New Britain Machine Company

Last updated
New Britain Machine Company
New Britain machine.jpg
Product typeHand tools
Country United States of America
Introduced1887 (or 1895)
Discontinued1990
Previous ownersLitton Industries

New Britain Machine Company was a tool company that was headquartered in New Britain, Connecticut. The company started to sell sockets and drive tools. New Britain was the main supplier for NAPA tools until its closure in 1990. New Britain Machine owned Husky and Blackhawk tools as well as making its own economy-grade tools under the None Better and Mustang names. [1] New Britain Machine was then acquired by the Litton Tool Company on December 22, 1972.

Contents

History

According to one source, New Britain Machine was founded in New Britain, Connecticut in 1887. [1] However, according to Archives & Special Collections at the Thomas J. Dodd Research Center, it was founded in 1895 subsequent to the J.T. Case Engine Company, a manufacturer of steam engines. [2] The first product the new company produced was a chainsaw mortising machine. [2] In 1917, it registered the None Better trademark to sell its line of sockets and tools. Much of New Britain Machine's early tool production was done under the None Better line. Many of the early tools were carbon steel, offering a lower cost alternative to the higher price alloy steels of the day. Early tool sets consisted of hex drive sockets and an ell bar for the drive tool. Beginning in the 1930s, the None Better line consisted of a wide variety of 1/2 square drive tools with a Cadmium finish. At this time, New Britain Machine was also supplying tools for Sears in their Craftsman line of tools. These tools are easy to distinguish as they either have a BE or an H in a circle stamped into the tools. The New Britain Machine line was also created at this time as a higher priced alloy steel alternative. [1]

Acquisitions and development

The early 1930s were a busy time for New Britain Machine Company. At the beginning of the decade, New Britain purchased the Husky Wrench Company, which was started by Sigmund Mandl in 1924. Sigmund Mandl went on to Blackhawk Manufacturing Company in 1931 after the Husky Wrench Company was bought by Olsen Manufacturing. During this time, New Britain Machine had a contract with Sears to supply sockets and drive tools for their Craftsman tool line. This contract survived until 1947 when the socket was gradually phased out and replaced by the "V" series sockets. In 1925 the National Automotive Parts Association was formed and New Britain Machine became the main supplier for them until the late 1970s.

In 1955, New Britain bought the hand tool line of Blackhawk Manufacturing Company, which retained its line of hydraulic jacks and other hydraulic products and changed its name to Applied Power Industries. Blackhawk tools became a very important brand for the New Britain Machine Company for many years. Many of the designs that Blackhawk made were adopted by New Britain in their tools. New Britain Machine Company also supplied many companies, this list includes Mac Tools, Matco Tools, Giller, J. C. Penney (Penncraft), Owatonna Tools Company, American Forge, and PowerKraft.

In 1957, Luther Kilness filed patent numbers 2,554,990 [3] and 2,981,389 [4] with the United States Patent Office. This design can be said to be the next evolution of the ratchet design of SK Hand Tools' Theodore Rueb. [1] This ratchet was a very successful design, lasting from its introduction in 1961 to the eventual closure of New Britain in the 1980s. The ratchet was a compression engagement, using 12 teeth with a 60 tooth ratchet count. Later ratchets, from 1971 and onward, used a 9 tooth pawl making the ratchet a 45 tooth count.

In 1972, New Britain Machine Company was acquired by Litton Industrial Products. Litton continued to be the owner of New Britain Machine Company until the latter's closure in 1990. [2] Its assets (including the Blackhawk and Husky trademarks) were acquired by The Stanley Works which continues to use the Blackhawk name for one of its product lines. On July 8, 2004, New Britain Mayor Timothy Stewart announced that twenty-six acres of New Britain Machine's former property on South Street was being sold to two local businesses, Dattco and Guida's, after reaching an agreement. [5]

Related Research Articles

<span class="mw-page-title-main">Screwdriver</span> Hand tool used for turning screws

A screwdriver is a tool, manual or powered, used for turning screws.

A torque wrench is a tool used to apply a specific torque to a fastener such as a nut, bolt, or lag screw. It is usually in the form of a socket wrench with an indicating scale, or an internal mechanism which will indicate when a specified (adjustable) torque value has been reached during application.

Craftsman is a line of tools, lawn and garden equipment, and work wear. Originally a house brand established by Sears, the brand is now owned by Stanley Black & Decker.

<span class="mw-page-title-main">Socket wrench</span> Lever with interchangeable socket heads to grip or turn a bolt or nut

A socket wrench is a type of spanner that uses a closed socket format, rather than a typical open wrench/spanner to turn a fastener, typically in the form of a nut or bolt.

<span class="mw-page-title-main">Snap-on</span> American tool manufacturer

Snap-on Incorporated is an American designer, manufacturer and marketer of high-end tools and equipment for professional use in the transportation industry including the automotive, heavy duty, equipment, marine, aviation, and railroad industries. Headquartered in Kenosha, Wisconsin, Snap-on also distributes lower-end tools under the brand name Blue-Point. Their primary competitors include Matco, Mac Tools, and Cornwell Tools.

