Photoalignment

Last updated

Photoalignment is a technique for orienting liquid crystals to desired alignment by exposure to polarized light and a photo reactive alignment chemical. [1] It is usually performed by exposing the alignment chemical ('command surface') to polarized light with desired orientation which then aligns the liquid crystal cells or domains to the exposed orientation. The advantages of photoalignment technique over conventional methods are non-contact high quality alignment, reversible alignment and micro-patterning of liquid crystal phases.

Contents

History

Photoalignment was first demonstrated in 1988 by K. Ichimura on Quartz substrates with an azobenzene compound acting as the command surface. [2] Shortly after publication of Ichimura’s results, the groups from the USA (Gibbons et al. [3] ), Russia/Switzerland (Schadt et al. [4] and Ukraine (Dyadyusha et al. [5] [6] ) almost simultaneously demonstrated LC photoalignment in an azimuthal plane of the aligning substrate. The latter results have been particularly important because they provided a real alternative to the rubbing technology. [7] [8] Since then several chemical combinations have been demonstrated for photoalignment and applied in production of liquid crystal devices like modern displays. [1] [9]

Advantages

Traditionally, liquid crystals are aligned by rubbing electrodes on polymer covered glass substrates. Rubbing techniques are widely used in mass production of liquid crystal displays and small laboratories as well. Due to the mechanical contact during rubbing, often debris are formed resulting in impurities and damaged products. Also, static charge is generated by rubbing which can damage sensitive and increasingly miniature electronics in displays. [10]

Many of these problems can be addressed by photoalignment.

Related Research Articles

<span class="mw-page-title-main">Liquid-crystal display</span> Display that uses the light-modulating properties of liquid crystals

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly but instead use a backlight or reflector to produce images in color or monochrome. LCDs are available to display arbitrary images or fixed images with low information content, which can be displayed or hidden. For instance: preset words, digits, and seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

<span class="mw-page-title-main">Liquid crystal</span> State of matter with properties of both conventional liquids and crystals

Liquid crystal (LC) is a state of matter whose properties are between those of conventional liquids and those of solid crystals. For example, a liquid crystal may flow like a liquid, but its molecules may be oriented in a crystal-like way. There are many types of LC phases, which can be distinguished by their optical properties. The contrasting textures arise due to molecules within one area of material ("domain") being oriented in the same direction but different areas having different orientations. LC materials may not always be in a LC state of matter.

A Polaroid synthetic plastic sheet is a brand name product trademarked and produced by the Polaroid Corporation used as a polarizer or polarizing filter. The term “Polaroid” entered the common vocabulary with the early 1960s introduction of patented film and cameras manufactured by the corporation that produced “instant photos”.

<span class="mw-page-title-main">Azobenzene</span> Two phenyl rings linked by a N═N double bond

Azobenzene is a photoswitchable chemical compound composed of two phenyl rings linked by a N=N double bond. It is the simplest example of an aryl azo compound. The term 'azobenzene' or simply 'azo' is often used to refer to a wide class of similar compounds. These azo compounds are considered as derivatives of diazene (diimide), and are sometimes referred to as 'diazenes'. The diazenes absorb light strongly and are common dyes.

In chemistry, photoisomerization is a form of isomerization induced by photoexcitation. Both reversible and irreversible photoisomerizations are known for photoswitchable compounds. The term "photoisomerization" usually, however, refers to a reversible process.

A biaxial nematic is a spatially homogeneous liquid crystal with three distinct optical axes. This is to be contrasted to a simple nematic, which has a single preferred axis, around which the system is rotationally symmetric. The symmetry group of a biaxial nematic is i.e. that of a rectangular right parallelepiped, having 3 orthogonal axes and three orthogonal mirror planes. In a frame co-aligned with optical axes the second rank order parameter tensor of a biaxial nematic has the form

Liquid crystal polymers (LCPs) are polymers with the property of liquid crystal, usually containing aromatic rings as mesogens. Despite uncrosslinked LCPs, polymeric materials like liquid crystal elastomers (LCEs) and liquid crystal networks (LCNs) can exhibit liquid crystallinity as well. They are both crosslinked LCPs but have different cross link density. They are widely used in the digital display market. In addition, LCPs have unique properties like thermal actuation, anisotropic swelling, and soft elasticity. Therefore, they can be good actuators and sensors. One of the most famous and classical applications for LCPs is Kevlar, a strong but light fiber with wide applications, notably bulletproof vests.  

Optical axis gratings (OAGs) are gratings of optical axis of a birefringent material. In OAGs, the birefringence of the material is constant, while the direction of optical axis is periodically modulated in a fixed direction. In this way they are different from the regular phase gratings, in which the refractive index is modulated and the direction of the optical axis is constant.

