Ovation Breadwinner

Last updated
Ovation Breadwinner
Ovation Breadwinner.jpg
The Ovation Breadwinner
(Solid body electric guitar, mahogany)
Manufacturer Ovation Guitar Company
Construction
Body typeSolid
Woods
Body Mahogany
Hardware
Pickup(s) S-S or H-H

The Breadwinner was a solid body electric guitar made by the Ovation Guitar Company. It is one of the few solid body electrics they ever made and it was the first mass-produced American guitar to have active electronics. [1] It has an unusual ergonomic body made of mahogany and shaped something like an axe guitar. Although that is not the only reason for the body shape, the designer also considered balance and ergonomics. [2] The guitar has either two toroidal single-pole pickups (early models) or two mini-humbucker pickups, volume and tone knobs, a three way pickup selector and a phase switch.

There were three distinct models based upon the Breadwinner's exotic shape - the Breadwinner, the Deacon, and the Breadwinner Limited.[ citation needed ] The main difference between the Breadwinner and the Breadwinner Limited was an odd additional cutaway in the upper body and a "Tuxedo" gray to black finish. The difference between the Breadwinner and the Deacon was in the finish and hardware used. The Breadwinners were coated in Kaman Industries' "LyraChord" material and were available in a number of colors including Blue, White, Black, Tan, Gray, and Red while the Deacon was available in either Natural Sunburst, Clear Mahogany, or a clear Red finish - all three were glossy. The Deacon also had Mother of Pearl diamond-shaped inlays and an ivory binding around the fretboard.

Early models were equipped with Ovation's toroidal single pole pickups while later models were equipped with humbuckers. Most collectors and players prefer the sound of the original toroidal pickups.[ citation needed ]

Regardless of the model, the guitar was one of the first to come equipped with an active FET preamp on board.[ citation needed ] The active electronics allowed guitarists to get a very wide range of sounds out of the guitar. In fact, Ovation published a guide to sounds where they listed various band and song "signature" sounds and the settings to use to achieve those sounds with the guitar's electronics.

Peter Tosh of The Wailers used a Breadwinner during the band's 1973 "Burnin'" Tour, and can be seen/heard with it in the 1973 "Capitol Sessions" video, as well as on the album "Talkin Blues". Björn Ulvaeus of ABBA used a white version of the Breadwinner on their 1977 tour through Europe and Australia. Colin Newman of the band Wire also uses a white Breadwinner, particularly in the early days of Wire. Marc Bolan of glam rock group T.Rex can be seen playing a tuxedo black Breadwinner on the group's appearance on Top Of The Pops for their "The Groover" single in 1973. On the original back cover of the 1980 album Panorama by The Cars, keyboardist Greg Hawkes can be seen holding a black version of the Breadwinner. In the early 80's, Robert Smith of The Cure used a black version whilst filling in as guitarist for Siouxsie and the Banshees, he can be seen playing it in the Nocturne live footage. Tom Morello of Rage Against the Machine uses a Breadwinner in the song "Ashes in the Fall". Dave Gregory of XTC also occasionally played a Breadwinner. [3]

Related Research Articles

<span class="mw-page-title-main">Gibson SG</span> Solid body electric guitar model

The Gibson SG is a solid-body electric guitar model introduced by Gibson in 1961. It remains in production today in many variations of the initial design. The SG Standard is Gibson's best-selling model of all time. SG stands for "solid guitar".

<span class="mw-page-title-main">Gibson Les Paul</span> Solid body electric guitar

The Gibson Les Paul is a solid body electric guitar that was first sold by the Gibson Guitar Corporation in 1952. The guitar was designed by factory manager John Huis and his team with input from and endorsement by guitarist Les Paul. Its typical design features a solid mahogany body with a carved maple top and a single cutaway, a mahogany set-in neck with a rosewood fretboard, two pickups with independent volume and tone controls, and a stoptail bridge, although variants exist.

<span class="mw-page-title-main">Gibson ES-335</span> Semi hollow body electric guitar

The Gibson ES-335 is a semi-hollow body semi-acoustic guitar introduced by the Gibson Guitar Corporation as part of its ES series in 1958. It features a solid maple wood block running through the center of its body with upper bouts that are hollow and two violin-style f-holes cut into the top over the hollow chambers. Since its release, Gibson has released numerous variations of and other models based on the design of the ES-335.

<span class="mw-page-title-main">Fender Precision Bass</span> Model of electric bass

The Fender Precision Bass is a model of electric bass guitar manufactured by Fender Musical Instruments Corporation. In its standard, post-1957 configuration, the Precision Bass is a solid body, four-stringed instrument usually equipped with a single split-coil humbucking pickup and a one-piece, 20-fret maple neck with rosewood or maple fingerboard.

The Ovation Guitar Company is a manufacturer of string instruments. Ovation primarily manufactures steel-string acoustic guitars and nylon-string guitars, often with pickups for electric amplification. In 2015, it became a subsidiary of Drum Workshop after being acquired from KMCMusicorp.

