Queen Anne pistol

Last updated
Flintlock pistol in "Queen Anne" layout, made in Lausanne by Galliard, circa 1760. On display at Morges military museum. Pistolet a silex Queen Anne IMG 3172.jpg
Flintlock pistol in "Queen Anne" layout, made in Lausanne by Galliard, circa 1760. On display at Morges military museum.

Queen Anne pistols are a type of breech-loading flintlock pistol known as a turn-off pistol, in which the chamber is filled from the front and accessed by unscrewing the barrel. Another distinguishing feature of the design is that the lock-plate and the breech section (chamber) of the firearm are forged as a single piece. Possibly first made in England, [1] they came in fashion in England during the reign of Queen Anne (reigned 1702–1714) and are consequently so named. This type of pistol is noted for being made small, so that it could be easily carried and concealed. Carbines of this design are also documented. [2]

Contents

Design

Queen Anne pistols are flintlock pistols with three defining characteristics. They have a turn-off barrel, typically with a swelled cannon muzzle, and are chamber-loaded. The body of the pistol (the breech) and the lock-plate are forged as a single piece. The frizzen spring is located to the rear of the frizzen rather than the conventional position, in front of it. To the last of these, this is a functional modification, such that the springs location does not obstruct removal of the barrel for loading. The lock-plate is integral with the body, and is sometimes described as a boxlock in consequence. It is nonetheless offset to one side with the mechanism assembled either side of the plate and is otherwise a conventional sidelock design. This is substantially different from the usual use of the term associated with Anson and Deeley patented shotgun design, where the firing mechanism is mounted within the frame of the firearm rather than off the sides of a lock-plate. [3] [4] [5] [6]

Queen Anne pistols are typically rifled. To load, the barrel unscrews (with the aid of a spanner) just in advance of the chamber recess, that is filled with powder. The ball is placed in a conical seat (cup) at the end of the chamber before replacing the barrel. The breech end of the barrel is slightly enlarged to accept the ball. Upon firing, the ball fills the grooves of the rifling to create an effective seal. [4]

The design was particularly suited to producing a small pistol that could be easily carried and concealed. They may be referred to as an overcoat pistol, a toby or a muff pistol. Queen Anne pistols usually exhibit a high level of decorative finish and workmanship. [4]

Related Research Articles

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and used by an individual. The term is legally defined further in different countries.

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Percussion cap</span> Ignition source in a type of firearm mechanism

The percussion cap, percussion primer, or caplock, introduced in the early 1820s, is a type of single-use percussion ignition device for muzzle loader firearm locks enabling them to fire reliably in any weather condition. Its invention gave rise to the caplock mechanism or percussion lock system which used percussion caps struck by the hammer to set off the gunpowder charge in rifles and cap and ball firearms. Any firearm using a caplock mechanism is a percussion gun. Any long gun with a cap-lock mechanism and rifled barrel is a percussion rifle. Cap and ball describes cap-lock firearms discharging a single bore-diameter spherical bullet with each shot.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

<span class="mw-page-title-main">Flintlock</span> Firearm with flint-striking ignition

Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as the snaplock and snaphaunce.

<span class="mw-page-title-main">Wheellock</span> Firearm action

A wheellock, wheel-lock, or wheel lock is a friction-wheel mechanism which creates a spark that causes a firearm to fire. It was the next major development in firearms technology after the matchlock and the first self-igniting firearm. Its name is from its rotating steel wheel to provide ignition. Developed in Europe around 1500, it was used alongside the matchlock, the snaplock, the snaphance, and the flintlock.

<span class="mw-page-title-main">Semi-automatic pistol</span> Type of pistol

A semi-automatic pistol is a handgun that automatically ejects and loads cartridges in its chamber after every shot fired. Only one round of ammunition is fired each time the trigger is pulled, as the pistol's fire control group disconnects the trigger mechanism from the firing pin/striker until the trigger has been released and reset.

A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.

<span class="mw-page-title-main">Breechblock</span> Part of the firearm action

A breechblock is the part of the firearm action that closes the breech of a breech loading weapon before or at the moment of firing. It seals the breech and contains the pressure generated by the ignited propellant. Retracting the breechblock allows the chamber to be loaded with a cartridge.

