 |
Robert James Eaton | |
|---|---|
| Born | Buena Vista, Colorado, U.S. |
| Nationality | American |
| Education | University of Kansas (BS) |
| Occupation | Businessman |
Robert James "Bob" Eaton (born February 13, 1940) [1] is an American businessman, who was Chairman and former CEO of Chrysler Corporation.
| This section of a biography of a living person does not include any references or sources .(October 2019) |
Eaton was born in Buena Vista, Colorado and grew up in Arkansas City, Kansas. He graduated with a B.S. degree in mechanical engineering from the University of Kansas in 1963. He was in the Kappa Sigma Fraternity.
Upon graduation he joined General Motors and in 1973 he was made chief engineer of GM's new front wheel drive X-body cars. In 1982 he was promoted to vice-president of advanced engineering before being named president of GM Europe in 1988. It was here that Chrysler Corporation CEO Lee Iacocca found Eaton and hired him to be his successor as CEO. This was controversial at the time, because Bob Lutz was the expected successor to the CEO position, and Iacocca later indicated that he indeed felt that Lutz would have been the better choice as his successor. [2]
Eaton was the Chairman and CEO of Chrysler from 1993 until 1998. In that position, he was responsible for the sale of Chrysler Corporation to Daimler-Benz, which formed DaimlerChrysler. [3]
Eaton was elected as a member into the National Academy of Engineering (NAE) in 1989 for leading design and development of modern front-wheel-drive, body-frame-integral automobiles and for introducing advanced automotive manufacturing techniques. He was also a chairman of the NAE.
He was elected a director of Chevron in September 2000. [4]
He has been on the board of International Paper. He is a trustee of the University of Kansas Endowment Association. As of 2003 [update] , he lives in Naples, Florida, with his wife, Connie.[ citation needed ]
The Mercedes-Benz Group AG is a German multinational automotive corporation headquartered in Stuttgart, Baden-Württemberg, Germany. It is one of the world's leading car manufacturers. Daimler-Benz was formed with the merger of Benz & Cie., the world's oldest car company, and Daimler Motoren Gesellschaft in 1926. The company was renamed DaimlerChrysler upon the acquisition of American automobile manufacturer Chrysler Corporation in 1998, and was again renamed Daimler AG upon divestment of Chrysler in 2007. In 2021, Daimler AG was the second-largest German automaker and the sixth-largest worldwide by production. In February 2022, Daimler was renamed Mercedes-Benz Group as part of a transaction that spun-off its commercial vehicle segment as an independent company, Daimler Truck.
William Redington Hewlett was an American engineer and the co-founder, with David Packard, of the Hewlett-Packard Company (HP).
Lido Anthony "Lee" Iacocca was an American automobile executive best known for the development of the Ford Mustang, Continental Mark III, and Ford Pinto cars while at the Ford Motor Company in the 1960s, and for reviving the Chrysler Corporation as its CEO during the 1980s. He was president of Chrysler from 1978 to 1991 and chairman and CEO from 1979 until his retirement at the end of 1992. He was one of the few executives to preside over the operations of two of the United States' Big Three automakers.
Norman Ralph "Norm" Augustine is a U.S. aerospace businessman who served as United States Under Secretary of the Army from 1975 to 1977. Augustine served as chairman and CEO of the Lockheed Martin Corporation. He was chairman of the Review of United States Human Space Flight Plans Committee.
The LH platform served as the basis for the Chrysler Concorde, Chrysler LHS, Chrysler 300M, Dodge Intrepid, Eagle Vision, and the final Chrysler New Yorker. A Plymouth to be called the "Accolade" was planned, but never saw production. The platform pioneered Chrysler's "cab-forward" design; featured on some Chrysler, Dodge, and Eagle cars in the 1990s and early 2000s.
Robert Anthony Lutz is a Swiss-American automotive executive. He served as a top leader of all of the United States Big Three automobile manufacturers, having been in succession executive vice president of Ford Motor Company, president and then vice chairman of Chrysler Corporation, and vice chairman of General Motors.
