S-7 Courier | |
---|---|
Role | Kit aircraft |
National origin | United States |
Manufacturer | Rans Inc |
Designer | Randy Schlitter |
First flight | November 1985 |
Status | In production (2017) |
Number built | 600 (2011) |
Developed from | Rans S-5 Coyote Rans S-4 Coyote |
The Rans S-7 Courier is an American single-engined, tractor configuration, two-seats in tandem, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Courier is available in kit form for amateur construction or as a completed light-sport aircraft. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
The S-7 was originally conceived of as a trainer for the single seat S-4 Coyote. First flown in November 1985 the Courier was named for an aircraft that Schlitter admired, the Helio Courier. [3] [4] [6] [8] [10]
The S-7 features a welded 4130 steel tube cockpit, with a bolted aluminum tube rear fuselage, wing and tail surfaces all covered in dope and fabric. The reported construction times for the Courier are 500-700 man-hours. [1] [2] [4]
The Courier is available only with conventional landing gear but can be equipped with floats and skis. The original basic engine was the Rotax 503 of 50 hp (37 kW), with the Rotax 582 of 64 hp (48 kW) being available as an option. Today the standard engine is the 100 hp (75 kW) Rotax 912ULS. [1] [2] [3] [4] At least one S7 has been fitted with a Jabiru 2200 flat-four, four-stroke direct-drive engine. [11]
325 examples of the Courier had been completed by December 2007. [2] In November 2010 74 were on the registers of European countries west of Russia. [12]
Reviewer Marino Boric said in a 2015 review, that, "this refined little fun flyer...continues to prove itself deservedly popular." [13]
In an extensive review in December 2020, AVweb writer Dave Prizio praised the design's ergonomics and economics, "a nice feature of the S-7 is its ample 30-inch-wide cabin. Even for large people, there is no need to squeeze into an S-7 the way you might into a Cub. It will pretty much do the same thing as a Super Cub at a lower operating cost." [14]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.
The Zenith STOL CH 701 and CH 750 are a family of light, two-place kit-built STOL aircraft designed by Canadian aeronautical engineer Chris Heintz through his Midland, Ontario, based company, Zenair. The CH 701 first flew in 1986 and the design is still in production. The CH 750 was first introduced in 2008. The CH 701 was later developed into the four-place Zenith STOL CH 801.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.
The Rans S-16 Shekari is an American single-engined, two-seat, low-wing, aerobatic monoplane designed by Randy Schlitter, built by Rans Inc and sold as a kit for amateur construction.
The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.
The Rans S-4 Coyote and Rans S-5 Coyote are a family of American single-engined, tractor configuration, single-seat, high-wing monoplanes designed by Randy Schlitter and manufactured by Aero-Max and later by Rans Inc. The Coyote was available in kit form for amateur construction as an ultralight aircraft or amateur-built aircraft.
The Rans S-9 Chaos is an American single-engined, tractor configuration, single-seat, mid-wing monoplane designed by Randy Schlitter for aerobatics and manufactured by Rans Inc. The Chaos is available in kit form for amateur construction.
The Rans S-10 Sakota is an American single-engined, tractor configuration, two-seats in side-by-side configuration, mid-wing monoplane designed by Randy Schlitter for aerobatics and manufactured by Rans Inc. The Sakota is available in kit form for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rans S-19 Venterra is an American single-engined, tractor configuration, two-seats in side-by-side configuration, low-wing monoplane designed by Randy Schlitter as a light-sport aircraft and manufactured by Rans Inc. The Venterra is available as a complete factory-built aircraft and in kit form for amateur construction.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Bushcaddy R-80 is a Canadian ultralight and light-sport aircraft that was designed by Jean Eudes Potvin of Lac Saint-Jean, Quebec in 1994 and produced by his company Club Aeronautique Delisle Incorporated (CADI). It was later built by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec.
The Norman Aviation Nordic 8 Mini Explorer is a Canadian ultralight aircraft, designed and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft is supplied as a kit for amateur construction.
The Slepcev Storch is a Serbian type-certified, kit and ultralight STOL aircraft, designed by Yugoslavian-Australian Nestor Slepcev and currently produced by Storch Aircraft Serbia in several different versions. The ultralight version is a 3/4 scale replica of the Fieseler Fi 156 Storch of the Second World War and is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.