<span class="mw-page-title-main">Lock (firearm)</span>

The lock of a firearm is the mechanism used to initiate firing. It is a historical term, in that it generally refers to such mechanisms used in muzzle-loading and early breech-loading firearms. Side-lock refers to the type of construction, in which the individual components of the mechanism are mounted either side of a single plate. The assembly is then mounted to the stock on the side of the firearm. In modern firearm designs, the mechanism to initiate firing is generally constructed within the frame or receiver of the firearm and is referred to as the firing or trigger mechanism.

<span class="mw-page-title-main">M1819 Hall rifle</span> Rifle

The M1819 Hall rifle was a single-shot breech-loading rifle designed by John Hancock Hall, patented on May 21, 1811, and adopted by the U.S. Army in 1819. It was preceded by the Harpers Ferry M1803. It used a pivoting chamber breech design and was made with either flintlock or percussion cap ignition systems. The years of production were from the 1820s to the 1840s at the Harpers Ferry Arsenal. This was the first breech-loading rifle to be adopted in large numbers by any nation's army, but not the first breech-loading military rifle – the Ferguson rifle was used briefly by the British Army in the American Revolutionary War. The Hall rifle remained overshadowed by common muskets and muzzleloading rifles which were still prevalent until the Civil War. The early flintlocks were mostly converted to percussion ignition.

<span class="mw-page-title-main">Break action</span> Type of firearm action

Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Kalthoff repeater</span> 17th century Danish firearm

The Kalthoff repeater was a type of repeating firearm that was designed by members of the Kalthoff family around 1630, and became the first repeating firearm to be brought into military service. At least nineteen gunsmiths are known to have made weapons following the Kalthoff design. Some early Kalthoff guns were wheellocks, but the rest were flintlocks. The capacity varied between 5 and 30 rounds, depending on the style of the magazines. A single forward and back movement of the trigger guard, which could be done in 1–2 seconds, readied the weapon for firing. The caliber of Kalthoff guns generally varied between 0.4–0.8 in (10–20 mm), though 0.3 in (7.6 mm) caliber examples also exist.

The following are terms related to firearms and ammunition topics.

<span class="mw-page-title-main">Belton flintlock</span> Musket

The Belton flintlock was a repeating flintlock design using superposed loads, conceived by Philadelphia, Pennsylvania, resident Joseph Belton some time prior to 1777. The musket design was offered by Belton to the newly formed Continental Congress in 1777. Belton wrote that the musket could fire eight rounds with one loading, and that he could support his claims "by experimental proof." Belton failed to sell the musket to Congress, and later was unable to sell the design to the British Army a year after the American Revolution. There are no records that indicate that the gun was ever supplied, and it is uncertain if or how exactly the Belton improvement operated.

<span class="mw-page-title-main">Multiple-barrel firearm</span> Type of firearm with more than one barrel

A multiple-barrel firearm is any type of firearm with more than one gun barrel, usually to increase the rate of fire or hit probability and to reduce barrel erosion or overheating.

Recoil operation is an operating mechanism used to implement locked-breech autoloading firearms. Recoil operated firearms use the energy of recoil to cycle the action, as opposed to gas operation or blowback operation using the pressure of the propellant gas.

In firearms and artillery, the primer is the chemical and/or device responsible for initiating the propellant combustion that will propel the projectiles out of the gun barrel.

<span class="mw-page-title-main">Repeating firearm</span> Firearms that can be discharged multiple times after a single ammunition reload

A repeating firearm or repeater is any firearm that is capable of being fired repeatedly before having to be manually reloaded with new ammunition into the firearm.

References

  1. Burgoyne, John W. (2002). The Queen Anne Pistol 1660–1780. Museum Restoration Service. See pages 17–19
  2. Queen Anne Flintlock Carbine by Henry Delaney, Circa 1720
  3. Weiland, Terry (2008). Vintage British Shotguns: A Shooting Sportsman Guide. Down East Books. pp. 93–101. ISBN   9780892728435.
  4. 1 2 3 Kinard, Jeff (2003). Pistols:An Illustrated History of Their Impact. ABC-CLIO. p. 34. ISBN   978-1-851094-70-7.
  5. Silver Clad Queen Anne Pistols
  6. Miller, Martin (1978). The Collector's Illustrated Guide to Firearms. Mayflower Books. pp. 59, 95 & 101. ISBN   9780831700133.

Further reading

See also