Jürgen Erich Schrempp was the CEO of Daimler-Benz from May 1995 to December 31, 2005, which became DaimlerChrysler, a German-American car and truck manufacturer. Following a decision of the board taken on July 28, 2005, he was succeeded on January 1, 2006, by Chrysler frontman Dieter Zetsche. Schrempp was the architect of the merger joint venture between Daimler Benz and Chrysler, which ultimately ended in failure when Chrysler was sold in 2007.
Edward Earl Whitacre Jr. is the former Chairman and CEO of General Motors. He is also a former chairman of the board and chief executive officer of AT&T, previously Southwestern Bell Corporation (SBC). He served as national president of the Boy Scouts of America from 1998 to 2000. On September 1, 2010, Whitacre stepped down as CEO, and retired as chairman of the board by the end of 2010.
Dieter Zetsche is a German engineer and business executive. He is the chairman of TUI AG. He was the chairman of the board of management of Daimler AG and head of Mercedes-Benz until 22 May 2019, a role he had held since 2006, in addition to being a member of the company's board since 1998.
Jerome Bailey York, commonly known as Jerry York, was an American businessman, and the chairman, president and CEO of Harwinton Capital. He was the former CFO of IBM and Chrysler, and was CEO of Micro Warehouse. He was a chief aide to Kirk Kerkorian and his Tracinda investment company. In February 2006, Kerkorian helped elect York to the board of directors of General Motors, from which he had previously resigned.
John Francis "Jack" Smith Jr. is an American businessman and executive who formerly served as COO in 1992, CEO from 1992 to 2000 and then chairman of the board of directors of General Motors from 1996 to 2000.
François J. Castaing was a French automotive executive with Renault, American Motors, and Chrysler. He was an engineering graduate from École Nationale Supérieure d'Arts et Métiers in Paris, and worked in Europe for Gordini and Renault before being named vice president for Product Engineering and Development at American Motors Corporation (AMC).
Alan Roger Mulally is an American aerospace engineer and manufacturing executive. He served as the CEO of Boeing Commercial Airplanes from 1998 to 2006, and later as president and chief executive officer of the Ford Motor Company from 2006 to 2014.
The DaimlerChrysler–Mitsubishi alliance refers to the 69-month period during which U.S.-German automaker DaimlerChrysler AG (DCX) held a controlling stake in Mitsubishi Motors Corporation (MMC). First established on March 27, 2000, with the signing of a letter of intent, it was initiated by Jürgen E. Schrempp, the chairman of DCX, who was attempting to build what he called a "Welt AG" which would have as widespread a presence across worldwide automotive markets as its rivals. The merger with the Chrysler Corporation had increased Daimler-Benz's share of the North American market, and Mitsubishi Motors offered a gateway to Asia.
The University of Kansas School of Engineering, founded in 1891 is the oldest Engineering School in the State of Kansas, although engineering degrees were awarded as early as 1873. It is an ABET accredited, public engineering school located on the main campus of the University of Kansas in Lawrence, Kansas.
Andreas Renschler is a German engineering manager. He is the former Chief Executive Officer of TRATON SE and member of the Board of Management of Volkswagen AG. Furthermore he is chairman of the Latin America Committee of German Business.
The history of Chrysler involves engineering innovations, high finance, wide alternations of profits and losses, various mergers and acquisitions, and multinationalization. Chrysler, a large automobile manufacturer, was founded in the 1920s and continues under the name Stellantis North America.
Thomas Charles Gale is an American automobile designer widely known for his work with the Chrysler, Dodge and Plymouth marques. Gale and his design partners Trevor Creed and John Herlitz were instrumental with breakthrough designs that rescued Chrysler twice from the brink of bankruptcy.
Leo-Arthur Kelmenson was an American advertising executive. He was chief executive of Kenyon & Eckhardt and the Bozell Group. A confidant and close associate of Lee Iacocca, he was known for contributing the turnaround of Chrysler Corporation by creating the ad campaign that helped to revive the ailing company and reshape its image.