much shorter route to the River Ouse from 1826. The New Junction Canal was constructed in 1905, to link the system to the River Don Navigation, by then part of the Sheffield and South Yorkshire Navigation.

<span class="mw-page-title-main">Lock (water navigation)</span> Device for raising and lowering boats or ships

A lock is a device used for raising and lowering boats, ships and other watercraft between stretches of water of different levels on river and canal waterways. The distinguishing feature of a lock is a fixed chamber in which the water level can be varied; whereas in a caisson lock, a boat lift, or on a canal inclined plane, it is the chamber itself that rises and falls.

<span class="mw-page-title-main">Canal du Midi</span> Canal in France

The Canal du Midi is a 240 km (150 mi) long canal in Southern France. Originally named the Canal Royal en Languedoc and renamed by French revolutionaries to Canal du Midi in 1789, the canal is considered one of the greatest construction works of the 17th century.

<span class="mw-page-title-main">River Weaver</span> River in Cheshire, England

The River Weaver is a river, navigable in its lower reaches, running in a curving route anti-clockwise across west Cheshire, northern England. Improvements to the river to make it navigable were authorised in 1720 and the work, which included eleven locks, was completed in 1732. An unusual clause in the enabling Act of Parliament stipulated that profits should be given to the County of Cheshire for the improvement of roads and bridges, but the navigation was not initially profitable, and it was 1775 before the first payments were made. Trade continued to rise, and by 1845, over £500,000 had been given to the county.

<span class="mw-page-title-main">Falkirk Wheel</span> Rotating boat lift in Scotland

The Falkirk Wheel is a rotating boat lift in Tamfourhill, Falkirk, in central Scotland, connecting the Forth and Clyde Canal with the Union Canal. It reconnects the two canals for the first time since the 1930s. It opened in 2002 as part of the Millennium Link project.

<span class="mw-page-title-main">Anderton Boat Lift</span> Two caisson lift lock near Anderton, Cheshire, England

The Anderton Boat Lift is a two-caisson lift lock near the village of Anderton, Cheshire, in North West England. It provides a 50-foot (15.2 m) vertical link between two navigable waterways: the River Weaver and the Trent and Mersey Canal. The structure is designated as a scheduled monument, and is included in the National Heritage List for England; it is also known as one of the Seven Wonders of the Waterways.

<span class="mw-page-title-main">Bingley Five Rise Locks</span> Staircase lock on the Leeds and Liverpool Canal at Bingley

Bingley Five-Rise Locks is a staircase lock on the Leeds and Liverpool Canal at Bingley. As the name implies, a boat passing through the lock is lifted or lowered in five stages.

<span class="mw-page-title-main">Moveable bridge</span> Bridge that moves to allow passage, usually of watercraft

A moveable bridge, or movable bridge, is a bridge that moves to allow passage for boats or barges. In American English, the term is synonymous with drawbridge, and the latter is the common term, but drawbridge can be limited to the narrower, historical definition used in some other forms of English, in which drawbridge refers to only a specific type of moveable bridge often found in castles.

<span class="mw-page-title-main">Peterborough Lift Lock</span> Boat lift

The Peterborough Lift Lock is a boat lift located on the Trent Canal in the city of Peterborough, Ontario, Canada, and is Lock 21 on the Trent-Severn Waterway.

<span class="mw-page-title-main">Fontinettes boat lift</span>

The Fontinettes Boat Lift (French: Ascenseur des Fontinettes or Ascenseur à bateaux des Fontinettes was built in 1888 on the Canal de Neufossé and connected the river Aa and the Neuffossé Canal in Arques, near Saint-Omer in the Pas-de-Calais.

<span class="mw-page-title-main">Panama Canal locks</span> Devices to raise and lower ships as they pass between oceans

The Panama Canal locks are a lock system that lifts ships up 85 feet to the main elevation of the Panama Canal and down again. The original canal had a total of six steps for a ship's passage. The total length of the lock structures, including the approach walls, is over 1.9 miles (3 km). The locks were one of the greatest engineering works ever to be undertaken when they opened in 1914. No other concrete construction of comparable size was undertaken until the Hoover Dam, in the 1930s.

<span class="mw-page-title-main">Caisson lock</span> Type of canal lock

The caisson lock is a type of canal lock in which a narrowboat is floated into a sealed watertight box and raised or lowered between two different canal water levels. It was invented in the late 18th century as a solution to the problem posed by the excessive demand for water when conventional locks were used to raise and lower canal boats through large height differences. Such locks, each of which would only raise and lower boats through small height differences of a few feet, would not suffice when large height differences had to be tackled nor when water was in short supply. The caisson was thought to be one solution, although it transpired that the technology of the day was not capable of achieving this type of construction economically.

<span class="mw-page-title-main">Saint-Louis-Arzviller inclined plane</span>

The Saint-Louis-Arzviller inclined plane is an inclined plane on the Marne-Rhine Canal that enables the canal to cross the Vosges Mountains. It is located in the commune of Saint-Louis, between the towns of Saint-Louis and Arzviller in the département of the Moselle.

<span class="mw-page-title-main">Water slope</span>

A water slope is a type of canal inclined plane built to carry boats from a canal or river at one elevation up or down to a canal or river at another elevation.

<span class="mw-page-title-main">Canal Latéral de la Garonne</span> Canal in France

The Canal de Garonne, formerly known as Canal latéral à la Garonne, is a French canal dating from the mid-19th century that connects Toulouse to Castets-en-Dorthe. The remainder of the route to Bordeaux uses the river Garonne. It is the continuation of the Canal du Midi which connects the Mediterranean with Toulouse.

<span class="mw-page-title-main">Locks on the Canal du Midi</span>

There are 91 working locks on the Canal du Midi along its 240-kilometre (150 mi) course from the Bassin du Thau on the Mediterranean coast to the junction with the Canal lateral a la Garonne in Toulouse. There are a further 13 locks on the 37-kilometre (23 mi) La Nouvelle branch which runs through Narbonne to the Mediterranean at Port-la-Nouvelle. The locks are all under the management of the French navigation authority, Voies navigables de France.

<span class="mw-page-title-main">Jean Aubert (engineer)</span> French engineer

Jean Aubert was a French engineer. In 1961, he used the idea of the German engineer Julius Greve from the last century to describe a pente d'eau, which was a way of moving boats up the gradient of a canal without locks. The design consisted of a sloping channel, through which a wedge of water on which the boat was floating could be pushed up an incline. This concept was used in both the Montech water slope and the Fonserannes water slopes.

<span class="mw-page-title-main">Fonseranes Water Slope</span> Former canal elevator

The Fonseranes Water Slope is a disused inclined plane on the Canal du Midi parallel to the Fonseranes Lock. It has a rise of 13.6 m (45 ft) and a slope of 5°.

References

  1. Rolt, L. T. C. (1973). From Sea to Sea. Ohio University Press. ISBN   9780713904710.
  2. Lance Day; Ian McNeil (1996). Biographical Dictionary of the History of Technology . Taylor & Francis. p.  29. ISBN   9780415060424. Jean Aubert canal.
  3. Ian McNeil (1990). An Encyclopaedia of the history of technology . Taylor & Francis. p.  485. Jean Aubert canal.

43°58′13″N1°13′39″E / 43.97028°N 1.22750°E / 43.97028; 1.22750