Radford and Timsbury Halt railway station

Last updated

Radford and Timsbury Halt
General information
Location Radford, Somerset
England
Coordinates 51°19′08″N2°28′15″W / 51.3188°N 2.4709°W / 51.3188; -2.4709
Platforms1
Other information
StatusDisused
History
Original company Great Western Railway
Key dates
1910Opened
1915Closed
1923Reopened
1925Closed

Radford and Timsbury Halt railway station was on the Camerton branch of the Great Western Railway in Somerset, England. It was in use from 1910 until 1915, and again from 1923 until 1925.

Contents

History

The Bristol and North Somerset Railway (B&NSR) opened a branch line from Hallatrow to Camerton on 1 March 1882, although it had been funded by the Great Western Railway (GWR) which worked the trains on the line from the outset and purchased the B&NSR Company in 1884. [1] The line was extended from Camerton to Limpley Stoke in 1910 where it made a connection with the GWR's Wilts, Somerset and Weymouth Line. [2]

When the line opened were no stations between Hallatrow and Camerton. In 1899 the Timsbury Colliery Company signed an agreement with the GWR for a siding at Radford. The GWR siding was opened for traffic on 19 July 1900 and the line connecting it to the colliery came into use in October that year. [3] Radford and Timsbury Halt opened for passenger trains on 9 May 1910, the same day as the line was extended through to Limpley Stoke. [4] The term 'halt' was used by the GWR to denote railway stations without staff or public goods facilities.

Passenger services on the line were withdrawn on 22 March 1915 due to World War I. They were eventually restored on 9 July 1923, four and a half years after hostilities had ceased. They did not last long as they were withdrawn again on 21 September 1925, never to be resumed. [5] Freight trains continued to operate until 8 February 1932 and the track was lifted shortly afterwards. [6]

Description

The station was 2.85 miles (4.59 km) from Hallatrow and just 0.58 miles (0.93 km) from Camerton. The timber-built platform was situated on the south side of the line. It was 150 feet (46 m) long, 8 feet (2.4 m) wide, and provided with oil lamps and a corrugated iron shelter. Access was by a footpath from the road bridge that crossed the line at the east end of the station. [4]

No public goods facilities were provided, but a loop siding on the north side of the line immediately to the west of the passenger platform was connected at its east end to a 300 yards (270 m) cable-worked incline up to the colliery. Loaded wagons coming down provided the power to haul empties back up to the colliery. [3]

Services

Passenger trains on the Hallatrow to Limpley Stoke line were operated by steam railmotors or, later, by auto trains. In 1914 there were five trains each day, Monday to Saturday only. In 1923 this had been reduced to four. [7]

Preceding station Historical railways Following station
Paulton Halt   Great Western Railway
Camerton branch
  Camerton (Somerset)

Related Research Articles

<span class="mw-page-title-main">Cholsey and Wallingford Railway</span>

The Cholsey and Wallingford Railway is a 2+12-mile (4 km) long standard gauge heritage railway in the English county of Oxfordshire. It operates along most of the length of the former Wallingford branch of the Great Western Railway (GWR), from Cholsey station, 12 miles (19 km) north of Reading on the Great Western Main Line, to a station on the outskirts of the nearby town of Wallingford.

<span class="mw-page-title-main">Somerset Coal Canal</span> Canal in Somerset, England

The Somerset Coal Canal was a narrow canal in England, built around 1800. Its route began in basins at Paulton and Timsbury, ran to nearby Camerton, over two aqueducts at Dunkerton, through a tunnel at Combe Hay, then via Midford and Monkton Combe to Limpley Stoke where it joined the Kennet and Avon Canal. This link gave the Somerset coalfield access east toward London. The longest arm was 10.6 miles (17.1 km) long with 23 locks. From Midford an arm also ran via Writhlington to Radstock, with a tunnel at Wellow.

<span class="mw-page-title-main">Midford</span> Human settlement in England

Midford is a village approximately 3 miles (5 km) south-south-east of Bath, Somerset, England. Although relatively small, it extends over 2 counties, is part of two unitary authorities and is part of five parishes. Although all five parishes extend very near to the village centre, most of the residents reside in the parish of Southstoke and are part of the Bath and North East Somerset unitary authority.

<span class="mw-page-title-main">Bridgwater railway station</span> Railway station in Somerset, England

Bridgwater railway station serves the town of Bridgwater in Somerset, England. It is on the Bristol to Taunton Line and is operated by Great Western Railway. It is 151 miles 47 chains from the zero point at London Paddington via Box.

<span class="mw-page-title-main">Limpley Stoke</span> Human settlement in England

Limpley Stoke is a village and civil parish in Wiltshire, England. It lies in the Avon valley between Bath and Freshford, and is both above and below the A36 road.

<span class="mw-page-title-main">Sandplace railway station</span> Railway station in Cornwall, England

Sandplace railway station is an intermediate station on the scenic Looe Valley Line in Cornwall, England, United Kingdom. The station serves the hamlet of Sandplace and is 6.5 miles (10 km) south of Liskeard.

The Wilts, Somerset and Weymouth Railway (WS&WR) was an early railway company in south-western England. It obtained Parliamentary powers in 1845 to build a railway from near Chippenham in Wiltshire, southward to Salisbury and Weymouth in Dorset. It opened the first part of the network but found it impossible to raise further money and sold its line to the Great Western Railway (GWR) in 1850.

