Nanosolar

Last updated
Nanosolar, Inc.
Company type Private
Industry Solar Energy
Founded2002
Founder Martin Roscheisen
Brian Sager
Defunct2013
Headquarters,
Key people
Eugenia Corrales (CEO)
Dave Jackrel
John McAdoo
Becky Baybrook
John Bender
Products Solar panels
RevenueUS$3,100,000 (2007) [1]
Website www.nanosolar.com   OOjs UI icon edit-ltr-progressive.svg

Nanosolar was a developer of solar power technology. Based in San Jose, CA, Nanosolar developed and briefly commercialized a low-cost printable solar cell manufacturing process. The company started selling thin-film CIGS panels mid-December 2007, and planned to sell them at 99 cents per watt, much below the market at the time. However, prices for solar panels made of crystalline silicon declined significantly during the following years, reducing most of Nanosolar's cost advantage. [2] [3] [4] By February 2013 Nanosolar had laid off 75% of its work force. [5] Nanosolar began auctioning off its equipment in August 2013. [6] Co-Founder of Nanosolar Martin Roscheisen stated on his personal blog that nanosolar "ultimately failed commercially." and that he would not enter this industry again because of slow-development cycle, complex production problems and the impact of cheap Chinese solar power production. [7] Nanosolar ultimately produced less than 50 MW of solar power capacity despite having raised more than $400 million in investment. [8]

Contents

Financial backers and manufacturing

Nanosolar was started in 2002 and headquartered in San Jose, California. The company received financing from a number of technology investors including Benchmark Capital, Mohr Davidow Ventures, and Larry Page and Sergey Brin, the founders of Google. Nanosolar received the largest amount in a round of Venture Capital technology funding amongst United States companies during Q2 2006, with 100 million USD of new funding secured. [9] It also received the largest amount of financing of any private company in 2008 (USD 300 million in Q1).

Nanosolar planned to build a large production facility in San Jose, and in Germany at Luckenwalde (Berlin), [10] with an annual capacity of 430 megawatts. Several German energy and venture capital companies have heavily invested in this company as a consequence of the favourable economics for solar energy in Germany due to government subsidies. [11]

On December 12, 2007 the company announced [12] that it had started solar cell production in its San Jose factory, with its German facility slated to go into operation in the 1st quarter of 2008. The company said in 2006 that the San Jose factory, when fully built, would have the capacity to produce 430 megawatts of cells each year. [13]

On December 18, 2007 the company began shipping its first solar panels for a one-megawatt municipal power plant in Germany. [14]

On February 17, 2012 Nanosolar announced they had achieved 115MW capacity, $20 Million in additional funding to further expand manufacturing capacity and a NREL Thin-Film Solar Aperture Efficiency of 17.1%. [15] This capacity was just over one quarter of the 430 megawatts predicted five years previously.

Management

On Jan. 19 2012 former EVP of Engineering & Operations Eugenia Corrales was named CEO following CEO Geoff Tate returning to retirement. Tate had been CEO of Nanosolar since March 22, 2010 having been hired out of retirement as an interim CEO for his experience in leading a company into volume production as CEO of Rambus. [16] Tate replaced co-founder Martin Roscheisen who had been the company's Chairman & CEO for the past eight years; no reason was given for Roscheisen's exit. [17]

On June 25, 2012, nano solar hired 3 new sales & marketing executives: Stephan Hansen, executive vice president of Worldwide Sales; Roy Shaw, head of North America Sales and Stefan Zschiegner, vice president of Worldwide Marketing. Prior to joining Nanosolar, Hansen led the European sales organization of First Solar for more than seven years. Shaw brings over 25 years of sales management experience in the solar industry. He most recently was director of USA Sales at Jinko Solar, a global PV manufacturer, producing crystalline ingots, wafers, cells, and mono- and multi- crystalline PV panels. Prior to Jinko Solar, he was head of Western Sales at Suntech Solar Corp., a global producer of silicon solar modules. Zschiegner most recently was vice president of Global Product Management and Applications at First Solar, where he focused on solutions for emerging markets, balance-of-system and module product management.

On Sep. 11, 2012, Nanosolar appointed Karl Steigele to the position of President & COO. Eugenia Corrales left the company to pursue other ventures. Before joining Nanosolar, Steigele spent more than 30 years in international management and consulting at IBM, where he worked with Fortune 500 global manufacturing companies, including Intel, Hitachi, ABB, Thomson, Siemens, Sony and McKesson, among others.

