Raceair Skylite

Last updated

Skylite
RaceairSkylite.jpg
Skylite
Role Ultralight aircraft
National origin United States
Manufacturer Raceair Designs
Wings Of Freedom
DesignerEd Fisher
Introduction1991
StatusProduction completed (2019)
Number built26 (1998)

The Raceair Skylite is an American ultralight aircraft that was designed by Ed Fisher and made available in the form of plans for amateur construction, by Raceair Designs. [1] [2]

Contents

The Skylite design was started in 1988 and the completed aircraft was first shown at Oshkosh in 1991. [2]

It was also sold by Wings of Freedom, but by late 2019 the company website had been taken down and it is likely that production had ended. [3]

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 240 lb (109 kg). It features a strut-braced high wing, a single-seat, open cockpit, conventional landing gear and a single engine in tractor configuration. The design is intended to resemble the high-wing air racers of the 1930s. [1] [2]

The Skylite is constructed with a welded 4130 steel tube fuselage, with the wings built from riveted and gussetted aluminum tubing. The wing ribs are made from angled aluminum and have an 18 in (46 cm) spacing between them. All surfaces are covered in 1.6 oz aircraft fabric finished with latex. Its 29.1 ft (8.9 m) span wing is supported by "V" lift struts and jury struts and features full-span ailerons. The vertical stabilizer is highly swept back. The pilot is accommodated in a semi-enclosed cockpit with a windshield. The specified engine was the Rotax 277 of 28 hp (21 kW), but being plans-built other powerplants were also used. [1] [2]

Due to its plans-built construction and complex design, only a small number of aircraft were completed before the plans were initially taken off the market. Today plans and kits are again available from Wings Of Freedom of Hubbard, Ohio as well as the newly resurrected Raceair Designs. Construction time is estimated as 750 hours. [1] [2] [4] [5]

Operational history

The design won Grand Champion Ultralight at AirVenture in 1991. [6]

By 1998 the company reported that 300 kits and plans had been sold and 26 aircraft were completed and flying. [6]

Specifications (Skylite)

Data from Cliche and the Virtual Ultralight Museum [1] [2]

General characteristics

Performance

Related Research Articles

Spectrum Beaver

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Chotia Gypsy is an American single engine, high-wing, conventional landing gear-equipped ultralight aircraft that was designed by John Chotia in 1980.

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.

Fisher FP-404 Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

Phantom X1

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

Carlson Sparrow

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

Aerotique Parasol American ultralight aircraft

The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only.

The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.

The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.

The Ritz Model A is an American ultralight aircraft that was designed by Gerry Ritz in 1984 and supplied in the form of plans for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

The North Wing Apache is an American two-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

Freedom Lite SS-11 Skywatch Canadian ultralight aircraft

The Freedom Lite SS-11 Skywatch is a Canadian ultralight aircraft that was produced by Freedom Lite of Walton, Ontario and later by Legend Lite of New Hamburg, Ontario, introduced in 1996. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft, or as a kit for amateur construction.

Affordaplane American ultralight aircraft

The Affordaplane is an American plans-built, high wing, strut-braced, single engine, tractor configuration, conventional landing gear equipped ultralight aircraft for the US FAR 103 Ultralight Vehicles rules. Designed by Dave Edwards, it is intended for amateur construction. The aircraft plans claim it can be built out of readily sourced and inexpensive materials using common tools in 150 to 250 hours construction time.

References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-35. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 4 5 6 Virtual Ultralight Museum (n.d.). "Skylite" . Retrieved December 11, 2011.
  3. ↑ Wings of Freedom. "Wings of Freedom". www.wingsoffreedomaviation.com. Retrieved March 6, 2020.
  4. ↑ Wings Of Freedom (2010). "What We're About". Archived from the original on February 20, 2013. Retrieved November 17, 2012.
  5. ↑ Raceair Designs (n.d.). "Raceair Designs" . Retrieved December 27, 2014.
  6. 1 2 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 231. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.