The Bristol and North Somerset Railway was a railway line in the West of England that connected Bristol with Radstock, through Pensford and further into northern Somerset, to allow access to the Somerset Coalfield. The line ran almost due south from Bristol and was 16 miles (26 km) long.

<span class="mw-page-title-main">Moorswater railway station</span> Former railway station in England

Moorswater railway station was the centre of operations for the Liskeard and Caradon Railway and the Liskeard and Looe Railway. The two railways made an end on junction here. It was the site of the lines' engine shed, also a china clay works which is now used as a cement terminal.

Abingdon Junction railway station was a junction station for the branch line to Abingdon. It was opened by the Abingdon Railway Company on 2 June 1856 along with the branch, and was subsequently closed and replaced by Radley railway station on 8 September 1873. Radley station was in a more convenient place for access. At the same time as the station's opening, the next station to the south, formerly known as Abingdon Road was renamed Culham.

<span class="mw-page-title-main">Abingdon railway station</span> Disused railway station in Oxfordshire, England

Abingdon railway station was a station which served the town of Abingdon in Oxfordshire, England until 1963.

<span class="mw-page-title-main">Compton railway station</span> Former railway station in England

Compton railway station was a station on the Didcot, Newbury and Southampton Railway in England. Compton was the largest station between Newbury, Berkshire and Didcot, Oxfordshire, serving the villages of Compton, East Ilsley and Aldworth. The station closed in 1962.

<span class="mw-page-title-main">Wisbech East railway station</span> Former railway station in Cambridgeshire, England

Wisbech East was a railway station in Wisbech, Cambridgeshire. It was opened in 1848 and became part of the Great Eastern Railway network, providing connections to March, Watlington and St Ives, as well as Upwell via the Wisbech and Upwell Tramway. The station closed in 1968 and no trace of it remains today. A freight-only line remains extant as far as a factory based in the station's former goods yard, and a heritage railway based in March is aiming to reinstate services to Wisbech and construct a new station as near as possible to Newbridge Lane crossing.

<span class="mw-page-title-main">Forest of Dean Railway</span> Disused railway in England

The Forest of Dean Railway was a railway company operating in Gloucestershire, England. It was formed in 1826 when the moribund Bullo Pill Railway and a connected private railway failed, and they were purchased by the new company. At this stage it was a horse-drawn plateway, charging a toll for private hauliers to use it with horse traction. The traffic was chiefly minerals from the Forest of Dean, in the Whimsey and Churchway areas, near modern-day Cinderford, for onward conveyance from Bullo Pill at first, and later by the Great Western Railway.

<span class="mw-page-title-main">Bristol–Exeter line</span> Railway line in England

The Bristol to Exeter line is a major branch of the Great Western Main Line in the West of England and runs from Bristol, to Exeter, from where it continues as the Exeter to Plymouth line. It was one of the principal routes of the pre-1948 Great Western Railway which were subsequently taken over by the Western Region of British Railways and are now part of the Network Rail system.

Paulton Halt railway station was on the Camerton branch of the Great Western Railway in Somerset, England. It was in use from 1914 until 1925, however it was closed for 8½ of these 12 years due to World War I.

<span class="mw-page-title-main">Cinderford New railway station</span> Former railway station in England

Cinderford New railway station was a disused railway station that was opened by the former Severn and Wye Railway to serve the mining town of Cinderford.

<span class="mw-page-title-main">Monkton Combe Halt railway station</span> Former railway station in England

Monkton Combe Halt railway station was a railway station in Monkton Combe, Somerset, England. It was built by the Great Western Railway in 1910, on the Camerton branch of the Bristol and North Somerset Railway line.

<span class="mw-page-title-main">Wallingford railway branch line</span>

The Wallingford railway branch line was a 2.5 mi (4.0 km) branch line between the market town of Wallingford and the Great Western Railway main line at Wallingford Road in Oxfordshire. The railway, which opened in 1866, was originally planned to go a further 6 mi (9.7 km) to Watlington but this was never completed because of insufficient funds. Instead Watlington was reached by a 9 mi (14 km) line completed by the Watlington and Princes Risborough Railway company in 1872. After the Wallingford branch line opened, it ran regular passenger shuttle services to the GWR mainline for almost a century. It closed to passengers in 1959; the line escaped the Beeching Axe, remaining open for goods services until 1981.

<span class="mw-page-title-main">Camerton railway station (Somerset)</span> Disused railway station in Camerton, Somerset

Camerton (Somerset) railway station served the village of Camerton, England from 1882 to 1951 on the Bristol and North Somerset Railway. In common with the other stations on the line it had a single platform for passengers, but also had a loop line so that two trains could pass. Diverging away from the through line at the east end of the station was the access line and associated sidings belonging to Camerton colliery. There was a substantial station building on the platform - this originally had a canopy but this was removed after passenger services ceased.

References

  1. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 11–14. ISBN   0-906867-25-8.
  2. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. p. 30.
  3. 1 2 Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 45–46. ISBN   0-906867-25-8.
  4. 1 2 Oakley, Mike (2006). Somerset Railway Stations. Bristol: Redcliffe Press. p. 102. ISBN   1-904537-54-5.
  5. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 32–33.
  6. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. p. 101. ISBN   0-906867-25-8.
  7. Maggs, Colin G.; Beale, Gerry (1985). The Camerton Branch. Upper Bucklebury: Wild Swan Publications. pp. 107–108.