Praga E-51

Last updated

Praga E-51
Walter Sagitta I-MR a Praga E-51 (1938) a.jpg
Rolereconnaissance and light bomber
National origin Czecho-Slovakia
Manufacturer Praga
DesignerJaroslav Šlechta
First flight26 May 1938
Number built1 prototype

The Praga E-51 is a Czechoslovakian reconnaissance aircraft and light bomber built by Praga in the 1930s. [1] Development was halted by the annexation of Czechoslovakia by Germany, after only one prototype had been built. The appearance of the construction is very reminiscent of the contemporary twin engined fighter, the Fokker G.I from Holland.

Contents

Design and development

The unconventional twin-boom airplane project under Jaroslav Šlechta began in 1936 as a response to a Ministry of National Defence specification which called for the design and construction of a new reconnaissance aircraft to operate over combat zones. The short-range reconnaissance three-seater was to be capable of monitoring activity behind enemy lines; the requirement highlighted the importance of good view from the cockpit as well as of placement of the on-board cameras, which were to be able to collect as many shots as possible at as wide an angle as possible in one flyover. [2] The new aircraft was to replace the aging Letov Š-328 and Aero A-100. There were three entries to the tender: the Letov Š-50, the ČKD-Praga E-51 and the Aero A-304. [3]

The E-51 was designed as a twin-boom twin-engine mid-wing aircraft with a central nacelle housing the cockpit and armament; the booms were elongations of the engine nacelles and each carried a rudder, with the elevator placed between them. The E-51 was Šlechta's first design based on such a configuration. Because the reconnaissance airplane had to be able to escape enemy fighters, a high top speed was a number one priority, meaning a suitable engine had to be found. Šlechta considered three options: the inline Praga FR with an output of 456 kW/355 hp, the inverted V-12 Walter Sagitta with an output of 367-412 kW/500-600 hp, and the radial 9-cylinder Avia Rk.17 at 261 kW/355 hp. As Praga's FR had not been finished yet and the Rk.17 was not powerful enough, Šlechta opted for the Sagitta. It was the first and only implementation of the Czechoslovak engine by Walter Aircraft Engines in a Czechoslovak airplane. [4]

The aircraft was made using Czechoslovakia-supplied material and fitted with Czechoslovak (with a few exceptions) armaments. The simple wood and welded steel-tubes frame made both assembly and maintenance easy, and operation as well. The durability of the skin allowed for outdoor storage while on duty. The design is said to precede that of the Fokker G.I, a more well-known example of the same design configuration, as the latter has, unlike the E-51, actually entered service. [5]

The E-51 was the last design by Praga before World War II began. [6]

Specifications (E-51)

Data from PRAGA E-51 [7]

General characteristics

Performance

Armament

  • 1 × forward-firing 7.92 mm Vz.30 machine gun
  • 1 × 7.92 mm vz.30 in a flexible holder

Related Research Articles

Aero Ae-45

The Aero 45 was a twin-piston engined civil utility aircraft produced in Czechoslovakia after World War II. Aero Vodochody produced the aircraft in 1947–1951, after which the Let Kunovice rolled out these planes until 1961. In 1958 the Ae-45S became the first Czechoslovak plane to cross the Atlantic Ocean. It was the first product of the nation's postwar aviation industry and proved a great success, with many of the 590 produced being exported.

Aero A.12

The Aero A.12 was a Czechoslovakian biplane light bomber and military reconnaissance aircraft manufactured in small numbers shortly after World War I. Although reminiscent of the Hansa-Brandenburg-designed aircraft that Aero was building during the war under licence as the Ae.10, the A.12 was the company's own design. It is perhaps most significant as the direct descendant of the highly successful A.11 and its various derivatives. An example of the type is preserved at the Letecké Muzeum in Kbely.

Aero A.30

The Aero A.30 was a biplane light bomber and reconnaissance aircraft built in Czechoslovakia in the late 1920s. It originated as an attempt by Aero to improve the performance of the Aero A.11, but soon evolved into quite a different aircraft, larger and more powerful than its predecessor. The aircraft is readily distinguished from other related types by the difference in spans between its wings – the upper set being of much greater span than the lower.

Aero A.100

The Aero A.100 was a biplane light bomber and reconnaissance aircraft built in Czechoslovakia during the 1930s. It was the final step in a design lineage that extended back to the Aero A.11 a decade earlier. A.100s remained in service throughout World War II and for a few years postwar.

Avia BH-5

The Avia BH-5 was a two-seat sport aircraft built in Czechoslovakia in 1923. It was based on the firm's experience with the BH-1 and shared that aircraft's basic design: a low-wing, braced monoplane. It received the nickname "Boska" due to its registration, L-BOSA, an appellation that was later transferred to the various Avia aircraft derived from this design. The BH-5 was flown competitively by Zdeněk Lhota at the Belgian Touring Aircraft Contest in Brussels in 1923, and won both the overall prize for the event and the King of Belgium Prize. The same year, it won the first prize in its class in the Czechoslovak President of the Republic Competition.

