| NHI H-3 Kolibrie | |
|---|---|
 Test flying at Zestienhoven in 1958 | |
| General information | |
| Type | Helicopter |
| National origin |  Netherlands |
| Manufacturer | Nederlandse Helikopter Industrie |
| Number built | 11 |
| History | |
| First flight | May 1956 |
The NHI H-3 Kolibrie (Dutch for "Hummingbird") was a small helicopter developed in the Netherlands in the 1950s by Nederlandse Helikopter Industrie. It first flew in May 1956. [1]
The H-3 was a two-seat general purpose helicopter. It had a duraluminium tube superstructure, an open cockpit and landing gear of metal skids. The design is typical of ultralight helicopters of the period, being powered by tip-jets — two ramjets, one at the tip of each rotor blade. The small tail rotor, powered by the motion of the main rotor, was necessary only for yaw control since the tip-jets eliminated the need for an anti-torque force. [2] The ramjets could burn multiple types of fuel, giving the helicopter a certain versatility.
The Kromhout-designed-and-built ramjets generated 0.196 kN (44 lbf) thrust and made a complex gear box unnecessary. Later, Aviolanda-built ramjets generated 0.226 kN (51 lbf) thrust. In order to start the ramjets, a small 1.5 kW (2 hp) auxiliary power unit spun the main rotor to 70 rpm, at which point the ramjets could be ignited.
Variants with skis, flotation devices, and medical evacuation stretchers were developed and tested, but these versions were never produced. After developing a cropduster version, the H-3 was mainly marketed for that purpose.
The H-3 was assembled at Aviolanda. Subassembly took place at Aviolanda which built the fuselage and at Kromhout which built the engines. Fokker, a subcontractor to NHI, built the rotorblades. Final assembly took place at the newly opened Rotterdam Airport.
The initial production run counted ten helicopters of which the first three were used for development, testing and airworthiness tests. The second production run of ten helicopters was to be undertaken by Aviolanda after Kromhout left the joint venture. This second production run was to be equipped with an uprated ramjet. It is unsure whether the improved ramjet was ever produced.
Although the H-3 was considered to be a technical success, it was never successful commercially. Despite its low acquisition price, the project became a failure. Several factors contributed to this. First, the Hiller OH-23 Raven was provided to the Royal Netherlands Air Force by the United States free of charge, under the Mutual Defense Assistance Pact (MDAP). Second, NHI's two most important designers, Jan M. Drees and Gerard F. Verhage, left the company, which never recovered. Third, the ramjets not only required a great deal of development to make them viable for production, but potential buyers regarded them as unsafe. Fourth, the extraordinary fuel consumption of the ramjets made the helicopter uneconomical to operate; flight time and range were quite limited, making the helicopter unattractive for commercial or military use. Finally, the ramjets were incredibly loud: during testing, complaints were filed by people living over 5 kilometres away from the test site.
Overall, nine H-3's were built between 1958 and 1959 by NHI at Rotterdam Airport when Kromhout was still a parent company. After Kromhout left, Aviolanda built another two H-3's at their Papendrecht plant.
The few production models were mainly exported to Israel, Germany, the UK and Dutch New Guinea. A few models stayed in the Netherlands.
Data from Jane's All The World's Aircraft 1961–62, [3] Jane's All the World's Aircraft 1958-59 [4]
General characteristics
Performance
The Fairey Rotodyne was a 1950s British compound gyroplane designed and built by Fairey Aviation and intended for commercial and military uses. A development of the earlier Fairey Jet Gyrodyne, which had established a world helicopter speed record, the Rotodyne featured a tip-jet-powered rotor that burned a mixture of fuel and compressed air bled from two wing-mounted Napier Eland turboprops. The rotor was driven for vertical takeoffs, landings and hovering, as well as low-speed translational flight, but autorotated during cruise flight with all engine power applied to two propellers.
The Hiller YH-32 Hornet is an American ultralight helicopter built by Hiller Aircraft in the early 1950s. It was a small and unique design because it was powered by two Hiller 8RJ2B ramjet engines mounted on the rotor blade tips which weigh 13 lb (5.9 kg) each and deliver an equivalent of 45 hp (34 kW) for a total of 90 hp (67 kW). Versions of the HJ-1 Hornet were built for the United States Army and the United States Navy in the early 1950s.