Technology

The company used thin film technology to manufacture CIGS solar cells, a technology involving a semiconductor material made of copper, indium, gallium and selenium, and achieved an efficiency of up to 19.9% in laboratory samples at the time. [18]

The company's technology gained early industry recognition with the presentation of a Small Times Magazine award at a leading nanotech business event in 2005. [19] Technical details of Nanosolar's manufacturing techniques have been disclosed in patent applications. [20] Some information about their process became available in a Scientific American article (in German). [21] These details involved a semiconductor ink that it claimed would enable it to produce solar cells with a basic printing process, rather than using slow and expensive high-vacuum based thin-film deposition processes. The ink was deposited on a flexible substrate (the “paper”), and then nanocomponents in the ink aligned themselves properly via molecular self-assembly.

Nanosolar's solar cells were verified by NREL to be as efficient as 14.6% in 2006, [21] 15.3% in 2009, [22] and 17.1% in 2011. [23] Efficiencies for then-current production panels were said to be 8-9%, with plans to submit panels with 10-11% efficiency for IEC certification in the fall of 2010. [24]

In September 2009, Nanosolar announced the launch of production at a rate of 640 MW annually; [25] however, ramp-up to volume production after the announcement took an additional six months, [24] limiting actual production in 2009 to an estimated 4 MW, [26] and as of August 2010 the plant was still ramping up toward its announced capacity. [27] Since the hiring of new CEO Geoff Tate, the company declined to discuss its actual manufacturing capacity, [24] [26] but said that its target for 2010 was to ship panels for "several ... megawatt-size projects" and "[build] panels for projects that have been identified that can help build the case for an operating history and bankability in 2011." [24]

Nanosolar developed a suite of in-house capabilities for creating nanostructured components based on various patented and patent-pending techniques. It used nanostructured components as the basis for creating printable semiconductors, printable transparent electrodes, novel forms of advanced nanocomposite solar-cell design and powerful new forms of barrier films. [28]

According to the company at the time, "leveraging recent science advances in nanostructured materials, Nanosolar has developed a proprietary ink that makes it possible to simply print the semiconductor of a high-performance solar cell. This ink was based on Nanosolar developing various proprietary forms of nanoparticles and associated organic dispersion chemistry and processing techniques suitable for delivering a semiconductor of high electronic quality." [29] [30]

Two advantages over earlier technologies were that a printing process is quick and also makes it easy to deposit a uniform layer of the ink, resulting in a layer with the correct ratio of elements everywhere on the substrate. Also, the ink was printed only where needed, so there was less waste of material. Last, the substrate material on which the ink was printed was much more conductive and less expensive than the stainless steel substrates that are often used in thin-film solar panels.

These solar cells successfully blended the needs for efficiency, low cost, and longevity and were designed to be easy to install due to their flexibility and light weight. Estimates by Nanosolar of the cost of these cells fell roughly between 1/10 and 1/5 [31] the industry standard per kilowatt. However, solar module prices fell dramatically since that prediction in 2006. [32]

The company implied that their solar cells would last more than 25 years by saying they "achieve a durability compatible with our 25-year warranty." [33] They also commissioned a study by Black and Veatch that found their 25-year warranty to be compatible with their module design. [24]

See also

Related Research Articles

<span class="mw-page-title-main">Photovoltaics</span> Method to produce electricity from solar radiation

Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially used for electricity generation and as photosensors.

<span class="mw-page-title-main">Solar panel</span> Assembly of photovoltaic cells used to generate electricity

A solar panel is a device that converts sunlight into electricity by using photovoltaic (PV) cells. PV cells are made of materials that produce excited electrons when exposed to light. The electrons flow through a circuit and produce direct current (DC) electricity, which can be used to power various devices or be stored in batteries. Solar panels are also known as solar cell panels, solar electric panels, or PV modules.

Konarka Technologies, Inc. was a solar energy company based in Lowell, Massachusetts, founded in 2001 as a spin-off from University of Massachusetts Lowell. In late May 2012, the company filed for Chapter 7 bankruptcy protection and laid off its approximately 80-member staff. The company’s operations have ceased and a trustee is tasked with liquidating the company’s assets for the benefit of creditors.

<span class="mw-page-title-main">First Solar</span> American solar power company

First Solar, Inc. is an American manufacturer of solar panels, and a provider of utility-scale PV power plants and supporting services that include finance, construction, maintenance and end-of-life panel recycling. First Solar uses rigid thin-film modules for its solar panels, and produces CdTe panels using cadmium telluride (CdTe) as a semiconductor. The company was founded in 1990 by inventor Harold McMaster as Solar Cells, Inc. and the Florida Corporation in 1993 with JD Polk. In 1999 it was purchased by True North Partners, LLC, who rebranded it as First Solar, Inc.

Sharp Solar, a subsidiary of Sharp Electronics, is a solar energy products company owned by Sharp Corporation and based in Osaka, Japan.

