Riouw-class sloop

Last updated
Halfmodel van een schroefstoomschip, NG-MC-1272.jpg
1872 half model of the Riouw and Banda with dimensions
Class overview
Name:Riouw class
Builders: Koinklijke Fabriek, Fijenoord
Operators:Flag of the Netherlands.svg  Royal Netherlands Navy
Succeeded by: Pontianakclass
Completed: 4
Scrapped: 4
General characteristics
Type: Screw sloop-of-war
Displacement: 695 tons [1]
Length: 42 m (137 ft 10 in) [1]
Beam: 8.40 m (27 ft 7 in) [1]
Draught: 3.60 m (11 ft 10 in) [1]
Depth of hold: 4 m (13 ft 1 in)
Installed power: 80 nominal horsepower
Complement: 75 [1]
Armament:
  • 1 * 16 cm RML
  • 2 * 30-pdr SBML [1]
Armour: none

The Riouw class was a class of four steam screw sloops of the Royal Netherlands Navy. They were the first composite built ships of the Dutch navy.

Contents

The Dutch colonial navy in the 1870s

In the 1870s the navy in the Dutch East Indies consisted of an auxiliary squadron of four ships from the Netherlands, and the colonial navy of 22 ships. The auxiliary squadron was primarily responsible for external defense. The ships of the colonial navy (Indische Militaire Marine) were meant for transport and flotilla services. [2]

From the introduction of screw propulsion up to the 1870s almost 20 small wooden steam screws ships were built for the Indische Militaire Marine. Next to these screw-driven ships an almost equal number of steam paddle-ships were built, most of them from iron. The wooden screw ships tended to decay quickly, and so the Dutch navy began to look into the possibilities of composite built ships.

Ordering

In early 1870 the department of the Indische Militaire Marine in Batavia asked the Dutch Navy in The Hague to immediately start the construction of four screw steamships fourth class. The reason was that a number of these vessels present in the Indies would soon have to be decommissioned because of their condition and advanced age. The department in Batavia was confident that the Dutch shipyards knew how to construct these vessels, and had only determined that the vessels should be made of Teak from Java, and should be 4 meters longer than the previous ships in order to have more room for storage, and to be able to load more coal. Also the lines should be somewhat finer and the carronades should be replaced by 3-4 rifled guns. The problem in the Netherlands was that just at that time, the navy wanted to switch to composite built ships, and so designing these ships took a whole lot more time. [3]

In the budget for 1872 there was mention of the construction of a composite built ship of the third class [4] , first named Etna, later Alkmaar. At the end of 1871 four composite-built screw steamships of 80 hp were ordered. [5]

Characteristics

The composite screw steamship in the Dutch East Indies

The main defect of the screw steamships preceding the Riouw class was their very short lifespan when used in the tropics. This subject is complicated. Traditionally warships were built from oak and were built at a very slow pace. This gave the oak wood used in the construction of ships the time to become even more resistant to the rot and decay brought on by maritime use. The obvious example of this is the HNLMS Wassenaar (1856). She was started before 1834, served for many years and was only demolished in 1913.

However, in the age of steam most wooden screw ships faced three problems: The first problem was that the builders were not allowed to take so much construction time when technology was advancing so quickly. Therefore the oak wood used did not get enough time to season. The second problem was that by the mid-nineteenth century good oak was becoming more and more scarce. Therefore the quality of the oak used was worse then it had been. The third problem had to do with steam propulsion itself. The heat and humidity of the engines inside the ship harbored vermin, especially white ants [6] (as termites were called at the time). The heat also accelerated the growth of dry rot, caused by a group of funghi.

Wooden screw steam ships in the tropics were therefore vulnerable to shipworms on the outside and extra vulnerable to termites and dry rot on the inside. The solution to these problems was the composite ship. The frame/structure was made of wrought iron and gave the composite ship the rigidity that was so essential for the free movement of the screw axle. The iron frame also made the structure (but not the whole ship) immune to termites and dry rot. The wooden planking / hull of the ship allowed the attachment of copper sheathing that kept the barnacle and other pests from attaching themselves to the ship, and kept the shipworm out. Because of the many wooden parts (decks, internal walls) still used in the composite ship, it was not free from these plagues, but it was less vulnerable.

Dimensions

The Riouw class was 42 m long, had a beam of 8.4 m, a draught of 3.6 m and displaced 695 ton. The depth of hold (from the upper deck to the upper surface of the keel) was 4 m, and gives an idea of the rather cramped conditions on board. Still, it was a lot better than the space provided by previous ships. These measured 38 m * 8.16 * 3.20 at 586 ton. The Riouw class was indeed 4 m longer like the Colonial navy had asked. The displacement was almost 20% more, while the number of crew stayed the same, and so the class had a bigger capacity for cargo or living conditions.

