Neander (motorcycle)

Last updated
1929 Neander motorcycle Neumann-neander-1929.jpg
1929 Neander motorcycle

The Neander motorcycle was designed by Ernst Neumann, who made his name first as a painter and graphic artist, and later turned to motorcycle and car design, going into production in 1928 under the Neander name, and changing his own name to Ernst Neumann-Neander, a doubling of the German and Greek words for 'new man'.

Neumann-Neander designed and built a series of unusual prototype and racing motorcycles with lightweight pressed-aluminum beam frames from which the motors hung, and unique pivoting forks that used a spring box near the steering head. In 1926 he founded Neander Motorfahrzeug GmbH in Düren and went into production, using a pressed-steel frame that was cadmium plated instead of his aluminum prototypes. These novel frames housed a variety of motors, from small 122cc Villiers two-strokes to 350cc and 500cc single-cylinder engines by Küchen, to large v-twins by J.A.P. and Motosacoche. The Neander motorcycle had futuristic styling, with a curved, padded leather seat behind an egg-shaped fuel tank, and very clean lines. With excellent handling from the pressed-steel frame, Neanders won quite a few races, and have a very comfortable, stable, and predictable ride. [1] Neander also designed a sleek, torpedo-shaped sidecar to accompany his motorcycles. [2]

In 1929 the Opel automobile factory licensed the Neander design, and built the Opel Motoclub in 1929 and 1930 only. Fritz von Opel famously attached a series of rockets to an Opel Motoclub in 1930 as a publicity stunt. There was also a briefly licensed Neander sold under the E-O (Elite-Opel) name in 1931.

It’s estimated around 2000 Neander motorcycles were built, before Neumann-Neander turned his attention to a series of experimental 'Fahrmaschinen' small cars with motorcycle engines (1934–39), motorcycles with differential wheel sizes (1937–40), and a few final experiments in 1947-49 with two, three, and four-wheelers. [3]

Prototype of the Neander diesel motorcycle Neander1400td.jpg
Prototype of the Neander diesel motorcycle

More recently, the Neander name has been applied to a diesel-powered motorcycle, produced in Germany by Neander AG.

Related Research Articles

<span class="mw-page-title-main">Opel</span> German automotive brand, subsidiary of Stellantis

Opel Automobile GmbH, usually shortened to Opel, is a German automobile manufacturer which has been a subsidiary of Stellantis since 16 January 2021. It was owned by the American automaker General Motors from 1929 until 2017 and the PSA Group, a predecessor of Stellantis, from 2017 until 2021. Most of the Opel lineup is marketed under the Vauxhall Motors brand in the United Kingdom since the 1980s. Some Opel vehicles were badge-engineered in Australia under the Holden brand until 2020, in North America and China under the Buick, Saturn, and Cadillac brands, and in South America under the Chevrolet brand.

<span class="mw-page-title-main">Monocoque</span> Structural design that supports loads through an objects external skin

Monocoque, also called structural skin, is a structural system in which loads are supported by an object's external skin, in a manner similar to an egg shell. The word monocoque is a French term for "single shell".

<span class="mw-page-title-main">KTM</span> Austrian motorcycle and sports car manufacturer

KTM AG is an Austrian motorcycle, bicycle and sports car manufacturer owned by Pierer Mobility AG and the Indian manufacturer Bajaj Auto. It was formed in 1992 but traces its foundation to as early as 1934. Today, KTM AG is the parent company of the KTM Group, consisting of a number of motorcycle brands.

<span class="mw-page-title-main">Norton Motorcycle Company</span> British motorcycle manufacturer

The Norton Motorcycle Company is a brand of motorcycles headquartered in Solihull, West Midlands,, England. For some years around 1990, the rights to use the name on motorcycles was owned by North American financiers.

<span class="mw-page-title-main">NSU Motorenwerke</span> German manufacturer (1873–1967/1977)

NSU Motorenwerke AG, or NSU, was a German manufacturer of automobiles, motorcycles and pedal cycles, founded in 1873. Acquired by Volkswagen Group in 1969, VW merged NSU with Auto Union, creating Audi NSU Auto Union AG, ultimately Audi. The name NSU originated as an abbreviation of "Neckarsulm", the city where NSU was located.