Let L-200 Morava

The Let L-200 Morava is a two-engine touring and light passenger aircraft of the 1960s, designed and produced by Let Kunovice in the Czech Republic.

Avia BH-25

The Avia BH-25 was a biplane airliner built in Czechoslovakia in 1926.

Avia BH-26

The Avia BH-26 was a two-seat armed reconnaissance aircraft built in Czechoslovakia in 1927. It was a single-bay unstaggered biplane with equal-span wings and a fixed tailskid undercarriage. Both upper and lower wings featured long-span ailerons, which were dynamically balanced by a small auxiliary airfoil mounted to the upper surface of the lower ailerons. Its design was typical of this type of aircraft built during World War I and the years following; pilot and observer sat in tandem open cockpits with the observer armed with a machine gun on a ring mount. As with many other Avia designs, the BH-26 originally had no fixed fin, only a rudder, but this was changed in service.

Avia BH-29

The Avia BH-29 was a trainer aircraft built in Czechoslovakia in 1927, in the hope of marketing it to both the Czechoslovakian Army, and to Czechoslovakian Airlines as a primary trainer. It was an conventional design, an unequal-span biplane of wooden construction and with tailskid undercarriage. The pilot and instructor sat in tandem open cockpits. A more powerful version was built, powered by a 120 hp (89 kW) Walter NZ-120 radial engine.

The Letov Š-16 was a Czechoslovak single-engined, two-seat biplane bomber. It was designed by Alois Šmolík at Letov Kbely. The Š-16 first flew in 1926.

Letov Š-28

The Letov Š-28 was a Czechoslovak single-engined, two-seat reconnaissance aircraft. It was manufactured by Letov Kbely in a number of versions with different powerplants. The most important version was the Š-328, which was produced in relatively high quantities.

Letov Š-6

The Letov Š-6 was a bomber aircraft produced in Czechoslovakia during the 1920s. Derived from the Š-2, it was a biplane of conventional design. The wing cellule was an all-new design with a thicker profile, and while it had been intended to build them with a metal structure, wood was used instead due to shortages. Performance during testing was so promising that in 1924 an Š-6 was used to set a new altitude record with a 500 kg payload, and a national endurance record of 10 h 32 min.

Letov Š-20

The Letov Š-20 was a fighter aircraft produced in Czechoslovakia during the 1920s.

Praga BH-41

The Praga BH-41, later redesignated E-41, was a military advanced trainer aircraft produced in Czechoslovakia during the 1930s.

The Letov Š-33 was a 1930s prototype Czechoslovakian long-range bomber, designed and built by Letov.

Aero HC-2 Heli Baby

The Aero HC-2 Heli Baby is a two-seat light general-purpose utility helicopter, designed by engineer Jaroslav Slechta, and produced by the Czechoslovakian company Aero Vodochody in the 1950s. It has a three-bladed main rotor, and a two-bladed tail rotor. The helicopter has an entirely metal frame and cockpit, and windows made of Plexiglas. It was the first and the only Czechoslovakian-designed helicopter to be produced.

The Letov Š-12 was a fighter aircraft built by Letov in the early 1920s.

The Letov Š-25 was a Czechoslovak single-engined, two-seat biplane trainer. It was designed by Alois Smolík at Letov Kbely.

Walter NZ 85

The Walter NZ 85 was a seven-cylinder, air-cooled, radial engine for aircraft use built in Czechoslovakia by Walter Aircraft Engines in the late-1920s.

Walter Minor 12 1930s Czech piston aircraft engine

The Walter Minor 12 was a 12-cylinder, air-cooled, V engine for aircraft use built in Czechoslovakia by Walter Aircraft Engines in the late-1930s.

References

  1. ↑ "Letadla z ČKD ohromovala odbornou i laickou veřejnost. Tedy některá". iDNES.cz. January 2, 2018.
  2. ↑ Šorel, Václav (2005). Encyklopedie českého a slovenského letectví I (in Czech). Brno: CP Books. p. 60. ISBN   80-251-0733-7.
  3. ↑ "Praga E-51" (in Russian). Уголок неба (airwar.ru). 2017. Retrieved 2020-04-08.
  4. ↑ Němeček, Václav (1983). Československá letadla 1 (1918-1945) (in Czech) (III ed.). Praha: Naše vojsko. pp. 176–178, 260–261, 272–273.
  5. ↑ K., F. (1939). "Trojmístný pozorovací letoun Praga E-51". Letectví (in Czech). XIX. (12): 200–203.
  6. ↑ "Praga E-51". Praha: pragaglobal.com. Retrieved 2020-05-08.
  7. ↑ "PRAGA E-51". www.vinar.cz (in Czech). Prague. Retrieved 8 October 2020.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.