Pontianak-class sloop

Last updated
HNLMS Pontianak (1874-1898).jpg
The Pontianak
Class overview
Name:Pontianak class
Builders: Koinklijke Fabriek van Stoom- en andere Werktuigen, Fijenoord, Rijkswerf Amsterdam
Operators:Flag of the Netherlands.svg  Royal Netherlands Navy
Preceded by: Riouwclass
Succeeded by: Samarangclass
Cost: 350,000 guilders
Completed: 5
Scrapped: 5
Preserved: 1
General characteristics
Type: Screw sloop-of-war
Displacement: 732 tons [1]
Length: 42 m (137 ft 10 in) [1]
Beam: 8.80 m (28 ft 10 in) [1]
Draught: 3.60 m (11 ft 10 in) [1]
Depth of hold: 4.04 m (13 ft 3 in)
Installed power: 90 nominal horsepower
Speed:
  • 8.15 knots (machines)
  • 9.75 knots (machines trial) [2]
Complement: 75 [1]
Armament:
  • 1 * 18 cm RML
  • 3 * 12 cm BL [1]
Armour: none

The Pontianak class was a class of steam screw sloops of the Royal Netherlands Navy.

Contents

The Dutch colonial navy in the 1870s

In the 1870s the navy in the Dutch East Indies consisted of an auxiliary squadron of four ships from the Netherlands, and the colonial navy of 22 ships. The auxiliary squadron was primarily responsible for external defense. The ships of the colonial navy (Indische Militaire Marine) were meant for transport and flotilla services. [3]

In the early 1870s the demands that a war against Aceh would place upon the colonial navy were severely underestimated. When the Aceh War actually erupted in 1873, its ships proved to be too defective and too few in number. The result was that an effective blockade and communications with the landing forces could not be maintained. The Dutch reacted by ordering crash construction of new ships.

Ordering

The ordering of the Pontianak class can be traced rather accurately. In May 1873 a budget law was proposed to increase the 1873 budget for the Dutch East Indies budget by 5.5 million guilders. Of this increase 1,400,000 guilders were meant for four steamships 4th class; 720,000 for two iron paddle steamers and 200,000 for ten steam launches. In a longer comment on the budget change, the government noted that the ships of the Indische Militaire Marine were made out of oak, and therefore not suitable for long service in the tropics. Due to extensive usage the number of seaworthy ships of that navy would soon be reduced to only 5: Borneo, Sumatra, Banka, Timor and Soerabaija. The four composite built ships of the Riouw type and the Sumatara steam paddle vessel would leave for the Indies in 1873. However, the 5 ships present also needed urgent maintenance to prevent them getting irreparably damaged by use. Therefore four more ships of the Riouw type (the Pontianak class) and one extra steam paddle vessel type Sumatra were required. In return the construction of one screw steamship 3rd class type Reteh would be cancelled. The construction, equipping and sending of these ships would take at least 12-14 months and therefore could not be delayed. [4]

The government also said that: Naval officers and ship building engineers agreed that the improved screw steam ships fourth class were an excellent type of ship for the tasks of the Indische Militaire Marine. As regards spaciousness and ventilation they did not suffer from the defects of the old steam ships fourth class, and offered the officers and men lodgings suitable to the Indian climate. They had the required steam power for regular service. Their new armament gave them more than enough fire power for the East Indies navy. They were especially recommended for 'station duty' (stationsdienst, many outposts had a ship posted in place for a long time) because of their moderate coal consumption. Their sail plan and hull made them excellent cruisers (cf. below for the contrary), giving occasion to train the crews. For the service these ships were just as useful as the screw steam ships third class, but they required less men. A good reason to prefer these screw steam ships fourth class at a time when recruiting became ever more difficult. [4]

Indeed the ships of the Pontianak class were laid down a few months later. In retrospective there was a comment that while Isaäc Dignus Fransen van de Putte was naval minister a.i. (18 December 1873 – 16 May 1874), four more steam ships fourth class, meant for the East Indies, were laid down and more paddle ships were started. These four fourth-class steamships arrived about the month September 1874. [5] It can be asserted below that the four screw steam ships arriving in the Indies about September 1874 indeed were four ships of the Pontianak class. These had been launched, (not laid down) during the ministry of Fransen van de Putte.

