Paratrek Angel 2-B

Last updated

Angel 2-B
Role Powered parachute
National origin United States
Manufacturer Paratrek
StatusProduction completed

The Paratrek Angel 2-B is an American powered parachute that was designed and produced by Paratrek of Auburn, California. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction. [1]

Contents

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles trainer exemption as well as the US Experimental - Amateur-built aircraft rules. It features a 525 sq ft (48.8 m2) parachute-style wing, two-seats-in-tandem or side-by-side configuration, tricycle landing gear and a single 50 hp (37 kW) Rotax 503 engine in pusher configuration. The 65 hp (48 kW) Hirth 2706 engine was a factory option. [1]

The aircraft carriage is built from a combination of bolted aluminium and 4130 steel tubing. In flight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The main landing gear incorporates sprung steel rod suspension. The aircraft has a typical empty weight of 254 lb (115 kg) and a gross weight of 754 lb (342 kg), giving a useful load of 500 lb (230 kg). With full fuel of 10 U.S. gallons (38 L; 8.3 imp gal) the payload for the pilot, passenger and baggage is 440 lb (200 kg). [1]

The standard day, sea level, no wind, take off with a 50 hp (37 kW) engine is 100 ft (30 m) and the landing roll is 50 ft (15 m). [1]

The manufacturer estimated the construction time from the supplied assembly kit as 20 hours. [1]

Operational history

By 1998 the company reported that six kits had been sold and two aircraft were completed and flying. [1]

In April 2015 one example was registered in the United States with the Federal Aviation Administration. [2]

Specifications (Angel 2-B)

Data from Purdy [1]

General characteristics

Performance

Related Research Articles

The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Mountaineer Trikes Mite-Lite is a family of American flying wing ultralight trikes that was designed and produced by Mountaineer Trikes. The aircraft were supplied as a kit for amateur construction.

Buckeye Eagle American powered parachute

The Buckeye Eagle is an American powered parachute that was designed and produced by Buckeye Industries of Argos, Indiana.

The Buckeye Dream Machine is an American powered parachute that was designed and produced by Buckeye Industries, introduced in 1985. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft, as a kit, in the form of plans for amateur construction.

The Heldeberg Spirit 103, also called the Blue Heron Spirit 103, is an American powered parachute, designed and produced by Heldeberg Designs of Altamont, New York.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

The Air Creation Twin is a French ultralight trike that was designed and produced by Air Creation of Aubenas. Production has been completed, but while the aircraft was available it was supplied as an assembly kit for amateur construction or as a complete ready-to-fly-aircraft.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

Freedom Lite SS-11 Skywatch Canadian ultralight aircraft

The Freedom Lite SS-11 Skywatch is a Canadian ultralight aircraft that was produced by Freedom Lite of Walton, Ontario and later by Legend Lite of New Hamburg, Ontario, introduced in 1996. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft, or as a kit for amateur construction.

Letov ST-4 Aztek

The Letov ST-4 Aztek is a Czech microlight aircraft that was designed and produced by Letov Kbely of Prague - Letňany, in the 1990s. When it was available, the aircraft was supplied as a complete ready-to-fly aircraft, or as a kit for amateur construction.

The Star-Lite Warp 1-A is an American homebuilt aircraft that was designed and produced by Star-Lite Engineering of Englewood, Ohio, introduced in 1996. When it was available the aircraft was supplied as a kit for amateur construction.

The Air Command Commander Sport is an American autogyro that was designed and produced by Air Command International of Wylie, Texas. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Paraplane PSE-2 Osprey is an American powered parachute that was designed and produced by Paraplane International of Medford, New Jersey. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Paraplane WD-1 Wind Dancer is an American powered parachute that was designed and produced by Paraplane International of Medford, New Jersey. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Parascender Para-Ag is an American powered parachute agricultural aircraft that was designed and produced by Parascender Technologies of Kissimmee, Florida. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Parascender I, originally just called the Parascender, is an American single-seat powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida and introduced in 1989. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Parascender II is an American powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Six Chuter Skye Ryder Aerochute is an American powered parachute that was designed and produced by Six Chuter of Yakima, Washington. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Sundog One-Seater is a Canadian powered parachute that was designed and produced by Sundog Powerchutes of Sparwood, British Columbia and later Pierceland, Saskatchewan. Now out of production, when it was available the aircraft was supplied as a complete ready-to-fly-aircraft.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 341. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. ↑ Federal Aviation Administration (April 9, 2015). "Make / Model Inquiry Results" . Retrieved April 9, 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.