| Warrior | |
|---|---|
 | |
| The Pawnee Warrior prototype in flight | |
| Role | Helicopter |
| National origin | United States |
| Manufacturer | Pawnee Aviation |
| Status | Production completed |
| Number built | Probably just one prototype |
| Variants | Pawnee Chief |
The Pawnee Warrior was an American helicopter that was designed and produced by Pawnee Aviation of Longmont, Colorado. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction. [1]
The Warrior was designed to comply with the US Experimental - Amateur-built aircraft rules. It featured a single 21 ft (6.4 m) diameter two-bladed main rotor, a two-bladed tail rotor, both made from single metal extrusions. The kit's drive components were intended to be supplied complete and ready to install. The aircraft had a single-seat open cockpit without a windshield and skid-type landing gear. A cockpit enclosure was optional. The standard engine used was a twin cylinder, air-cooled, two-stroke, dual-ignition 65 hp (48 kW) Hirth 2706 powerplant. [1]
The aircraft fuselage was made from steel and aluminum tubing and supplied in three major bolt-together sub-assemblies. It had an empty weight of 437 lb (198 kg) and a gross weight of 850 lb (386 kg), giving a useful load of 413 lb (187 kg). With full fuel of 14 U.S. gallons (53 L; 12 imp gal) the payload for the pilot and baggage was 329 lb (149 kg). [1]
The manufacturer estimated the construction time from the planned assembly kit as 80 hours. [1]
The company said "the Warrior was used [as] a proof of concept platform to develop new models" and was followed by the two place Pawnee Chief. [2]
By 1998 the company reported that one aircraft had been completed and was flying. [1]
By April 2015 no examples were registered in the United States with the Federal Aviation Administration and it is likely that no examples exist any more. [3]
Data from Purdy [1]
General characteristics
Performance
The Howland H-2 Honey Bee is an American homebuilt aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-2 first flew in 1986.
The Phoenix Skyblazer is an American helicopter that was designed by the Nolan brothers and produced by Phoenix Rotorcraft of Fallston, Maryland and more recently Louisburg, North Carolina. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft.
The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.
The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.
The Air Command Commander Sport is an American autogyro that was designed and produced by Air Command International of Wylie, Texas. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Amax Double Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria in the late 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Amax Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Amax Eagle is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the early 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The American Sportscopter Ultrasport 331 is an American helicopter that was designed and produced by American Sportscopter of Newport News, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The American Sportscopter Ultrasport 496 is an American helicopter that was designed and produced by American Sportscopter of Newport News, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Eagle's Perch was an American helicopter that was designed by the Nolan brothers and produced by Eagle's Perch Inc. of Carrollton, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Vortech Skylark is an American helicopter produced by Vortech of Fallston, Maryland. The aircraft is supplied in the form of plans for amateur construction. Vortech also supplies rotor blades for the design.
The Vortech Shadow is an American autogyro that was designed by Tyler Flight, Inc. and produced by Vortech of Fallston, Maryland. The aircraft is supplied as a kit and also in the form of plans for amateur construction. Vortech also supplies rotor blades for the design.
The Hillberg EH1-01 RotorMouse is an American helicopter that was designed by Donald Gene Hillberg and produced by Hillberg Helicopters of Fountain Valley, California, first flying in 1993. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Midwest Zodiac Talon-Turbine is an American helicopter that was designed and produced by Midwest Engineering & Design of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans are no longer advertised for sale.
The Pawnee Chief is an American helicopter that was designed and produced by Pawnee Aviation of Longmont, Colorado and later McCook, Nebraska. It was first flown in December 2005. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Showers Skytwister Choppy is an American helicopter that was produced by Showers-Aero of Milton, Pennsylvania, introduced in 1992. Now out of production, when it was available the aircraft was supplied in the form of CAD plans for amateur construction.
The Paraplane GE-2 Golden Eagle is an American powered parachute that was designed and produced by Paraplane International of Medford, New Jersey. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Paratrek Angel 2-B is an American powered parachute that was designed and produced by Paratrek of Auburn, California. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Specter Aircraft Specter II was an American homebuilt aircraft that was designed and produced by Specter Aircraft of Bancroft, Idaho, introduced in 1997. When it was available the aircraft was supplied as a kit for amateur construction.