| Pitcairn PA-22 | |
|---|---|
 | |
| The PA-22 demonstrating over Washington, 8 November 1934 | |
| Role | Experimental, direct control autogyro |
| National origin | United States |
| Manufacturer | Autogiro Company of America |
| First flight | April 1933 |
| Number built | 1 |
The 1933 experimental Pitcairn PA-22 was one of the first wingless autogyros. It was controlled by movement of the rotor plane rather than the usual control surfaces, though initially the much modified lone example retained rudders as a precaution.
The first autogyros, while relying on the rotor for lift, were controlled in flight with ailerons, elevators and rudders like conventional fixed wing aircraft. The first United States autogyro to dispense with these was the PA-22, which the pilot manoeuvred by altering the rotor plane with a long hanging stick which reached down into the cabin; such designs were termed direct control autogyros. Direct control meant the aircraft could be controlled at the lowest speed at which sufficient lift was available, rather than the higher speeds required for control surface authority. First flown in April 1933, it was first demonstrated in public in Washington, D.C., on 8 November 1934. [1]
The PA-22 had a three-bladed rotor with a diameter of 32 ft (9.8 m), pylon-mounted over the cockpit. It was connected via a clutch to the nose-mounted, 85 hp (63 kW) Pobjoy Cataract engine to spin it up, with rotor blades latched at a low angle of incidence, then unlatched for take-off. Uncowled for cooling and driving a two-bladed propeller, the Cataract powered the PA-22 conventionally once autorotation was established, in standard autogyro fashion. [1] [2]
Behind the engine the fuselage of the PA-22 was conventional, with two side-by-side seats in a flat-sided cabin with generous glazing including windows for both upward and downward views. Access was via side doors. Its tail included a constant chord tailplane, mounted above the fuselage, which carried twin fins inboard of its rounded tips. In the early stages of this much-modified airframe, the fins carried rudders as a precaution but experience of direct control allowed their removal. [1]
The PA-22 had a split axle, fixed tailwheel undercarriage. Its design was similar to that of many fixed wing and autogyro aircraft, with the axles and their rearward drag struts mounted on the central fuselage underside. Long shock-absorbing legs were attached to the upper fuselage. The front wheels were further forward than on other aircraft, making the fraction of weight on the tailwheel greater than usual. Because there was no wing lift involved, it was not necessary to lift the tail during take-off. All three tyres were pneumatic and the tailwheel was steerable. [1]
Another unusual feature of the PA-22 was its foldable rotor. Like other autogyros, the rotor blades were hinged to the drive shaft in the plane of the rotor. In flight, each blade's movement was limited to a few degrees by a pin but these could be removed and the blades folded back manually on the ground. With no wings, hangar space was minimized. [1]
The compact footprint when folded encouraged hopes for a roadable version. This emerged as the Autogiro AC-35, aerodynamically similar and with a foldable rotor but with a centrally-positioned engine. This drove a tractor propeller in flight via a long drive shaft and the tailwheel on the ground through another shaft. [3] It did not reach production and most of Pitcairn's later aircraft had wings, [1] though the PA-36 [2] was an exception. Kellett Autogiro Company's slightly later wingless Kellett KD-1 autogyro [1] had more commercial success. [4]
Data from [1]
General characteristics
Performance
An autogyro, or gyroplane, is a type of rotorcraft that uses an unpowered rotor in free autorotation to develop lift. While similar to a helicopter rotor in appearance, the autogyro's unpowered rotor disc must have air flowing upward across it to make it rotate.
The Focke-Wulf Fw 61 is often considered the first practical, functional helicopter, first flown in 1936. It was also known as the Fa 61, as Focke began a new company—Focke-Achgelis—in 1937.
The CarterCopter is an experimental compound autogyro developed by Carter Aviation Technologies in the United States to demonstrate slowed rotor technology. On 17 June 2005, the CarterCopter became the first rotorcraft to achieve mu-1 (μ=1), an equal ratio of airspeed to rotor tip speed, but crashed on the next flight and has been inoperable since. It is being replaced by the Carter Personal Air Vehicle.