<span class="mw-page-title-main">Twisted nematic field effect</span> Type of thin-film-transistor liquid-crystal display technology

The twisted nematic effect (TN-effect) was a main technology breakthrough that made LCDs practical. Unlike earlier displays, TN-cells did not require a current to flow for operation and used low operating voltages suitable for use with batteries. The introduction of TN-effect displays led to their rapid expansion in the display field, quickly pushing out other common technologies like monolithic LEDs and CRTs for most electronics. By the 1990s, TN-effect LCDs were largely universal in portable electronics, although since then, many applications of LCDs adopted alternatives to the TN-effect such as in-plane switching (IPS) or vertical alignment (VA).

<span class="mw-page-title-main">Martin Schadt</span> Swiss physicist and inventor (born 1938)

Martin Schadt is a Swiss physicist and inventor.

A blue phase mode LCD is a liquid crystal display (LCD) technology that uses highly twisted cholesteric phases in a blue phase. It was first proposed in 2007 to obtain a better display of moving images with, for example, frame rates of 100–120 Hz to improve the temporal response of LCDs. This operational mode for LCDs also does not require anisotropic alignment layers and thus theoretically simplifies the LCD manufacturing process.

There are various classifications of the electro-optical modes of liquid crystal displays (LCDs).

Electrically operated display devices have developed from electromechanical systems for display of text, up to all-electronic devices capable of full-motion 3D color graphic displays. Electromagnetic devices, using a solenoid coil to control a visible flag or flap, were the earliest type, and were used for text displays such as stock market prices and arrival/departure display times. The cathode ray tube was the workhorse of text and video display technology for several decades until being displaced by plasma, liquid crystal (LCD), and solid-state devices such as thin-film transistors (TFTs), LEDs and OLEDs. With the advent of metal–oxide–semiconductor field-effect transistors (MOSFETs), integrated circuit (IC) chips, microprocessors, and microelectronic devices, many more individual picture elements ("pixels") could be incorporated into one display device, allowing graphic displays and video.

<span class="mw-page-title-main">Nematicon</span>

In optics, a nematicon is a spatial soliton in nematic liquid crystals (NLC). The name was invented in 2003 by G. Assanto. and used thereafter Nematicons are generated by a special type of optical nonlinearity present in NLC: the light induced reorientation of the molecular director. This nonlinearity arises from the fact that the molecular director tends to align along the electric field of light. Nematicons are easy to generate because the NLC dielectric medium exhibits the following properties:

IPS is a screen technology for liquid-crystal displays (LCDs). In IPS, a layer of liquid crystals is sandwiched between two glass surfaces. The liquid crystal molecules are aligned parallel to those surfaces in predetermined directions (in-plane). The molecules are reoriented by an applied electric field, whilst remaining essentially parallel to the surfaces to produce an image. It was designed to solve the strong viewing angle dependence and low-quality color reproduction of the twisted nematic field effect (TN) matrix LCDs prevalent in the late 1980s.

A liquid-crystal laser is a laser that uses a liquid crystal as the resonator cavity, allowing selection of emission wavelength and polarization from the active laser medium. The lasing medium is usually a dye doped into the liquid crystal. Liquid-crystal lasers are comparable in size to diode lasers, but provide the continuous wide spectrum tunability of dye lasers while maintaining a large coherence area. The tuning range is typically several tens of nanometers. Self-organization at micrometer scales reduces manufacturing complexity compared to using layered photonic metamaterials. Operation may be either in continuous wave mode or in pulsed mode.

<span class="mw-page-title-main">Guest Host Displays</span>

Guest Host Displays, Dichroic Displays, Polymer Dispersed Displays

Polymerization-induced phase separation (PIPS) is the occurrence of phase separation in a multicomponent mixture induced by the polymerization of one or more components. The increase in molecular weight of the reactive component renders one or more components to be mutually immiscible in one another, resulting in spontaneous phase segregation.

Liquid crystal elastomers (LCEs) are slightly crosslinked liquid crystalline polymer networks. These materials combine the entropy elasticity of an elastomer with the self-organization of the liquid crystalline phase. In liquid crystalline elastomers, the mesogens can either be part of the polymer chain or are attached via an alkyl spacer.

<span class="mw-page-title-main">Yuriy Reznikov</span> Ukrainian physicist

Yuriy Reznikov was a Ukrainian physicist, Head of the Department of Crystals at NASU Institute of Physics and a world-renown expert in the field of liquid crystals. He is known for his work on photoalignment, "giant" optical non-linearity of liquid crystals and nano-colloids.