<span class="mw-page-title-main">Chevrolet Vega</span> Subcompact automobile

The Chevrolet Vega is a subcompact automobile that was manufactured and marketed by GM's Chevrolet subdivision from 1970 to 1977. Available in two-door hatchback, notchback, wagon, and sedan delivery body styles, all models were powered by an inline four-cylinder engine with a lightweight, aluminum alloy cylinder block. The Vega first went on sale in Chevrolet dealerships on September 10, 1970. Variants included the Cosworth Vega, a short-lived limited-production performance model, introduced in the spring of 1975.

<span class="mw-page-title-main">Softail</span> Type of motorcycle

A softail motorcycle intentionally looks like vintage motorcycles with a rigid hard-tail frame that has a triangle of steel tubes at the rear axle, as on a bicycle frame, but on a Softail these tubes are actually a triangular swingarm, with the shock absorber(s) hidden, as opposed to clearly visible regular twin shocks on both sides of the rear wheel on standard bikes. Since the introduction of the Harley-Davidson FXST Softail in 1983 as a registered trademark of the Motor Company, softail has become a genericized trademark for other models of cruiser motorcycles with rear suspensions hidden for retro style reasons. This was done even though the rear wheel was often hidden behind bags or exhaust pipes.

<span class="mw-page-title-main">Vincent Motorcycles</span> British motorcycle manufacturer

Vincent Motorcycles was a British manufacturer of motorcycles from 1928 to 1955. The business was established by Philip Vincent who bought an existing manufacturing name HRD, initially renaming it as Vincent HRD, producing his own motorcycles as HRD did previously with engines purchased as complete assemblies from other companies. From 1934, two new engines were developed as single cylinder in 500 cc and v-twin 1,000 cc capacities. Production grew from 1936, with the most-famous models being developed from the original designs after the War period in the late 1940s.

<span class="mw-page-title-main">Motorized bicycle</span> Bicycle with an attached motor or engine and transmission

A motorized bicycle is a bicycle with an attached motor or engine and transmission used either to power the vehicle unassisted, or to assist with pedalling. Since it sometimes retains both pedals and a discrete connected drive for rider-powered propulsion, the motorized bicycle is in technical terms a true bicycle, albeit a power-assisted one. Typically they are incapable of speeds above 52 km/h (32 mph), however in recent years larger motors have been built, allowing bikes to reach speeds of upwards of 72 km/h.

<span class="mw-page-title-main">Solex (manufacturer)</span>

Solex is a brand name owned by a subsidiary of Italian automotive parts manufacturer, Magneti Marelli. The original Solex company was French-owned and produced carburetors and gasoline powered bicycles.

<span class="mw-page-title-main">Yamaha FZR1000</span> Motorcycle model produced by Yamaha

The Yamaha FZR1000 is a motorcycle produced by Yamaha from 1987 to 1995. Classed as a sports motorcycle.

<span class="mw-page-title-main">BMW R32</span> Type of motorcycle

The BMW R32 was the first motorcycle produced by BMW under the BMW name. An aircraft engine manufacturer during World War I, BMW was forced to diversify after the Treaty of Versailles banned the German air force and German aircraft manufacture. BMW initially turned to industrial engine design and manufacturing.

<span class="mw-page-title-main">Yamaha WR450F</span> Type of motorcycle

The Yamaha WR450F is an off-road motorcycle made by Yamaha Motor Company. It currently has a 450 cc (27 cu in) liquid-cooled single-cylinder engine. First offered in 1998 at 400cc, it shared many components and design concepts with the YZ400F motocross model. It is basically the racing YZ450F detuned slightly for more controllable power, with a headlight and lighting coil, softer suspension, a kickstand, lower noise specifications, larger radiators and lower emissions. The WR in the name indicates a wide-ratio gear box common to most enduro or trail bikes and stands in contrast to the close-ratio gearbox essential to a motocross racer. Over the years the WR has benefited from the advances made in the YZ motocross version gaining displacement and advancements such as an aluminum frame and improved suspension. Over much of its life the weight of the WR450F has remained fairly constant ranging from 244 to 249 pounds dry weight.