A gyrodyne is a type of VTOL aircraft with a helicopter rotor-like system that is driven by its engine for takeoff and landing only, and includes one or more conventional propeller or jet engines to provide forward thrust during cruising flight. During forward flight the rotor is unpowered and free-spinning, like an autogyro, and lift is provided by a combination of the rotor and conventional wings. The gyrodyne is one of a number of similar concepts which attempt to combine helicopter-like low-speed performance with conventional fixed-wing high-speeds, including tiltrotors and tiltwings.
The Fairey Jet Gyrodyne is a British experimental compound gyroplane built by the Fairey Aviation Company that incorporated helicopter, gyrodyne and autogyro characteristics. The Jet Gyrodyne was the subject of a Ministry of Supply (MoS) research contract to gather data for the follow-up design, the Rotodyne.
The Pitcairn OP-1 was the first rotary-wing aircraft to be seriously evaluated by any of the world's major air forces. The machine was not a helicopter, nor an airplane, but an autogyro. Pitcairn's model was never put into production for any military.
The Fairey FB-1 Gyrodyne is an experimental British rotorcraft that used single lifting rotor and a tractor propeller mounted on the tip of the starboard stub wing to provide both propulsion and anti-torque reaction.
The Kellett KD-1 was a 1930s American autogyro built by the Kellett Autogiro Company. It had the distinction of being the first practical rotary-wing aircraft used by the United States Army and inaugurated the first scheduled air-mail service using a rotary-wing aircraft.
The Kellett K-2 was a two-seat autogyro developed in the United States in the early 1930s. Later examples were designated K-3 and K-4 when equipped with more powerful engines. K-3 NC 12691 is seen in the 1934 movie, It Happened One Night.
The Pitcairn PA-34 and Pitcairn PA-33, given the United States Navy (USN) designation Pitcairn OP-2 and United States Army designation Pitcairn YG-2 respectively were reconnaissance autogyros designed and built in 1936 for evaluation.
The Pitcairn PAA-1 was an autogyro developed in the United States in the early 1930s. Of similar configuration to Pitcairn's earlier machines, the PAA-1 had an airplane-like fuselage with two open cockpits in tandem and a tractor-mounted engine in the nose. It was also equipped with small wings, which carried control surfaces, rather than using the rotor for flight control. It was a smaller and lighter machine than its predecessors and was designed specifically with private pilots in mind.
The Pitcairn PA-19 was a four-seat autogyro developed in the United States in the early 1930s. While most of Pitcairn's autogyro designs featured open cockpits in tandem, the PA-19 had a fully enclosed cabin. It also had wings that carried control surfaces. The rotor provided lift only, but could be tilted in flight to trim the aircraft. Four examples were built before the effects of the Great Depression forced Pitcairn to abandon autogyro production in 1934.
The Pitcairn PCA-2 was an autogyro developed in the United States in the early 1930s. It was Harold F. Pitcairn's first autogyro design to be sold in quantity. It had a conventional design for its day – an airplane-like fuselage with two open cockpits in tandem, and an engine mounted tractor-fashion in the nose. The lift by the four-blade main rotor was augmented by stubby, low-set monoplane wings that also carried the control surfaces. The wingtips featured considerable dihedral that acted as winglets for added stability.
The Avian 2/180 Gyroplane was a two-seat, single-engine autogyro built in Canada in the 1960s. Several prototypes were built but production was not achieved.
The Autogiro Company of America AC-35 was an early attempt to make a roadable aircraft in the United States during the 1930s. Although it was successfully tested, it did not enter production; a 1960s attempt to revive the aircraft in a non-roadable version also failed to achieve success.
The Hafner A.R.III Gyroplane was a British 1930s experimental autogyro designed by Austrian Raoul Hafner, and built by the A.R.III Construction Company at Denham, Buckinghamshire.
The CSIR SARA II is a South African two-seat experimental autogyro designed and built by the Aeronautics Research Unit of the Council for Scientific and Industrial Research.
The Westland CL.20 was a two-seat autogyro designed and built by Westland Aircraft between 1934 and 1938. One flying prototype and six airframes were built, which had control problems and insufficient lift. Before these problems could be solved the programme was abandoned and the prototype was scrapped in 1938.
The Swanson-Fahlin SF-1 was a high wing, two seat cabin aircraft with a small radial engine, designed in the United States and first flown in 1934. Only one was built.
The Wilford Gyroplane was based on a German autogyro first flown in 1926. After E. Burke Wilford bought the rights and patents, it was developed in the US until 1936.