Regressive discrete Fourier series

In applied mathematics, the regressive discrete Fourier series (RDFS) is a generalization of the discrete Fourier transform where the Fourier series coefficients are computed in a least squares sense and the period is arbitrary, i.e., not necessarily equal to the length of the data. It was first proposed by Arruda (1992a, 1992b). It can be used to smooth data in one or more dimensions and to compute derivatives from the smoothed curve, surface, or hypersurface.

Technique

One-dimensional regressive discrete Fourier series

The one-dimensional RDFS proposed by Arruda (1992a) can be formulated in a very straightforward way. Given a sampled data vector (signal) ${\displaystyle x_{n}=x(t_{n})}$, one can write the algebraic expression:

${\displaystyle x_{n}=\sum _{k=-q}^{q}X_{k}e^{\frac {-i2\pi kt_{n}}{T}}+\varepsilon _{n},t_{n}{\text{ arbitrary }},\quad n=1,\dots ,N.\,}$

Typically ${\displaystyle t_{n}=n\,\Delta t}$, but this is not necessary.

The above equation can be written in matrix form as

${\displaystyle WX=x+\varepsilon .\,}$

The least squares solution of the above linear system of equations can be written as:

${\displaystyle {\hat {X}}=(W^{H}W)^{-1}W^{H}x\,}$

where ${\displaystyle X^{H}}$ is the conjugate transpose of ${\displaystyle X}$, and the smoothed signal is obtained from:

${\displaystyle {\hat {x}}=W{\hat {X}}\,}$

The first derivative of the smoothed signal ${\displaystyle {\hat {x}}}$ can be obtained from:

${\displaystyle {\frac {dx}{dt}}(t_{n})=\sum _{k=-q}^{q}{\frac {-i2\pi k}{T}}X_{k}e^{\frac {-i2\pi kt_{n}}{T}},\quad n=1,\dots ,N.\,}$

Two-dimensional regressive discrete Fourier series (RDFS)

The two-dimensional, or bidimensional RDFS proposed by Arruda (1992b) can also be formulated in a straightforward way. Here the equally spaced data case will be treated for the sake of simplicity. The general non-equally-spaced and arbitrary grid cases are given in the reference (Arruda, 1992b). Given a sampled data matrix (bi dimensional signal) ${\displaystyle x_{mn}=x(\xi _{m},\nu _{n}),m=1,\dots ,M;\ n=1,\dots ,N;}$ one can write the algebraic expression:

${\displaystyle x_{mn}=\sum _{k=-p}^{p}\sum _{l=-q}^{q}X_{kl}e^{\frac {-i2\pi k\xi _{m}}{L_{\xi }}}e^{\frac {-i2\pi l\nu _{n}}{L_{\nu }}}+\varepsilon _{mn},\quad m=1,\dots ,M;\ n=1,\dots ,N.\,}$

The above equation can be written in matrix form for a rectangular grid. For the equally spaced sampling case :${\displaystyle \xi _{m}=m\Delta \xi ,\nu _{n}=n\Delta \nu \,}$ we have:

${\displaystyle x_{mn}=\sum _{k=-p}^{p}\sum _{l=-q}^{q}X_{kl}e^{\frac {-i2\pi km\Delta \xi }{L_{\xi }}}e^{\frac {-i2\pi ln\Delta \nu }{L_{\nu }}}+\epsilon _{mn},\quad m=1,\dots ,M;\ n=1,\dots ,N.\,}$

The least squares solution may be shown to be:

${\displaystyle {\hat {X}}=(W_{L_{\xi }}^{H}W_{L_{\xi }})^{-1}W_{L_{\xi }}^{H}xW_{L_{\nu }}^{*}(W_{L_{\nu }}W_{L_{\nu }}^{H})^{-1}\,}$

and the smoothed bidimensional surface is given by:

${\displaystyle {\hat {x}}=W_{L_{\xi }}{\hat {X}}W_{L_{\nu }}^{t}\,}$

where ${\displaystyle X^{H}}$ is the conjugate, and ${\displaystyle X^{t}}$ is the transpose of ${\displaystyle X}$.

Differentiation with respect to ${\displaystyle \xi {\text{ and }}\nu }$ can be easily implemented analogously to the one-dimensional case (Arruda, 1992b).

Current applications

• Spatially dense data condensation applications: Arruda, J.R.F. [1993] applied the RDFS to condense spatially dense spatial measurements made with a laser Doppler vibrometer prior to applying modal analysis parameter estimation methods. More recently, Vanherzeele et al. (2006, 2008a) proposed a generalized and an optimized RDFS for the same kind of application. A review of optical measurement processing using the RDFS was published by Vanherzeele et al. (2009).
• Spatial derivative applications: Batista et al. [2009] applied RDFS to obtain spatial derivatives of bi dimensional measured vibration data to identify material properties from transverse modes of rectangular plates.
• SHM applications: Vanherzeele et al. [2009] applied a generalized version of the RDFS to tomography reconstruction.

Software

Recently, a package that includes one and two-dimensional RDFS was developed in order to make easier its use in the free and open source software R:

• A R package for RDFS at Github

See also

• Discrete Fourier transform
• Fourier series

References

• Arruda, J.R.F., 1992a: Analysis of non-equally spaced data using a Regressive discrete Fourier series. Journal of Sound and Vibration, 156(3), 571–574.
• Arruda, J.R.F., 1992b: Surface smoothing and partial spatial derivatives using a regressive discrete Fourier series. Mechanical Systems and Signal Processing, 6(1), 41–50.
• Arruda, J.R.F., 1993: Spatial domain modal analysis of lightly-damped structures using laser velocimeters. Journal of Vibration and Acoustics, 115, 225–231.
• Batista, F.B., Albuquerque, E.L., Arruda, J.R.F., Dias Jr., M., 2009: Identification of the bending stiffness of symmetric laminates using regressive discrete Fourier series and finite differences. Journal of Sound and Vibration, 320, 793–807.
• Vanherzeele, J., Guillaume, P., Vanlanduit, S., Verboten, P., 2006: Data reduction using a generalized regressive discrete Fourier series, Journal of Sound and Vibration, 298, 1–11.
• Vanherzeele, J., Vanlanduit, S., Guillaume, P., 2008a: Reducing spatial data using an optimized regressive discrete Fourier series, Journal of Sound and Vibration, 309, 858–867.
• Vanherzeele, J., Longo, R., Vanlanduit, S., Guillaume, P., 2008b: Tomographic reconstruction using a generalized regressive discrete Fourier series, Mechanical Systems and Signal Processing, 22, 1237–1247.
• Vanherzeele, J., Vanlanduit, S., Guillaume, P., 2009: Processing optical measurements using a regressive discrete Fourier series, Optical and lasers in engineering, 47, 461–472.