References

  1. 1 2 3 Yaroshchuk, Oleg; Reznikov, Yuriy (2012). "Photoalignment of liquid crystals: basics and current trends". J. Mater. Chem. 22 (2): 286–300. doi:10.1039/c1jm13485j. ISSN   0959-9428.
  2. ↑ Ichimura, Kunihiro; Suzuki, Yasuzo; Seki, Takahiro; Hosoki, Akira; Aoki, Koso (September 1988). "Reversible change in alignment mode of nematic liquid crystals regulated photochemically by command surfaces modified with an azobenzene monolayer". Langmuir. 4 (5): 1214–1216. doi:10.1021/la00083a030. ISSN   0743-7463.
  3. ↑ Gibbons, Wayne M.; Shannon, Paul J.; Sun, Shao-Tang; Swetlin, Brian J. (1991). "Surface-mediated alignment of nematic liquid crystals with polarized laser light". Nature. 351 (6321): 49–50. doi:10.1038/351049a0. ISSN   1476-4687. S2CID   4267126.
  4. ↑ Schadt, Martin; Schmitt, Klaus; Kozinkov, Vladimir; Chigrinov, Vladimir (1992-07-01). "Surface-Induced Parallel Alignment of Liquid Crystals by Linearly Polymerized Photopolymers". Japanese Journal of Applied Physics. 31 (7R): 2155. doi:10.1143/JJAP.31.2155. ISSN   1347-4065. S2CID   123181249.
  5. ↑ Dyadyusha, A.G., Kozenkov, V.M., Marusiy, T.Y., Reznikov, Y.A., Reshetnyak, V.Y. and Khizhnyak, A.I., 1991. Light-induced planar alignment of nematic liquid-crystal by the anisotropic surface without mechanical texture. Ukrainskii Fizicheskii Zhurnal, 36(7), pp.1059-1062.
  6. ↑ Dyadyusha, A. G.; Marusii, T. Ya.; Reznikov, Yu. A.; Khizhnyak, A. I.; Reshetnyak, V. Yu. (1992-07-01). "Orientational effect due to a change in the anisotropy of the interaction between a liquid crystal and a bounding surface". Soviet Journal of Experimental and Theoretical Physics Letters. 56: 17. Bibcode:1992JETPL..56...17D. ISSN   0021-3640.
  7. ↑ EP 0525478,Chigrinov, Vladimir Grigorievich; Kozenkov, Vladimir Marcovich& Novoseletsky, Nicolic Vasilievichet al.,"Liquid crystal display cell",published 1993-02-03, assigned to Hoffmann La Roche and Niopic Moscow Research & Production Association
  8. ↑ US 5389698,Chigrinov, Vladimir Grigorievich; Kozenkov, Vladimir Marcovich& Novoseletsky, Nicolic Vasilievichet al.,"Process for making photopolymers having varying molecular orientation using light to orient and polymerize",published 1995-02-14, assigned to Hoffmann La Roche and Niopic Moscow Research & Production Association
  9. ↑ Murata, Mitsuhiro; Yokoyama, Ryoichi; Tanaka, Yoshiki; Hosokawa, Toshihiko; Ogura, Kenji; Yanagihara, Yasuhiro; Kusafuka, Kaoru; Matsumoto, Takuya (May 2018). "81-1: High Transmittance and High Contrast LCD for 3D Head-Up Displays". SID Symposium Digest of Technical Papers. 49 (1): 1088–1091. doi:10.1002/sdtp.12126. ISSN   0097-966X.
  10. ↑ Seki, Takahiro (2014-08-13). "New strategies and implications for the photoalignment of liquid crystalline polymers". Polymer Journal. 46 (11): 751–768. doi: 10.1038/pj.2014.68 . ISSN   0032-3896.
  11. ↑ Chigrinov, Vladimir G.; Kozenkov, Vladimir M.; Kwok, Hoi-Sing (2008-06-06). Photoalignment of Liquid Crystalline Materials. Wiley-SID Series in Display Technology. Chichester, UK: John Wiley & Sons, Ltd. doi:10.1002/9780470751800. ISBN   978-0-470-75180-0.
  12. ↑ Pan, Su; Ho, Jacob Y.; Chigrinov, Vladimir G.; Kwok, Hoi Sing (2018-02-14). "Novel Photoalignment Method Based on Low-Molecular-Weight Azobenzene Dyes and Its Application for High-Dichroic-Ratio Polarizers". ACS Applied Materials & Interfaces. 10 (10): 9032–9037. doi:10.1021/acsami.8b00104. ISSN   1944-8244. PMID   29442496.
  13. ↑ Ji, Wei; Wei, Bing-Yan; Chen, Peng; Hu, Wei; Lu, Yan-Qing (2017-02-11). "Optical field control via liquid crystal photoalignment". Molecular Crystals and Liquid Crystals. 644 (1): 3–11. doi:10.1080/15421406.2016.1277314. ISSN   1542-1406. S2CID   100118998.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.