<span class="mw-page-title-main">Motorcycle frame</span> Frame of a motorcycle

A motorcycle frame is a motorcycle's core structure. It supports the engine, provides a location for the steering and rear suspension, and supports the rider and any passenger or luggage. Also attached to the frame are the fuel tank and battery. At the front of the frame is found the steering head tube that holds the pivoting front fork, while at the rear there is a pivot point for the swingarm suspension motion. Some motorcycles include the engine as a load-bearing stressed member; while some other bikes do not use a single frame, but instead have a front and a rear subframe attached to the engine.

<span class="mw-page-title-main">Vehicle frame</span> Main supporting structure of a motor vehicle

A vehicle frame, also historically known as its chassis, is the main supporting structure of a motor vehicle to which all other components are attached, comparable to the skeleton of an organism.

<span class="mw-page-title-main">Fuldamobil</span> Motor vehicle

Fuldamobil is the name of a series of small cars produced by Elektromaschinenbau Fulda GmbH of Fulda, Germany, and Nordwestdeutscher Fahrzeugbau (NWF) of Wilhelmshaven between 1950 and 1969. Various designated versions of the car were produced, although the vehicles produced under each designation were not always identical and the designations were sometimes misapplied. Though overall numbers produced were relatively small, the cars attracted sufficient attention to see licensed construction on four continents including Europe. In its ultimate configuration it is said to have inspired the term "bubble car". It is acknowledged as the first car in the world to feature a negative scrub radius, now recognised as a major advance in driving safety.

<span class="mw-page-title-main">Ascot-Pullin Motorcycles</span> Historical motorcycle manufacturer

Ascot-Pullin Motorcycles was a British motorcycle manufacturer founded by Cyril Pullin as the Ascot Motor & Manufacturing Co Ltd. at Letchworth, Hertfordshire in 1928. An inventor and winner of the 1914 Isle of Man TT, Pullin had been developing ideas for motorcycle designs since 1920 with Stanley Groom, and had patented a two-stroke engine motorcycle with pressed sheet metal frame and forks. After leaving Douglas the first time, Pullin worked with Groom again to refine his ideas and develop and patent the Ascot-Pullin motorcycle. Fewer than 500 were built and sales were poor, resulting in the company's liquidation in 1930.

<span class="mw-page-title-main">Brough Superior Austin Four</span> Type of motorcycle

The Brough Superior Austin Four was a limited-production motorcycle designed and manufactured by Brough Superior of Nottingham, UK in 1932. It was listed in the 1932 Brough Superior catalogue as the 'Straight Four' but it was commonly known as the Brough Superior Austin Four, or BS4, or '3-wheeled Brough'. The machine is unique in its design, being powered by a modified Austin 7 automobile engine and gearbox unit, from which a driveshaft emerges on the centre-line of the motor. Rather than design a new gearbox, George Brough had the inspiration to keep the central driveshaft, and use a pair of close-couple rear wheels driven by a central final drive box. This 3-wheeled design was legally considered a motorcycle as the wheel centres were within 24". The Brough Superior-Austin Four created a sensation when revealed at the 1931 Olympia Motorcycle Show.

<span class="mw-page-title-main">Stelio Belletti</span>

Stelio Belletti is an Italian craftsman and entrepreneur and specialized in bicycle frame construction. He founded the brand Stelbel in 1973.

<span class="mw-page-title-main">BMW R 11</span> BMW Touring Motorcycle, produced 1930–1934

The BMW R 11 was the first touring motorcycle in the 750cc class manufactured by the German Motorcycle with a pressed-steel frame in duplex form, in the vein of the Neander motorcycle of Ernst Neumann-Neander.

References

  1. "The Vintagent Original: Neander | the Vintagent". 26 July 2017.
  2. 'Ernst Neumann-Neander und seine Motorrädder', Trapp, 1996, HEEl AG, Schindellegi Schweiz. ISBN   3-89365-546-8
  3. 'Neander: Ernst Neumann-Neander und seine Fahrmaschinen', Trapp, 2002, HEEl AG, Schindellegi Schweiz. ISBN   3-89880-041-5