Pitbull II | |
---|---|
Role | Autogyro |
National origin | United States |
Manufacturer | North American Rotorwerks |
Status | Production suspended (2013) |
Variants | North American Rotorwerks Pitbull Ultralight |
The North American Rotorwerks Pitbull II is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended. [1] [2]
The Pitbull II is a two-seat development of the North American Rotorwerks Pitbull Ultralight. It was designed to comply with the US Experimental - Amateur-built rules. It features a single main rotor, a two-seats in side-by-side configuration open cockpit with a windshield, conventional landing gear and a four-cylinder, air and liquid-cooled, four-stroke, dual-ignition 100 hp (75 kW) Rotax 912S engine in tractor configuration. The 110 hp (82 kW) Subaru EA-81 and Subaru EA-82 auto-conversion powerplants are optional. [1] [2]
The aircraft's rotor has a 30 ft (9.1 m) diameter and the cockpit has a 40 in (102 cm) width. The tailplane is strut-braced and an electric pre-rotator is standard. A small baggage compartment with a capacity of 20 lb (9.1 kg) and a volume of 2 cu ft (56.6 l) is fitted. The recommended power range is 90 to 160 hp (67 to 119 kW). With its empty weight of 440 lb (200 kg) and a gross weight of 1,025 lb (465 kg), the useful load is 585 lb (265 kg). Construction time from the factory assembly kit is estimated at 100 hours. [1]
The aircraft is intended to resemble the autogyros of the 1930s and as such it uses a radial engine-style round cowling, rounded rudder, barrel-shaped fuselage and other antique styling details. [1] [2]
Data from Bayerl and North American Rotorwerks [1] [2]
General characteristics
Performance
The AutoGyro Calidus is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Rotor Flight Dynamics Dominator is an American autogyro designed by Ernie Boyette of Rotor Flight Dynamics of Wimauma, Florida, and made available in the form of plans and kits for amateur construction.
The Sport Copter Lightning is an American autogyro, designed and produced by Sport Copter of Scappoose, Oregon. The aircraft is supplied as a kit for amateur construction.
The Celier Kiss is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Jaktorów-Kolonia, Poland. When it was available the aircraft was supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Celier Xenon 2 is a series of Polish autogyros that was designed by Frenchman Raphael Celier and produced by his company, Celier Aviation of Piotrków Trybunalski, Poland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Foxcon Terrier 200 is an Australian light-sport aircraft, designed and produced by Foxcon Aviation of Mackay, Queensland. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Autogyro Cavalon is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. It was introduced at the 2011 Aero show in Friedrichshafen. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Air Command Tandem is an American autogyro designed and produced by Air Command International of Caddo Mills, Texas. The aircraft is supplied as a kit for amateur construction or as a ready-to-fly aircraft.
The Air Copter A3C is a French autogyro, designed and produced by Air Copter of Lherm, Haute-Garonne. The aircraft is supplied as a kit for amateur construction.
The Airbet Girabet is a family of Spanish autogyros, designed and produced by Airbet of Barcelona. They are all supplied as complete ready-to-fly-aircraft.
The AutoGyro MT-03 is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Bauer BAD-12 Gyrotrainer is a Czech autogyro, designed and produced by Bauer Avion of Prague. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Chayair Sycamore is a South African autogyro, designed and produced by Chayair of Musina. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The ELA 07 is a series of Spanish autogyros, designed and produced by ELA Aviación of Córdoba, Andalusia. The aircraft are supplied complete and ready to fly.
The Magni M-14 Scout is an Italian autogyro, designed and produced by Magni Gyro srl of Besnate. The aircraft is supplied as a complete ready-to-fly-aircraft.
The North American Rotorwerks Pitbull Ultralight is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.
The Pagotto Brakogyro is a series of Italian autogyros, designed by Enio Pagotto and produced by Carpenterie Pagotto of Pianzano. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Trixy G 4-2 R is an Austrian autogyro, designed and produced by Trixy Aviation Products of Dornbirn. The aircraft was introduced at the Aero show held in Friedrichshafen in 2011 and when it was available it was supplied as a complete ready-to-fly-aircraft.
The Dynali H2S is a Belgian helicopter, designed by Jacky Tonet and produced by Dynali of the Thines district of Nivelles. When it was available the aircraft was supplied as a kit for amateur construction or fully assembled, supplied ready-to-fly.
The Apollo Gyro AG1 is a Hungarian autogyro produced by Apollo Ultralight Aircraft, of Eger and introduced in 2012. The aircraft is supplied ready-to-fly.