The Aruba was ordered at a different date than the other ships of the Pontianak class. She had the same dimensions, displacement and nominal power as the rest of the class [6] [1] , but she was build for the Dutch navy. However, in all probability she was the original design of the Pontianak class. In the May 1874 'final' budget for the navy the minister stated: The ships of the 3rd and 4th class are to be built like the Alkmaar and Aruba according to the composite system. [7]

Characteristics

Requirements

The ships of the Pontiak class were to join in executing the five tasks of the navy during the Aceh war. These were: blockading the coast of Aceh; supporting landing operations; transporting men and equipment of the expedition force; executing all kinds of communication services; executing punitive expeditions on the coast. [8]

The Pontianaks had to have enough machine power to catch blockade runners. They also needed some long range guns for the same purpose, and to attack the coast. Transporting men and equipment meant that they had to have sufficient cargo space. All this did not imply that anything elegant would be constructed. The requirement that the draught should not be more than 3.5 m gave even less freedom to design.

Dimensions

Design of Palembang and Sambas June 1874 Sambas and Palembang Dutch sloops 12 June 1874.png
Design of Palembang and Sambas June 1874

The Pontianaks were composite built, i.e. they had a wrought iron frame with wooden planking. They had a displacement of 732 tons. It made them of the size of the Vesuvius-class sloops which displaced 759 tons and preceded them by 15 years. The big difference was in the propulsion. While the Vesuvius was a class of sailing ships with auxiliary power, the Pontianaks were ships with full power which happened to have sails. The Vesuvius class had length * beam * draught 45.5 * 9.2 * 4.3 m, the Pontianaks 42.0 * 8.8 * 3.6 m. In other words, the Vesuvius class was much longer, wider and deeper than the Pontianaks, and yet displacement was almost the same. It reflects Tideman's note that the requirement that the ships should draw more than 3.5 m of water made the lines of the ships 'somewhat fuller than would otherwise have been desirable'. It also meant they had only bilge keels, not a regular keel. [9] On their first trip the seaworthiness of the Sambas and Palembang was reported as far from desirable. Both ships had broken the chain for the rudder, and one of them had a very leaky upper deck. They were also reported to pitch heavily. [10]

Propulsion

Photo titled Palembang and Sambas Zr. Ms. Schroefschepen 'Palembang' en 'Sambas' (titel op object), NG-MC-1331.jpg
Photo titled Palembang and Sambas

Machinery

It's reasonable to assert whether the machines of the class were about equal. The Sambas was said to get machines of 90 hp. [11] The same was also said about the Palembang. [12] The Bandjermasin was said to have machines of 300 ihp. [13] The Aruba was reported to have machines of nominal 90 hp and 350 ihp. [14]

On its trial run the Aruba made 9.75 knots at 123 turns. [15] Exacty the same was said of the trials of the Bandjermasin. [16] In all probability one of these statements is false.

Sailing

Sambas and Palembang were said to pitch heavily. [10] The Bandjermasin was said to sail only reasonably. [2] The sailing characteristics of the Aruba were noted as: sails badly, rolls heavily, takes much water due to heavy sail plan and rigging, and has a heavy weather helm . [2] The absence of a keel, and the 'rather full lines' mentioned above offer a logical explanation for the sailing characteristics.

Armament

The Bandjermasin and Pontianank each had a rifled muzzle loading gun of 18 cm and two 12 cm breach loaders. [17] The Aruba had the same armament. [14] Palembang and Sambas were also said to have an 18 cm gun. [18]

Ships in the class

Construction

NameLaid downLaunchedCommissionedFatePrincipalBuilt by
Pontianak 29 July 1873 [19] 20 December 1873 [20] 25 May 1874 [21] Sold 18 April 1898 [22] Indische Militaire MarineKoninklijke Fabriek
Aruba 30 December 1873 [23] 16 January 1876 [24] Dutch NavyRijkswerf Amsterdam
Sambas 12 July 1873 [11] 24 January 1874 [25] 10 May 1874 [26] Sold 1896 [27] Indische Militaire MarineFijenoord
Palembang 5 August 1873 [12] 3 March 1874 [28] 16 June 1874 [29] Sold 1888 [30] Indische Militaire MarineFijenoord
Bandjermasin 29 July 1873 [19] 7 March 1874 [13] 16 June 1874 [29] Sold 29 September 1894 [31] Indische Militaire MarineKoninklijke Fabriek