HelioVolt Corporation was a privately held solar energy company based in Austin, Texas that suspended operations in 2014. The company manufactured photovoltaic (PV) solar modules using a thin film semiconductor process based on copper indium gallium selenide (CIGS) to produce CIGS solar cells. HelioVolt manufactured these thin film modules for commercial rooftop, utility-scale ground mount, residential, building-integrated photovoltaics (BIPV) and custom installations. The company raised over $230 million in investments, including over $80 million by SK Group.

MiaSolé is an American solar energy company selling copper indium gallium selenide (CIGS) thin-film photovoltaic products. MiaSolé's manufacturing process lays CIGS on a flexible stainless steel substrate. MiaSolé produces all layers of photovoltaic material in a continuous sputtering process.

Global Solar Energy is a US-based manufacturer of CIGS solar cells, a thin-film based photovoltaic technology, with manufacturing operations in Tucson, Arizona, United States, and Berlin, Germany. In 2013, it was bought by Chinese renewable energy company Hanergy.

TEL Solar, formerly Oerlikon Solar, is a manufacturer of production equipment for the manufacturing of thin-film silicon cells, headquartered in Trübbach, Switzerland, near the border to Liechtenstein. The Japanese electronics and semiconductor company Tokyo Electron acquired the company of about 650 employees from OC Oerlikon in November 2012.

<span class="mw-page-title-main">Ascent Solar</span>

Ascent Solar Technologies, Inc. is a publicly traded photovoltaic (PV) company located in Thornton, Colorado. Its primary product is a flexible CIGS solar cell on a plastic substrate.

<span class="mw-page-title-main">Cadmium telluride photovoltaics</span> Type of solar power cell

Cadmium telluride (CdTe) photovoltaics is a photovoltaic (PV) technology based on the use of cadmium telluride in a thin semiconductor layer designed to absorb and convert sunlight into electricity. Cadmium telluride PV is the only thin film technology with lower costs than conventional solar cells made of crystalline silicon in multi-kilowatt systems.

<span class="mw-page-title-main">Thin-film solar cell</span> Type of second-generation solar cell

Thin-film solar cells are made by depositing one or more thin layers of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (µm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 µm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon.

<span class="mw-page-title-main">Growth of photovoltaics</span> Worldwide growth of photovoltaics

Between 1992 and 2023, the worldwide usage of photovoltaics (PV) increased exponentially. During this period, it evolved from a niche market of small-scale applications to a mainstream electricity source. From 2016-2022 it has seen an annual capacity and production growth rate of around 26%- doubling approximately every three years.

<span class="mw-page-title-main">Copper indium gallium selenide solar cell</span>

A copper indium gallium selenide solar cell is a thin-film solar cell used to convert sunlight into electric power. It is manufactured by depositing a thin layer of copper indium gallium selenide solid solution on glass or plastic backing, along with electrodes on the front and back to collect current. Because the material has a high absorption coefficient and strongly absorbs sunlight, a much thinner film is required than of other semiconductor materials.

<span class="mw-page-title-main">Solar Frontier</span>

Solar Frontier Kabushiki Kaisha is a Japanese photovoltaic company that develops and manufactures thin film solar cells using CIGS technology. It is a fully owned subsidiary of Showa Shell Sekiyu and located in Minato, Tokyo, Japan. The company was founded in 2006 as Showa Shell Solar, and renamed Solar Frontier in April 2010.

Siva Power, Inc. is an American solar power company that developed thin-film technology. The company designed and manufactured copper indium gallium deselenide (CIGS) photovoltaics. Siva Power is based in San Jose, California. Bruce Sohn is CEO and Mark Heising is Chairman.

Flisom was a developer and manufacturer of photovoltaic (PV) thin film solar cells located near Zürich, Switzerland, founded in 2005. The company produced high-efficiency CIGS thin film solar modules on flexible plastic foil using proprietary roll-to-roll manufacturing techniques. It went into liquidation in 2023.

The Stion Corporation was a solar company based in the United States with headquarters in San Jose, CA and manufacturing in Hattiesburg, MS. Founded in 2006, Stion developed thin-film solar panels. The company was majority backed by Khosla Ventures. Stion also provided turn-key solar systems for end users of electricity through its vertically integrated development arm, Stion Energy Services. The company ceased operations in 2017 citing foreign competition.