The Focke-Wulf Triebflügel, or Triebflügeljäger, literally meaning "thrust-wing hunter", was a German concept for an aircraft designed in 1944, during the final phase of World War II, as a defence against the ever-increasing Allied bombing raids on central Germany. It was a vertical take-off and landing tailsitter interceptor design for local defense of important factories or areas which had small or no airfields.
The Boeing X-50A Dragonfly, formerly known as the Canard Rotor/Wing Demonstrator, was a VTOL rotor wing experimental unmanned aerial vehicle that was developed by Boeing and DARPA to demonstrate the principle that a helicopter's rotor could be stopped in flight and act as a fixed wing, enabling it to transition between fixed-wing and rotary-wing flight.
A tip jet is a jet nozzle at the tip of some helicopter rotor blades, used to spin the rotor, much like a Catherine wheel firework. Tip jets replace the normal shaft drive and have the advantage of placing no torque on the airframe, thus not requiring the presence of a tail rotor. Some simple monocopters are composed of nothing but a single blade with a tip rocket.
The Saunders-Roe Skeeter is a two-seat training and scout helicopter that was developed and produced by British manufacturer Saunders-Roe ("Saro") of Cowes and Southampton, in the United Kingdom.
The Fairey Jet Gyrodyne is a British experimental compound gyroplane built by the Fairey Aviation Company that incorporated helicopter, gyrodyne and autogyro characteristics. The Jet Gyrodyne was the subject of a Ministry of Supply (MoS) research contract to gather data for the follow-up design, the Rotodyne.
The Sikorsky S-69 is an American experimental compound helicopter developed by Sikorsky Aircraft as the demonstrator of the co-axial Advancing Blade Concept (ABC) with United States Army and NASA funding.
The Westland Westminster was a British helicopter of the 1950s from Westland Aircraft. A large cargo design, it was powered by two turboshaft engines driving a single, five-bladed rotor. Initially unclad, the all-metal airframe was later enclosed in a fabric covering. Designed and built as a private venture without government assistance, it was cancelled when Westland took over rival helicopter producers and their more advanced projects.
The Napier Eland is a British turboshaft or turboprop gas-turbine engine built by Napier & Son in the early 1950s. Production of the Eland ceased in 1961 when the Napier company was taken over by Rolls-Royce.
The Miles M.100 Student was built as a lightweight trainer as a private venture by F.G. and George Miles with development started in 1953. Although not specifically a Miles product, it was promoted as a British Royal Air Force trainer but failed to enter production.
The Fairey FB-1 Gyrodyne is an experimental British rotorcraft that used single lifting rotor and a tractor propeller mounted on the tip of the starboard stub wing to provide both propulsion and anti-torque reaction.
The Fiat Model 7002 was a 1960s Italian general-purpose helicopter with a tip jet driven rotor built by Fiat Aviazione. Only one aircraft was built.
The Sud-Ouest SO.1221 Djinn is a French two-seat light helicopter designed and manufactured by aircraft manufacturer Sud-Ouest (SNCASO), which was later merged into Sud Aviation. It was the first production French helicopter, as well as being one of the first practical European helicopters to be produced. The Djinn was also the first rotorcraft to harness tip-jet propulsion to enter production, and the first production turbine powered helicopter.
The American Helicopter XH-26 Jet Jeep is an experimental tip jet helicopter developed in 1951 by the American Helicopter Company to meet a United States Army and Air Force (USAF) request for a collapsible and air-droppable observation helicopter.
The Hiller ROE Rotorcycle is a single-seat ultralight helicopter designed in 1953 for a military requirement. A total of 12 were produced for the United States Marine Corps. And in 1954, the Hiller Helicopters was selected by the US Navy's Bureau of Aeronautics to build this design of a one-man, foldable, self-rescue and observation helicopter. It featured a two-blade rotor system. Its original empty weight was 290 lb (132 kg).
The McDonnell XH-20 Little Henry is a 1940s American experimental lightweight helicopter designed and built by McDonnell Aircraft.
The Nederlandse Helikopter Industrie (NHI) was a Dutch helicopter manufacturer.
The Kayaba Heliplane Type-1 was a gyrodyne designed by Shiro Kayaba and prototyped by Kayaba Industry in Japan during the early 1950s.
The Aviolanda AT-21 was a target drone developed in the Netherlands by Aviolanda. Powered by a pulsejet engine, it was the Netherlands' first drone to be successfully developed, and saw limited use in the late 1950s and early 1960s.