In May 1873 a budget law was proposed to increase the East Indies budget, so the Aceh War could be continued. It requested money to build the four ships of the Pontianak class. It founded the choice for the Pontianak design by giving a description of the four steamships improved fourth class, composite construction type Riouw, which would be a model for the Pontianak class. Naval officers and ship building engineers were said to agree that the improved screw steam ships fourth class were an excellent type of ship for the tasks of the Dutch Colonial Navy. As regards spaciousness and ventilation they did not suffer from the defects of the old steam ships fourth class, and offered the officers and men lodgings suitable to the Indian climate. [7]

Propulsion

Machinery

The ships of the Riouw class had engines of 80 nominal hp. This was equal to the nominal power of most previous screw steamships of the fourth class.

Sailing

In the description of the Riouw class they were said to be especially recommended for 'station duty' (stationsdienst, many outposts had a ship posted in place for a long time) because of their moderate coal consumption. They were also fine cruisers on account of their sail plan and hull. [7] This could not have been based on experience, because the lead ship Riouw had only been commissioned a few days before this statement. There is a report that the Riouw was a bad sailer (Dutch: zeilt niet best) [8] Furthermore, by what is known of the sailing characteristics of the succeeding Pontianak class, it's also not that likely that the Riouw class had good sailing characteristics.

Armament

Tideman gave the armament of the Riouw class as one 16 cm rifled gun and two medium 30-pounder SBML. [1] In the 1870s the medium 30-ponder SBML was a typical Age of Sail gun that would not particularly scare anybody. The rifled 16 cm muzzle loader was something different. It outranged all traditional smooth bore muzzle loading guns, and was far more accurate. The downside of most Dutch 16 cm RML's was that they were worn out very quickly.

Criticism

In 1884 a critic noted that of the four ships built in the unhappy year 1872, two were declared unfit when only 11 years old (Amboina and Deli), and one would only last two years longer (The Riouw). [9] With respect to the duration of the service of these ships, one of course has to consider that actual service will wear out ships sooner than laying in port. However, the average duration of the service of the Riouw class is indeed significantly much lower than that of the succeeding Pontianak class. In all probability the Dutch shipyards were more experienced in composite construction when they built the Pontianak class.

Ships in the class

Construction

NameLaid downLaunchedCommissionedFatePrincipalBuilt by
Riouw 11 May 1872 [10] 30 October 1872 [11] 26 April 1873 [12] Unfit April 1887 [13] Dutch Colonial NavyFijenoord
Banda May 187213 December 1872 [14] 20 May 1873 [15] 1889 hydrographic s. [16] , dec. 6 June 1899 [17] Dutch Colonial NavyFijenoord
Amboina 21 January 1873 [18] 20 May 1873 [15] decom. 10 March 1881 [19] Sold 13 May 1882Dutch Colonial NavyKoninklijke Fabriek van Stoom- en andere werktuigen
Deli 10 April 1873 [20] 1 October 1873 [21] Unfit 15 March 1883 [22] Dutch Colonial NavyKoninklijke Fabriek van Stoom- en andere werktuigen

Related Research Articles

<i>Heiligerlee</i>-class monitor

The Heiligerlee-class monitors were a group of 5 ironclad monitors built for the Royal Netherlands Navy in the late 1860s.

HNLMS <i>Heiligerlee</i>

HNLMS Heiligerlee, formerly known as Panter, was a Heiligerlee-class monitor built in England for the Royal Netherlands Navy in the 1860s. Among the new ships built for the Dutch navy the Heiligerlee was the first true monitor: a ship with shallow draught, only a few (heavy) guns and decent armor. These characteristics made her very suitable to operate way inland in the Dutch delta.

<i>Djambi</i>-class corvette

The Djambi class was a class of steam corvettes of the Royal Netherlands Navy. The class comprised Djambi, Zoutman, Willem, Leeuwarden, Metalen Kruis and Curaçao. Later two ships of a slightly revised type were built, the Zilveren Kruis and Van Galen

<i>Watergeus</i>-class sloop Netherlands class of warships

The Watergeus class was a class of screw sloop-of-war of the Royal Netherlands Navy. The class comprised the 'Watergeus' and the Marnix. A third ship that had been planned was cancelled.

<i>Zilveren Kruis</i>-class corvette Class of warship in the Netherlands

The Zilveren Kruis class was a class of two steam corvettes of the Royal Netherlands Navy. The class comprised the Zilveren Kruis and the Van Galen.

<i>Groningen</i>-class corvette Dutch class of steam corvettes

The Groningen class was a class of steam corvettes of the Royal Netherlands Navy. The class comprised Groningen, Citadel van Antwerpen and Vice-Admiraal Koopman

<i>Medusa</i>-class corvette Netherlands class of warship

The Medusa class was a class of 2 steam corvettes with auxiliary power of the Royal Netherlands Navy. The class comprised the Medusa, the first Dutch warship with screw propulsion, and the Prinses Amelia.

HNLMS <i>Djambi</i> (1860)

HNLMS Djambi, was the lead ship of the Djambi-class, built for the Royal Netherlands Navy from the late 1850's. She was in the 1864 Shimonoseki affair and in the 1873 First Aceh Expedition. She became unfit for service after serving for only 13 years.

