Richard Dixon (USCG)

Richard Dixon
Richard Dixon
	USCG motor lifeboat coxswain Richard Dixon
Allegiance	United States of America
Service/branch	United States Coast Guard
Rank	Senior Chief Petty Officer
Awards	Coast Guard Medal (x2)

Last updated November 20, 2023

Richard Dixon was the coxswain of a 44-foot Motor Lifeboat, on the July 4th weekend of 1980, when his skill and daring enabled him to rescue stricken pleasure boat crew off Tillamook Bay, Oregon.^[1]^[2]^[3] During the first incident a 58-foot yacht was in distress in the aftermath of hurricane Celia,^[4] and needed to seek sheltered waters, but wave conditions seemed likely to batter it apart if it tried to use the narrow entrance between two stone jetties to enter Tillamook Bay's harbor. Dixon and the coxswain of another motor lifeboat maneuvered beside the yacht, to absorb some of the wave energy as it entered harbor.

Coast Guard Medal citation (first award)

The President of the United States of America takes pleasure in presenting the Coast Guard Medal to Boatswain's Mate First Class Richard D. Dixon, United States Coast Guard, for heroism on the afternoon of 3 July 1980 while serving as the coxswain of Coast Guard Motor Lifeboat (MLB) 44409. During this period he was instrumental in preventing the yacht FANTASY ISLE, with five people onboard, from capsizing on the stormy Tillamook Bay entrance bar. To escape the remains of Tropical Storm CELIA, the owner/operator of FANTASY ISLE elected to seek shelter in Tillamook Bay, Oregon. Arriving outside the Bay in the late afternoon, the bar entrance was completely covered with breaking seas up to 30-feet in height. With the crew of FANTASY ISLE completely exhausted and seasick, the owner/operator believed he was in a "do-or-die" situation and informed Coast Guard Station Tillamook Bay that he was going to cross the bar. Two Coast Guard rescue boats were immediately dispatched to escort the yacht across the Bar. Arriving on scene two miles off-shore, Petty Officer Dixon placed his MLB behind FANTASY ISLE and took the first breaking wave broadside thereby taking the full force of the breaker before it could reach the yacht. Petty Officer Dixon continued this highly dangerous procedure, taking breaker after breaker, for the next forty minutes until FANTASY ISLE was safely inside Tillamook Bay. Petty Officer Dixon demonstrated remarkable initiative, exceptional fortitude and daring in spite of imminent personal danger during this incident. His unselfish actions, courage and unwavering devotion to duty reflect the highest credit upon himself and the United States Coast Guard.

Coast Guard Medal citation (second award)

The President of the United States of America takes pleasure in presenting a Gold Star in lieu of a Second Award of the Coast Guard Medal to Boatswain's Mate First Class Richard D. Dixon, United States Coast Guard, for extraordinary heroism on the morning of 4 July 1980 while serving as coxswain of MLB 44409 from Coast Guard Station Tillamook Bay, Oregon. During this period he was instrumental in the rescue of four men from a cap-sized small pleasure craft in turbulent surf in the entrance to Tillamook Bay. The boat had dashed around the tip of the north entrance jetty, directly into the path of a 16 to 18 foot breaking sea. The boat capsized. Two of the four occupants were hurled through the windshield before being thrown into the turbulent sea. MLB 44409, on station as a safety boat during an escort operation, was in position one mile behind the capsized boat and was directed to attempt to make the pickup. Petty Officer Dixon skillfully maneuvered the MLB alongside the capsized boat, which resulted in the bow of the MLB being less than 50 to 60 feet from the rocks of the jetty with the stern facing into the breakers. Demonstrating exceptional seamanship, Petty Officer Dixon maintained this position, despite the pounding surf, until all four people were safely aboard the MLB. The slightest mistake in the 12 to 15 foot breakers would have caused the MLB to be tossed unmercifully upon the treacherous rocks with the resultant death to his crew and the victims of the capsized boat. Petty Officer Dixon demonstrated remarkable initiative, exceptional fortitude and daring in spite of imminent personal danger during this rescue mission. His unselfish actions, courage and unwavering devotion to duty reflect the highest credit upon himself and the United States Coast Guard.^[5]

USCGC Richard Dixon

In 2010 when the Coast Guard decided that all the new Sentinel class cutters would be named after Coast Guard personnel who had been recognized for their heroism Dixon was one of those to be honored.^[6]^[7] The thirteenth cutter in the class was named USCGC Richard Dixon.^[2] She was the first Sentinel class cutter to be homeported in Puerto Rico.^[8]^[9]

Related Research Articles

<span class="mw-page-title-main">Tillamook Bay</span> Bay in Oregon, USA

Tillamook Bay is a small inlet of the Pacific Ocean, approximately 6 mi (10 km) long and 2 mi (3 km) wide, on the northwest coast of the U.S. state of Oregon. It is located just north of Cape Meares in western Tillamook County approximately 75 mi (120 km) west of Portland.