<span class="mw-page-title-main">Impact wrench</span> Socket wrench power tool

An impact wrench is a socket wrench power tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft. It was invented by Robert H. Pott of Evansville, Indiana.

<span class="mw-page-title-main">DeWalt</span> American professional tools manufacturer

The DeWalt Industrial Tool Company is an American worldwide manufacturer of power tools and hand tools for the construction, manufacturing and woodworking industries, as well as home craftspeople. DeWalt is a registered trademark of Black & Decker (U.S.) Inc., a subsidiary of Stanley Black & Decker.

A breaker bar is a long non-ratcheting bar that is used with socket wrench-style sockets. They are used to break loose very tight fasteners because their additional length allows the same amount of force to generate significantly more torque than a standard length socket wrench. Their use prevents damage to the ratcheting mechanism of a socket wrench. Often, after the first half turn, the fastener is loose enough to be turned with a socket wrench.

<span class="mw-page-title-main">SK Hand Tools</span> American tool manufacturer

SK Hand Tools was an American tool company located in Sycamore, Illinois but sold out to Hangzhou GreatStar Industrial, a Chinese tool company. Major products of the once fully-USA-manufacturing company include sockets and drive tools, wrenches, air tools, and other mechanics' tools. The company has a tool line of over 3,500 items including wrenches, ratchets, screwdrivers, tool boxes and air tools. It has manufacturing facilities in China, Taiwan, Colorado Springs, Colorado and Sycamore, Illinois. Outlets for their products include independent tool-truck dealers, auto parts stores, and major internet vendors such as Sears and Amazon.com.

Husky is a line of hand tools, pneumatic tools, and tool storage products. Though founded in 1924, it is now best known as the house brand of The Home Depot, where it is exclusively sold. Its hand tools are manufactured for Home Depot by Western Forge, Apex Tool Group, and Iron Bridge Tools. Its slogan is "The toughest name in tools." Home Depot also carries a higher end line of tools marked Husky Pro.

Channellock is an American company that produces hand tools. It is best known for its pliers—the company manufactures more than 75 types and sizes of pliers—particularly its eponymous style of tongue-and-groove, slip-joint pliers. Its pliers have distinctive sky-blue handle grips; the company has been using the same trademarked shade of blue since 1956.

<span class="mw-page-title-main">Proto (tools)</span>

Proto Tools is an American industrial hand tool company. Founded as Plomb, it is presently a division of Stanley Black & Decker. The company is credited with creating the first combination wrench in 1933.

Armstrong Tools was an American industrial hand tool manufacturer. In its final years, it existed as a brand of Apex Tool Group, LLC and manufactured the majority of its tools in the United States, focusing mostly on aerospace, government, and military users.

Blackhawk is an American brand of hand tools. It is currently a sub-brand of the Proto division of the Stanley Black & Decker.

Western Forge was an American manufacturing company. The company manufactured hand tools that were sold under other brands, including private-label brands such as Craftsman and Husky. It was a subsidiary of Ideal Industries.

The North Brothers Manufacturing Company was an American manufacturer based in Philadelphia, Pennsylvania that specialized in the making of hand tools, small appliances and some specialized power tools. They were family owned and operated for over 60 years before being acquired by the Stanley Works in 1946. They are probably most well known for their line of tools, particularly the "Yankee" brand of ratcheting screwdrivers.

Easco Hand Tools was an American manufacturer of hand tools. It is best known for being the main supplier of mechanic's tools for the Craftsman brand. Its tools were also sold under the Allen and KD Tools brands after its acquisition by Danaher Corporation. The brand name was gradually phased out by Danaher.

Sigmund S. Mandl (1898-1976) was the founder of the Husky Wrench manufacturing company. His brother Hugo was born in Úsov.

<span class="mw-page-title-main">Hex key</span> Driver for hexagonal socketed bolts or screws

A hex key is a simple driver for bolts or screws that have heads with internal hexagonal recesses (sockets).

References

  1. 1 2 3 4 "The New Britain Machine Company". Home.comcast.net. Archived from the original on 2009-11-09. Retrieved 2012-07-08.
  2. 1 2 3 "New Britain Machine Company Records". Doddcenter.uconn.edu. Archived from the original on 2012-05-25. Retrieved 2012-07-08.
  3. ↑ "Ratchet mechanism – Kilness, Luther E". Freepatentsonline.com. 1951-05-29. Retrieved 2012-07-08.
  4. ↑ "Ratchet mechanism – NEW BRITAIN MACHINE CO". Freepatentsonline.com. 1961-04-25. Retrieved 2012-07-08.
  5. ↑ What's New in New Britain, Connecticut Archived March 12, 2010, at the Wayback Machine
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.