Arrival in the Indies

The Pontianak and Bandjermasin arrived at Aceh, East Indies on 11 September 1874 [32] On their way to Aceh the Palembang and Sambas reached Galle on Sri Lanka on 30 September 1874. On 14 October 1874 the Palembang and Sambas were reported to have arrived at Aceh. [33]


Related Research Articles

Conrad Theodor van Deventer Dutch politician

Conrad Theodor "Coen" van Deventer was a Dutch lawyer, an author about the Dutch East Indies and a member of parliament of the Netherlands. He became known as the spokesman of the Dutch Ethical Policy Movement. He lived at Surinamestraat 20, The Hague (1903–1915), former residence of John Ricus Couperus, his son writer Louis Couperus and the rest of his family (1884–1902).

<i>Heiligerlee</i>-class monitor

The Heiligerlee-class monitors were a group of 5 ironclad monitors built for the Royal Netherlands Navy in the late 1860s.

HNLMS <i>Heiligerlee</i>

HNLMS Heiligerlee, formerly known as Panter, was a Heiligerlee-class monitor built in England for the Royal Netherlands Navy in the 1860s. Among the new ships built for the Dutch navy the Heiligerlee was the first true monitor: a ship with shallow draught, only a few (heavy) guns and decent armor. These characteristics made her very suitable to operate way inland in the Dutch delta.

HNLMS <i>Cerberus</i>

HNLMS Cereberus, was a Heiligerlee-class monitor built in Amsterdam for the Royal Netherlands Navy in the 1860s. The Cerberus was a true monitor: a ship with shallow draught, only a few (heavy) guns and decent armor. These characteristics made her very suitable to operate way inland in the Dutch delta.

<i>Djambi</i>-class corvette

The Djambi class was a class of steam corvettes of the Royal Netherlands Navy. The class comprised Djambi, Zoutman, Willem, Leeuwarden, Metalen Kruis and Curaçao. Later two ships of a slightly revised type were built, the Zilveren Kruis and Van Galen

<i>Watergeus</i>-class sloop Netherlands class of warships

The Watergeus class was a class of screw sloop-of-war of the Royal Netherlands Navy. The class comprised the 'Watergeus' and the Marnix. A third ship that had been planned was cancelled.

<i>Zilveren Kruis</i>-class corvette Class of warship in the Netherlands

The Zilveren Kruis class was a class of two steam corvettes of the Royal Netherlands Navy. The class comprised the Zilveren Kruis and the Van Galen.

<i>Groningen</i>-class corvette Dutch class of steam corvettes

The Groningen class was a class of steam corvettes of the Royal Netherlands Navy. The class comprised Groningen, Citadel van Antwerpen and Vice-Admiraal Koopman

<i>Medusa</i>-class corvette Netherlands class of warship

The Medusa class was a class of 2 steam corvettes with auxiliary power of the Royal Netherlands Navy. The class comprised the Medusa, the first Dutch warship with screw propulsion, and the Prinses Amelia.

HNLMS <i>Djambi</i> (1860)

HNLMS Djambi, was the lead ship of the Djambi-class, built for the Royal Netherlands Navy from the late 1850's. She was in the 1864 Shimonoseki affair and in the 1873 First Aceh Expedition. She became unfit for service after serving for only 13 years.

HNLMS <i>Wassenaar</i> (1856)

HNLMS Wassenaar, was a unique ship built for the Royal Netherlands Navy.

<i>Evertsen</i>-class frigate Dutch class of steam frigates

The Evertsen class was a class of steam frigates of the Royal Netherlands Navy. The class comprised Evertsen and Zeeland

HNLMS <i>Adolf van Nassau</i> (1861)

HNLMS Adolf van Nassau, was a unique ship built for the Royal Netherlands Navy.

<i>Vesuvius</i>-class sloop

The Vesuvius class was a class of steam screw sloops of the Royal Netherlands Navy. The class comprised Vesuvius, Cornelis Dirks, Reinier Claessen, Het Loo, Reteh and Prinses Maria.

Abraham Johannes de Smit van den Broecke (Aardenburg, 13 May 1801 - Oost-Souburg, was a career officer of the Royal Dutch Navy and a conservative minister for the navy.

