The Randmeer is a medium size sailing boat designed by E. G. van de Stadt. In the Netherlands it is often used for One-Design sailing races. Developed in the 1960s it was made especially for sailing on the so-called randmeren ; narrow shallow lakes that surround the newly created Flevopolders. This makes the boat perfect for rough but shallow waters.
The Randmeer is 6.50 meters long and 2.10 meters wide. The hull weighs 500 kilograms. The draft can vary, depending on whether it has a centreboard, between 0.55 and 1.15 meters. The mainsail has a surface area of 11.4 m2, the jib has a surface area of 7.7 m2. The 'Touring' type has a jib of 5.6 m2. In addition it can be sailed with a spinnaker of 19.5 m2. All boats are produced at the shipyard in Heeg, Friesland, The Netherlands.
Within the Randmeer class there are three types: the Classic; the Advance; and the Touring. The Classic, as can inferred from the name, is the original design that dates back to 1964. The Classic has a kielmidzwaard, a combination of a not-too-long keel with a retractable centreboard inside it. This means that its draft can vary between 0.55 and 1.15 meters.
The most obvious difference between the Classic and the Advance is that the Advance cabin floor is higher. Due to this shallower cabin the Advance is completely self-baling. Moreover, except for the rudder, all wood has disappeared from the design. Similar to the Classic the Advance has a kielmidzwaard.
The Touring type is made for recreational use only. The hull is almost the same as the Advance, but it has a fixed keel, with a total draft of 0.75 meters. In addition, this ship has a pierced rudder; i.e. it goes through the hull instead of being hung behind it. This means that the Touring type does not comply with the One-Class design.
Van de Stadt also designed a version with a cabin: the Trotter. This has later been developed into the Trotter Pandora, often built in England.
A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture.
A daggerboard is a retractable centreboard used by various sailing craft. While other types of centreboard may pivot to retract, a daggerboard slides in a casing. The shape of the daggerboard converts the forward motion into a windward lift, countering the leeward push of the sail. The theoretical centre of lateral resistance is on the trailing edge of the daggerboard.
A centreboard or centerboard (US) is a retractable hull appendage which pivots out of a slot in the hull of a sailboat, known as a centreboard trunk (UK) or centerboard case (US). The retractability allows the centreboard to be raised to operate in shallow waters, to move the centre of lateral resistance, to reduce drag when the full area of the centreboard is not needed, or when removing the boat from the water, as when trailering. A centreboard which consists of solely a pivoting metal plate is called a centerplate. A daggerboard is similar but slides vertically rather than pivoting.
Sharpies are a type of hard chined sailboat with a flat bottom, extremely shallow draft, centreboards and straight, flaring sides. They are believed to have originated in the New Haven, Connecticut region of Long Island Sound, United States. They were traditional fishing boats used for oystering, and later appeared in other areas. With centerboards and shallow balanced rudders they are well suited to sailing in shallow tidal waters.
The Hunter 23 is an American trailerable sailboat, that was designed by Hunter Marine and first built in 1985.
The Swan 40 Frers, also referred to as the Swan 40-2, is a Finnish sailboat that was designed by Germán Frers as a cruiser-racer and first built in 1992.
The Swan 54 is a Finnish sailboat that was designed by Germán Frers as a blue water cruiser and first built in 2015. The interior was designed by Heini Gustafsson.
The CS 22 is a Canadian trailerable sailboat, that was designed by John A. Butler and first built in 1971. The design is out of production.
The Bluejacket 23 is a 23-foot (7.0 m) Canadian trailerable, fibreglass monohull sailboat designed by Cuthbertson & Cassian as a day sailer and club racer and first built in 1967.
The C&C 40 is a series of Canadian sailboats, that were all designed by C&C Design and first built in 1968.
The Mariner 19 is an American trailerable sailboat, that was designed by Philip Rhodes and first built in 1962.
The Dufour 1800 is a French sailboat that was designed by Laurent Cordelle and Michel Dufour as a trailerable cruiser-racer and first built in 1979.
The Bristol 40 is an American sailboat that was designed by Ted Hood as a racer-cruiser and first built in 1970.
The Bristol Caravel 22, sometimes called the Bristol 22 Caravel, Sailstar Caravel, or just the Caravel 22, is an American trailerable sailboat that was designed by Halsey Chase Herreshoff as a cruiser and first built in 1968. It is named for the class of sailing ship.
The Cornish Crabber 24 is a series of British trailerable sailboats, designed by Roger Dongray as cruisers and first built in 1974.
The Dehler 25 is a German trailerable sailboat that was designed by E. G. van de Stadt as a cruiser and first built in 1984.
The Freedom 24 is an American trailerable sailboat that was designed by William H. Tripp, III as a racer-cruiser and first built in 1994.
The Menger Oysterman 23 is an American trailerable skipjack that was designed by Bill Menger as a daysailer and cruiser and first built in 1977.
The S2 6.8 is an American trailerable sailboat that was designed by Don Wennersten and Arthur Edmunds as a racer-cruiser and first built in 1976. The designation indicates the approximate length overall in meters.
The Seaward 23 is an American trailerable sailboat that was designed by Nick Hake as a pocket cruiser and first built in 1984.