HNLMS <i>Wassenaar</i> (1856)

HNLMS Wassenaar, was a unique ship built for the Royal Netherlands Navy.

<i>Evertsen</i>-class frigate Dutch class of steam frigates

The Evertsen class was a class of steam frigates of the Royal Netherlands Navy. The class comprised Evertsen and Zeeland

<i>Vesuvius</i>-class sloop

The Vesuvius class was a class of steam screw sloops of the Royal Netherlands Navy. The class comprised Vesuvius, Cornelis Dirks, Reinier Claessen, Het Loo, Reteh and Prinses Maria.

Van Vlissingen en Dudok van Heel

Van Vlissingen en Dudok van Heel was a famous nineteenth-century Dutch machine factory. It built steam engines and machinery for the sugar industry and for maritime purposes, as well ships, rolling stock and large metal structures like the Moerdijk bridge and a floating dock. In 1871 it was reorganized to become the public company Koninklijke Fabriek van Stoom- en andere Werktuigen. In a second reorganization in 1890, parts of it were saved and continued under the name Koninklijke Nederlandsche Fabriek van Werktuigen en Spoorwegmaterieel, renamed to Werkspoor in 1927.

<i>Samarang</i>-class sloop

The Samarang class was a class of steam screw sloops of the Royal Netherlands Navy. The class originally comprised Samarang, Batavia and Makassar, but was later extended.

Wiltons Dok- en Werf Maatschappij

Wilton's Dok- en Werf Maatschappij was a Dutch shipyard active as an independent company from 1854 till 1929. At first it was simply known as 'Wilton'. In 1921 the final Dutch name became: 'Wilton's Dok- en Werf Maatschappij NV', the equivalent of 'Wilton Engineering and Slipway Company'. Wilton started as a traditional smithy and expanded in machinery. It specialized in ship repairs, but also became a shipyard. At first only for fresh water ships. In spite of multiple name changes the company was commonly referred to as 'Wilton'. In 1929 a merger with Fijenoord led to a new company known as Wilton-Fijenoord.

Fijenoord Shipbuilding and machine factory in Rotterdam

Fijenoord was a shipbuilding and machine factory in Rotterdam the Netherlands from 1823 to 1929. In 1929 it merged with Wilton to become Wilton-Fijenoord.

<i>Pontianak</i>-class sloop

The Pontianak class was a class of steam screw sloops of the Royal Netherlands Navy.

<i>Ever</i>-class gunboat

The Ever class was a class of 14 flat-iron gunboats of the Royal Netherlands Navy.

<i>Hector</i>-class gunvessel

The Hector class was a class of 2 gunvessels of the Royal Netherlands Navy. The class proved a failure.

<i>Haarlemmermeer</i>-class gunvessel

The Haarlemmermeer class was a class of 9 gunvessels of the Royal Netherlands Navy. The class was a failure because of its extreme susceptibility to dry rot.

<i>Soestdijk</i>-class gunvessel

The Soestdijk class was a class of 8 gunvessels of the Royal Netherlands Navy. The class was built to the same design as the preceding Haarlemmermeer class, but proved far more durable.

References

Notes

  1. 1 2 3 4 5 6 7 Tideman 1880, p. 2e afd p. 14.
  2. Stapelkamp 2010, p. 12.
  3. Baart de la Faiile 1882, p. 346.
  4. "Staatsbegroting voor 1872". Arnhemsche courant. 28 September 1871.
  5. "Zeemacht". De locomotief. 18 December 1872.
  6. Mirror 1834, p. 643.
  7. 1 2 "Staten-Generaal". Arnhemsche courant. 10 May 1873.
  8. Tideman 1880, p. Livret D p. 15.
  9. "Is verandering in den toestand der maritieme middelen in Oost-Indië wenschelijk?". Algemeen Handelsblad. 8 June 1884.
  10. "'s Hertogenbosch, 2 November". Provinciale Noordbrabantsche. 3 November 1872.
  11. "Binnenland". Algemeen Handelsblad. 1 November 1872.
  12. "Fijenoord, 26 April". De Standaard. 29 April 1873.
  13. "Binnenland". Algemeen Handelsblad. 25 September 1887.
  14. "Binnenland". Provinciale Overijsselsche. 14 December 1872.
  15. 1 2 "Binnenlandsche Berigten". Nederlandsche staatscourant. 15 May 1873.
  16. "Binnenland". Haagsche courant. 27 June 1889.
  17. "Nederlandsch-Indië". Soerabaijasch handelsblad. 31 May 1899.
  18. "Amsterdam, 21 Januari". De standaard. 22 January 1873.
  19. "Verkorte balans der Javasche bank". Nederlandsche staatscourant. 11 October 1881.
  20. "Marine en Leger". Bataviaasch handelsblad. 24 May 1873.
  21. "Binnenland". De Standaard. 3 October 1873.
  22. "Uit Insulinde's hoofdstad". Soerabaijasch handelsblad. 2 November 1883.