References

  1. Nanosolar, Inc Archived 2008-05-01 at the Wayback Machine Yahoo Finance
  2. Vidal, John (December 29, 2007). "Solar energy 'revolution' brings green power closer". The Guardian. London. Archived from the original on 2013-09-01. Retrieved 2007-12-31.
  3. Markoff, John (2007-12-18). "Nanosolar". New York Times. Archived from the original on 2016-12-01. Retrieved 2007-12-31.
  4. "Nanosolar". ubergizmo. Archived from the original on 2007-12-21. Retrieved 2007-12-31.
  5. "The growing CIGS graveyard: Nanosolar liquidation auction | SiliconBeat". www.siliconbeat.com. Archived from the original on 2013-07-19.
  6. "Get yer cheap next-gen solar tech, courtesy of the Nanosolar auction". 13 August 2013. Archived from the original on 16 September 2013. Retrieved 11 September 2013.
  7. "rmr | The personal blog of R. Martin Roscheisen". blog.rmartinr.com. Archived from the original on 2013-10-03. Retrieved 2023-05-10.
  8. "Nanosolar, Thin-Film Solar Hype Firm, Officially Dead". Archived from the original on 2013-09-22. Retrieved 2013-09-11.
  9. "Venture Capital Funding". Investor's Business Daily. 2006-07-24. Archived from the original on 2007-09-25.
  10. "Nanosolar Selects Manufacturing Sites". Nanosolar. 2006-12-12. Archived from the original on 2007-02-18. Retrieved 2007-02-11.
  11. Hibbard, Justin (2006-06-26). "Bright Days for Nanosolar". Bloomberg. Archived from the original on 2016-11-02. Retrieved 2023-01-02.
  12. "Nanosolar announces start of thin-film production". earth2tech.com. 2007-12-12. Archived from the original on 2012-07-08. Retrieved 2007-12-13.
  13. "Nanosolar to Build in San Jose". www.redherring.com. Archived from the original on 2007-12-23.
  14. "Nanosolar Ships First Panels, 2007-12-18". Archived from the original on January 16, 2008.
  15. http://www.nanosolar.com/company/blog#194Nanosolar Blog Archived 2012-04-08 at the Wayback Machine
  16. "Nanosolar names new CEO". Reuters. 2012-01-19. Archived from the original on 2021-05-18. Retrieved 2023-05-10.
  17. Semiconductor Veteran Geoff Tate Named CEO of Nanosolar, Inc. Archived 2010-03-31 at the Wayback Machine from Nanosolar Blog
  18. I. Repins, M. A. Contreras, B. Egaas, C. DeHart, J. Scharf, C. L. Perkins, B. To, and R. Noufi, 19.9%-efficient ZnO/CdS/CuInGaSe$_2$ solar cell with 81.2% fill factor. Progress in Photovoltaics: Research and Applications, 16(3):235–239, February 2008
  19. "Small Times Magazine announces Best of Small Tech Awards at leading nanotech business event". Small Times Magazine. 2005-02-11.
  20. Nano-architected/assembled solar electricity cell Archived 2017-12-01 at the Wayback Machine US Patent 6,852,920, Nanosolar Inc., February 8, 2005
  21. 1 2 "Printing Solar Cells (in German)" (PDF). Bild der Wissenschaft (Scientific American). 2007-01-10. Archived from the original (PDF) on 2007-09-27.
  22. "NREL Certifies 15.3% Nanosolar Foil Efficiency". 2009-09-09. Archived from the original on 2010-06-20. Retrieved 2010-07-06.
  23. "Nanosolar Achieves 17.1% Aperture Efficiency Through Printed CIGS Process". 2011-10-05. Archived from the original on 2011-10-13. Retrieved 2011-12-15.
  24. 1 2 3 4 5 Tom Cheyney (August 3, 2010). "Exclusive: Nanosolar rising, Part I—One-time thin-film PV lightning rod gets its focus on". PV-Tech.org. Archived from the original on August 6, 2010.
  25. Nanosolar Completes Panel Factory, Commences Serial Production Archived 2011-01-04 at the Wayback Machine from Nanosolar Blog
  26. 1 2 "Who will deliver on the promise of the leading thin-film recipe for converting sunlight into electricity?". Photon International. July 2010. pp. 134–143.
  27. Tom Cheyney (August 6, 2010). "Exclusive: Nanosolar rising, Part II—The 'I' in CIGS also stands for thin-film PV innovation". PV-Tech.org. Archived from the original on August 14, 2010.
  28. Nanocomponents Archived 2008-01-19 at the Wayback Machine from Nanosolar website
  29. Nanoparticle Ink Archived 2008-01-19 at the Wayback Machine from Nanosolar website
  30. Coated nanoparticles and quantum dots for solution-based fabrication of photovoltaic cells Archived 2017-08-05 at the Wayback Machine US Patent 7,306,823, Nanosolar Inc., December 11, 2007
  31. "Manufacturing Plans". San Jose Mercury News . 2006-06-21. Archived from the original on 2006-07-16. Retrieved 2006-08-05.
  32. "Retail Price Summary". solarbuzz.com. 2012-03-01. Archived from the original on 2012-06-27. Retrieved 2012-06-07.
  33. Designed To Last Archived 2007-11-19 at the Wayback Machine from Nanosolar website