<span class="mw-page-title-main">P-90</span> Guitar pickup

The P-90 is a single coil electric guitar pickup produced by Gibson Guitar Corporation since 1946, as well as other vendors. Compared to other single coil designs, such as the ubiquitous Fender single coil, the bobbin for a P-90 is wider but shorter. The Fender style single coil is wound in a taller bobbin, but the wires are closer to the individual poles. This makes the P-90 produce a different type of tone, somewhat warmer with less edge and brightness. As with other single-coil pickups, the P-90 is subject to mains hum unless some form of hum cancellation is used.

<span class="mw-page-title-main">Gibson Thunderbird</span> Electric bass guitar

The Gibson Thunderbird is an electric bass guitar made by Gibson and Epiphone.

The Gibson Les Paul Junior is a solid-body electric guitar introduced in 1954 as an affordable, entry-level Les Paul. It was first released with a single-cutaway body style; models with a double-cutaway body style were later introduced in 1958. The Junior continued through the first three years of the Les Paul/SG body redesign. The initial run was discontinued in 1963.

<span class="mw-page-title-main">Gibson Les Paul Studio</span>

The Gibson Les Paul Studio is a solid body electric guitar produced by the Gibson Guitar Corporation since 1983. It is a model of Les Paul with some features omitted to appeal to musicians looking for the tonal qualities of the guitar but with less of an emphasis on cosmetics and to reduce the price of the instrument.

The Gibson Les Paul bass is a bass guitar first manufactured by Gibson in 1969, just after the relaunch of the Les Paul guitar in 1968.

The Gibson Les Paul Custom is a higher-end variation of the Gibson Les Paul guitar. It was developed in 1953 after Gibson had introduced the Les Paul model in 1952.

<span class="mw-page-title-main">Gibson Nighthawk</span>

The Gibson Nighthawk was a family of electric guitars manufactured by Gibson. Introduced in 1993, the Nighthawk represented a radical change from traditional Gibson designs. While its maple-capped mahogany body and set neck were reminiscent of the classic Gibson Les Paul, the Nighthawk incorporated a number of characteristics more commonly associated with Fender guitars. The Nighthawk was not a commercial success; production of all models was discontinued in 1998 after only five years.

<span class="mw-page-title-main">Duesenberg Guitars</span>

Duesenberg is a brand for electric string instruments founded in 1986 and located in Hannover, Germany. The headquarter is in Hannover, Germany, they are known for using a Plek machine for the levelling of frets and setup. The actual place for production of guitar bodies and necks have never been revealed by Duesenberg e.g. by showing a factory Tour video.

<span class="mw-page-title-main">Gibson ES-333</span>

The Gibson ES-333 is a semi hollow body electric guitar made by Gibson Guitar Corporation.

<span class="mw-page-title-main">Parker Fly</span>

The Parker Fly was a model of electric guitar built by Parker Guitars. It was designed by Ken Parker and Larry Fishman, and first produced in 1993. The Fly is unique among electric guitars in the way it uses composite materials. It is notable for its light weight and resonance. It was also one of the first electric guitars to combine traditional magnetic pickups with piezoelectric pickups, allowing the guitarist to access both acoustic and electric tones. Production ended in 2016 and the company has not released a new model of any kind since.

<span class="mw-page-title-main">Ovation Deacon</span>

During the 1970s Ovation Guitar Company created a more "deluxe" version of their exotically shaped solid body electric guitar - the Ovation Breadwinner that was called the Deacon.

The Fender Telecaster, colloquially known as the Tele, is an electric guitar produced by Fender. Together with its sister model the Esquire, it was the world's first mass-produced, commercially successful solid-body electric guitar. Its simple yet effective design and revolutionary sound broke ground and set trends in electric guitar manufacturing and popular music.

The Ibanez Musician Bass was a line of electric bass guitars produced by the Ibanez Corporation from 1979 until 1987.

<span class="mw-page-title-main">Jim Root Telecaster</span>

The Fender Jim Root Telecaster is a signature model of the Fender Telecaster electric guitar customized for American musician Jim Root. In January 2010, a Jim Root Signature Fender Telecaster was unveiled on the Fender website, similar to the one he has been seen using on stage, as of March 2009. The difference being the headstock. The prototype originally made for Jim came with the 1970s style Stratocaster headstock, which Root had shaved down to a standard Telecaster shape. This made the 1970s Fender Telecaster logo go to the very edge of the headstock. With a mahogany body, a fast neck and active EMG 81/60 pickups, it is a guitar designed for the heavy metal/hard rock guitar player.

References

  1. André Millard, ed. (2004). The Electric Guitar: A History of an American Icon. JHU. p. 172. ISBN   9780801878626.
  2. "Interview with Mike, the designer of the breadwinner". Breadwinnner Fan Page.
  3. "Home". guitargonauts.info.