Van Vlissingen en Dudok van Heel

Van Vlissingen en Dudok van Heel was a famous nineteenth-century Dutch machine factory. It built steam engines and machinery for the sugar industry and for maritime purposes, as well ships, rolling stock and large metal structures like the Moerdijk bridge and a floating dock. In 1871 it was reorganized to become the public company Koninklijke Fabriek van Stoom- en andere Werktuigen. In a second reorganization in 1890, parts of it were saved and continued under the name Koninklijke Nederlandsche Fabriek van Werktuigen en Spoorwegmaterieel, renamed to Werkspoor in 1927.

<i>Samarang</i>-class sloop

The Samarang class was a class of steam screw sloops of the Royal Netherlands Navy. The class originally comprised Samarang, Batavia and Makassar, but was later extended.

Wiltons Dok- en Werf Maatschappij

Wilton's Dok- en Werf Maatschappij was a Dutch shipyard active as an independent company from 1854 till 1929. At first it was simply known as 'Wilton'. In 1921 the final Dutch name became: 'Wilton's Dok- en Werf Maatschappij NV', the equivalent of 'Wilton Engineering and Slipway Company'. Wilton started as a traditional smithy and expanded in machinery. It specialized in ship repairs, but also became a shipyard. At first only for fresh water ships. In spite of multiple name changes the company was commonly referred to as 'Wilton'. In 1929 a merger with Fijenoord led to a new company known as Wilton-Fijenoord.

Fijenoord Shipbuilding and machine factory in Rotterdam

Fijenoord was a shipbuilding and machine factory in Rotterdam the Netherlands from 1823 to 1929. In 1929 it merged with Wilton to become Wilton-Fijenoord.

<i>Riouw</i>-class sloop

The Riouw class was a class of four steam screw sloops of the Royal Netherlands Navy. They were the first composite built ships of the Dutch navy.

References

Notes

  1. 1 2 3 4 5 6 7 Tideman 1880, p. 2e afd p. 14.
  2. 1 2 3 Tideman 1880, p. D p. 14.
  3. Stapelkamp 2010, p. 12.
  4. 1 2 "Staten-Generaal". Arnhemsche courant. 10 May 1873.
  5. "Vervolg der Nieuwstijdingen". De locomotief. 16 March 1875.
  6. Tideman 1880, p. Livret D p. 12.
  7. "Binnenland". Algemeen Handelsblad. 1 June 1874.
  8. Stapelkamp 2010, p. 25.
  9. Tideman 1880, p. Livret D p. 1.
  10. 1 2 "Uit Nederland". De locomotief. 23 September 1874.
  11. 1 2 "Marine". Java-bode. 25 August 1873.
  12. 1 2 "Nederland". Java-bode. 13 September 1873.
  13. 1 2 "Binnenland". De Standaard. 9 March 1874.
  14. 1 2 Tweede Kamer 1875, p. Bijlage A Algemeen Overzigt der Schepen en vaartuigen van oorlog op den 1sten Augustus 1875.
  15. "Gemengd Nieuws". Het nieuws van den dag. 30 August 1875.
  16. Tideman 1880, p. Livret D p. 14.
  17. "Binnenland". Provinciale Overijsselsche. 13 July 1874.
  18. "Samarang". De locomotief. 6 November 1874.
  19. 1 2 "Nederland". Java-bode. 5 September 1873.
  20. "Binnenlandsch Nieuws". Het nieuws van den dag. 22 December 1873.
  21. "Binnenland". Algemeen Handelsblad. 18 May 1874.
  22. "Op Maandag den 18en April a.s." De locomotief. 26 March 1898.
  23. "Binnenlandsche Berigten". Nederlandsche staatscourant. 1 January 1874.
  24. "Ministerie van Marine". Nederlandsche staatscourant. 5 January 1876.
  25. "Te water gelaten schepen". De Standaard. 27 January 1874.
  26. "Binnenlandsche Berigten". Nederlandsche staatscourant. 25 April 1874.
  27. "Verspreide Indische Berichten". De locomotief. 19 March 1896.
  28. "Rotterdam, 3 maart". De Standaard. 5 March 1874.
  29. 1 2 "Binnenlandsch Nieuws". Het nieuws van den dag. 29 May 1874.
  30. "Op Zaterdag den 21en April 1888". De locomotief. 31 March 1888.
  31. "Nederlandsche Koloniën". Algemeen Handelsblad. 2 November 1894.
  32. "Binnenlandsche Berigten". Nederlandsche staatscourant. 14 September 1874.
  33. "Binnenland". De Tijd. 16 October 1874.