Charles W. Sexton, Machinery Technician First Class, USCG, was awarded a posthumous award of the Coast Guard Medal for "extraordinary heroism."

Edgar A. Culbertson was a United States Coast Guard Boatswain's Mate First Class (BM1) who died while trying to rescue three teenage brothers during a fierce storm in Duluth, Minnesota.

A rescue lifeboat is a boat rescue craft which is used to attend a vessel in distress, or its survivors, to rescue crew and passengers. It can be hand pulled, sail powered or powered by an engine. Lifeboats may be rigid, inflatable or rigid-inflatable combination-hulled vessels.

The 44-foot motor lifeboat was the standard workhorse of the United States Coast Guard (USCG) rescue boat fleet. The 44′ MLB has been replaced by the 47′ MLB. The boats are powered by twin diesel engines, each powering a separate propeller. The propellers are protected by the hull to help prevent them being damaged if the boat runs aground. The boats have air-tight compartments forward and aft of the steering station. The aft compartment is designed to hold litters to strap in injured people, while the forward compartment holds uninjured rescued.

USCGC Bernard C. Webber (WPC-1101) is the first of the United States Coast Guard's 58 Sentinel-class cutters. Like most of her sister ships, she replaced a 110-foot (34 m) Island-class patrol boat. Bernard C. Webber, and the next five vessels in the class, Richard Etheridge, William Flores, Robert Yered, Margaret Norvell, and Paul Clark, are all based in Miami, Florida.

Coast Guard Station Tillamook Bay is an active duty installation of the United States Coast Guard located in Garibaldi, Oregon, as well as a nationally recognized historic site. A station has been operating in Tillamook Bay since 1908. The station was opened by the United States Life-saving Service a precursor agency to the Coast Guard. The current station has been in continuous operation since 1942.

Bernard Challen Webber was a United States Coast Guardsman. He was a petty officer assigned to Coast Guard Station Chatham, Massachusetts, where one of his duties was that of coxswain of Coast Guard Motor Lifeboat CG 36500. Webber and his crew of three rescued the crew of the stricken T2 tanker SS Pendleton, which had broken in half during a storm on February 18, 1952 off Cape Cod. Webber maneuvered the 36-foot lifeboat under Pendleton's stern as the tanker's crew, trapped in the stern section, abandoned the wreck of their ship on a Jacob's ladder into the Coast Guard motor lifeboat.

USCGC Richard Dixon is the United States Coast Guard's thirteenth Sentinel-class cutter, commissioned in Tampa, Florida, on June 20, 2015. She arrived in her home port of San Juan, Puerto Rico on June 24, 2015.

<span class="mw-page-title-main">Richard H. Patterson</span>

Richard H. Patterson was a chief petty officer in the United States Coast Guard, decorated for saving the crew of his vessel, USCGC Point Welcome after the skipper and executive officer became casualties during a 1966 friendly fire attack, in Vietnam.

USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.

USCGC Forrest Rednour (WPC-1129) is the 29th Sentinel-class cutter built for the United States Coast Guard. She is the first of the four vessels of her class to be home-ported in San Pedro, California. Other sister ships have been based in Florida, Mississippi, Puerto Rico, New Jersey, North Carolina, Hawaii and Alaska. But Forrest Rednour is the first to be homeported on the west coast of the lower 48 states. The vessel will be homeported at a base near Los Angeles' Terminal Island. Three sister ships will join her, at this base.

USCGC Robert Ward (WPC-1130) is the 30th Sentinel-class cutter, and the second of four assigned to the U.S. Coast Guard Base Los Angeles / Long Beach, in Los Angeles, California.

John F. McCormick was a sailor in the United States Coast Guard who was recognized for his courage. McCormick was born in Portland, Oregon, and served much of his 26 year Coast Guard career in Oregon. After his 1947 retirement, he made his home in Garibaldi, Oregon; he lived there for another 39 years.

William C. Hart was a sailor in the United States Coast Guard. He first enlisted on September 3, 1924, when he was 26 years old. He was promoted to Boatswain's mate and was in command of CG-213 when it effected a daring rescue of a stranded tugboat in November 1926. During this rescue Hart dived into dangerous seas to rescue a member of the tug's crew who had fallen overboard. According to his Coast Guard biography: "Hart jumped overboard and affected the rescue at great personal risk, as the two vessels were not more than 8 feet apart in the raging seas." For this act of heroism Hart was awarded the Gold Lifesaving Medal. In 1927 his heroism in fighting a gasoline fire earned him a commendation.

USCGC Daniel Tarr (WPC-1136) is the United States Coast Guard's 36th Sentinel-class cutter, and the first of three to be homeported in Galveston, Texas.

USCGC William Sparling (WPC-1154) is the United States Coast Guard's 54th Sentinel-class cutter.

USCGC Harold Miller (WPC-1138) is the United States Coast Guard's 38th Sentinel-class cutter.

USCGC Glen Harris (WPC-1144) will be the United States Coast Guard's 44th Sentinel-class cutter.

USCGC Edgar Culbertson (WPC-1137) is the United States Coast Guard's 37th Sentinel-class cutter, and the second of three to be homeported in Galveston, Texas.

References

1 2 3 Connie Braesch (2010-11-11). "Coast Guard Heroes: Richard Dixon". United States Coast Guard. Archived from the original on 2012-09-03. Richard Dixon, a Boatswain's Mate stationed at Tillamook Bay, was awarded two Coast Guard Medals for his heroic actions on July Fourth weekend, 1980.
1 2 Stephanie Young (2010-10-27). "Coast Guard Heroes". United States Coast Guard. Archived from the original on 2012-11-27. Retrieved 2012-04-20.
↑ Clive Lawford (2011). "US Coast Guard Medal Awards" . Retrieved 2013-01-10. Petty Officer Dixon is cited for heroism on the afternoon of 3 July 1980 while serving as the coxswain of Coast Guard Motor Lifeboat (MLB) 44409.
↑ Admiral J. B. Hayes (2 February 1981), Citation to accompany the award of the Coast Guard Medal to Richard D. Dixon (PDF)
↑ "Richard Dixon – Recipient -". valor.militarytimes.com. Retrieved 31 March 2023.
↑ "FRC Plan B: The Sentinel Class". Defense Industry Daily. 2014-05-02. Archived from the original on 2014-07-07. Retrieved 2014-04-03. All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...
↑ "U.S. Coast Guard announces name for first Sentinel-class cutter". United States Coast Guard. 2010-03-22. Archived from the original on 2010-03-25. Retrieved 2013-02-01. Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.
↑ "Bollinger delivers FRC Richard Dixon". Marine Log. 2015-04-15. Retrieved 2016-04-03. Bollinger Shipyards LLC, Lockport, LA, has delivered the Richard Dixon, the thirteenth 154 ft Fast Response Cutter (FRC) to the United States Coast Guard.
↑ Rhonda Carpenter (2012-11-05). "Coast Guard Commissions Third Fast Response Cutter, William Flores". Defense Media Network. Archived from the original on 2013-03-24. The first six FRCs for District 7 will be homeported in Miami; the next six in Key West; and the remaining six in Puerto Rico.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[UscgBioRichardDixon-1] 1 2 3 Connie Braesch (2010-11-11). "Coast Guard Heroes: Richard Dixon". United States Coast Guard. Archived from the original on 2012-09-03. Richard Dixon, a Boatswain's Mate stationed at Tillamook Bay, was awarded two Coast Guard Medals for his heroic actions on July Fourth weekend, 1980.

[UscgHeroes2010-10-17-2] 1 2 Stephanie Young (2010-10-27). "Coast Guard Heroes". United States Coast Guard. Archived from the original on 2012-11-27. Retrieved 2012-04-20.

[mlb44-3] Clive Lawford (2011). "US Coast Guard Medal Awards" . Retrieved 2013-01-10. Petty Officer Dixon is cited for heroism on the afternoon of 3 July 1980 while serving as the coxswain of Coast Guard Motor Lifeboat (MLB) 44409.

[4] Admiral J. B. Hayes (2 February 1981), Citation to accompany the award of the Coast Guard Medal to Richard D. Dixon (PDF)

[5] "Richard Dixon – Recipient -". valor.militarytimes.com. Retrieved 31 March 2023.

[Daily2014-04-01-6] "FRC Plan B: The Sentinel Class". Defense Industry Daily. 2014-05-02. Archived from the original on 2014-07-07. Retrieved 2014-04-03. All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...

[7] "U.S. Coast Guard announces name for first Sentinel-class cutter". United States Coast Guard. 2010-03-22. Archived from the original on 2010-03-25. Retrieved 2013-02-01. Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.

[MarineLog2015-04-15-8] "Bollinger delivers FRC Richard Dixon". Marine Log. 2015-04-15. Retrieved 2016-04-03. Bollinger Shipyards LLC, Lockport, LA, has delivered the Richard Dixon, the thirteenth 154 ft Fast Response Cutter (FRC) to the United States Coast Guard.

[DefenseMediaNetwork2012-11-05-9] Rhonda Carpenter (2012-11-05). "Coast Guard Commissions Third Fast Response Cutter, William Flores". Defense Media Network. Archived from the original on 2013-03-24. The first six FRCs for District 7 will be homeported in Miami; the next six in Key West; and the remaining six in Puerto Rico.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]