Rotor Flight Dynamics LFINO

Last updated

LFINO
Role Autogyro
National origin United States
Manufacturer Rotor Flight Dynamics
DesignerErnie Boyette and Dick DeGraw
First flightFebruary 2006
Introduction2005
StatusPrototype only (2011)
Number builtOne

The Rotor Flight Dynamics LFINO (Leap Flight In Normal Operations and pronounced by the designers as "ell if I know") is an American experimental autogyro that was designed by Ernie Boyette and Dick DeGraw, with a single prototype produced by their company Rotor Flight Dynamics of Wimauma, Florida. The aircraft was intended as a proof-of-concept for evaluation for police or paramilitary use. [1] [2]

Contents

Design and development

The LFINO was designed to test out the use of a powered rotor autogyro to allow zero speed take-offs and landings and more efficient forward flight. The design features a single three-bladed main rotor that was built in-house, a two-seats-in side-by-side configuration enclosed bulbous cockpit, tricycle landing gear mounted on stub wings, a triple tail and a single four cylinder liquid-cooled Subaru automotive engine in pusher configuration. [1] [3] [4]

The aircraft's frame is made from aluminium and the cabin is of non-structural fiberglass. The aircraft is equipped with a helicopter-style collective pitch control to allow "jump" takeoffs. Take-offs are accomplished by powering the rotor system to 150% cruise rpm and then increasing collective rapidly to jump the aircraft into the air where it can then fly away. [2]

Operational history

The sole example was built in 2005 and registered in the United States with the Federal Aviation Administration in the Experimental - Amateur-built category on 21 March 2005. It first flew in about February 2006. The aircraft was first shown publicly at Wauchula, Florida during the Bensen Days show in April 2005 as a static display, since it had not then yet flown. It was first flown publicly during Bensen Days in April 2006. The prototype was exported to Spain and its US registration was cancelled on 11 April 2008. [1] [2] [3] [5]

Specifications (LFINO)

Data from Aero News Network [2]

General characteristics

Performance


Related Research Articles

<span class="mw-page-title-main">Autogyro</span> Rotorcraft with unpowered rotor

An autogyro, also known as a gyroplane, is a type of rotorcraft that uses an unpowered rotor in free autorotation to develop lift. Forward thrust is provided independently, by an engine-driven propeller. While similar to a helicopter rotor in appearance, the autogyro's rotor must have air flowing across the rotor disc to generate rotation, and the air flows upwards through the rotor disc rather than down.

The CarterCopter is an experimental compound autogyro developed by Carter Aviation Technologies in the United States to demonstrate slowed rotor technology. On 17 June 2005, the CarterCopter became the first rotorcraft to achieve mu-1 (μ=1), an equal ratio of airspeed to rotor tip speed, but crashed on the next flight and has been inoperable since. It is being replaced by the Carter Personal Air Vehicle.

<span class="mw-page-title-main">Bensen B-8</span> Small, single-seat autogyro

The Bensen B-8 is a small, single-seat autogyro developed in the United States in the 1950s. Although the original manufacturer stopped production in 1987, plans for homebuilders are still available as of 2019. Its design was a refinement of the Bensen B-7, and like that aircraft, the B-8 was initially built as an unpowered rotor-kite. It first flew in this form in 1955, and on 6 December a powered version, designated B-8M first flew. The design proved to be extremely popular and long-lasting, with thousands of sets of plans sold over the next thirty years.

<span class="mw-page-title-main">Carter PAV</span> Two-bladed compound autogyro

The Carter PAV is a two-bladed, compound autogyro developed by Carter Aviation Technologies to demonstrate slowed rotor technology. The design has an unpowered rotor mounted on top of the fuselage, wings like a conventional fixed-wing aircraft mounted underneath, and a controllable pitch pusher propeller at the rear of the fuselage. Heavy weights are placed in the rotor tips to enhance rotational energy and to reduce flapping.

Carter Aviation Technologies is a privately held aviation research and development company based in Wichita Falls, Texas, United States.

<span class="mw-page-title-main">Wallis WA-116 Agile</span> Type of aircraft

The Wallis WA-116 Agile is a British autogyro developed in the early 1960s by former Royal Air Force Wing Commander Ken Wallis. The aircraft was produced in a number of variants, one of which, nicknamed Little Nellie, was flown in the 1967 James Bond film You Only Live Twice. Little Nellie is currently on static display at The Shuttleworth Collection, Old Warden, Bedfordshire in the UK.

<span class="mw-page-title-main">AutoGyro Calidus</span> German autogyro

The AutoGyro Calidus is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. The aircraft is supplied as a complete ready-to-fly-aircraft.

<span class="mw-page-title-main">Rotor Flight Dynamics Dominator</span> Type of aircraft

The Rotor Flight Dynamics Dominator is an American autogyro designed by Ernie Boyette of Rotor Flight Dynamics of Wimauma, Florida, and made available in the form of plans and kits for amateur construction.

<span class="mw-page-title-main">AutoGyro Cavalon</span> German autogyro

The Autogyro Cavalon is a German autogyro, designed and produced by AutoGyro GmbH of Hildesheim. It was introduced at the 2011 Aero show in Friedrichshafen. The aircraft is supplied as a complete ready-to-fly-aircraft.

The Air Command Tandem is an American autogyro designed and produced by Air Command International of Caddo Mills, Texas. The aircraft is supplied as a kit for amateur construction or as a ready-to-fly aircraft.

The Gyro-Kopp-Ters Midnight Hawk is an American autogyro, designed by Bob and Arden Kopp and produced by their company, Gyro-Kopp-Ters of Lake City, Florida. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Gyro-Kopp-Ters Twin Eagle is an American autogyro, designed by Bob and Arden Kopp and produced by their company, Gyro-Kopp-Ters of Lake City, Florida. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Layzell Merlin is a British autogyro that was designed by Scottish designer Jim Montgomery and produced by Layzell Gyroplanes of Quedgeley, Gloucester. The aircraft was supplied as a kit for amateur construction.

The North American Rotorwerks Pitbull Ultralight is an American autogyro, designed and produced by North American Rotorwerks of Tukwila, Washington. When it was available the aircraft was supplied as a kit for amateur construction, but by 2013 production had been suspended.

The Phenix Aviation Phenix is a Spanish autogyro, under development by Phenix Aviation of Alicante. The aircraft is intended to be supplied as a complete ready-to-fly-aircraft.

<span class="mw-page-title-main">AeroMobil s.r.o. AeroMobil</span> Slovakian roadable aircraft

The AeroMobil s.r.o. AeroMobil is a prototype roadable aircraft, designed by Štefan Klein and first flown in 2013. The aircraft will be produced by Slovak company AeroMobil s.r.o.

The Amax Double Eagle TT is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria in the late 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Amax Eagle is an Australian autogyro that was designed and produced by Amax Engineering of Donvale, Victoria, introduced in the early 1990s. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

Rotor Flight Dynamics Inc was an American aircraft manufacturer based in Wimauma, Florida and owned by Ernie Boyette. The company was founded in 1986 and specialized in the design and manufacture of autogyros in the form of plans and kits for amateur construction.

The Pawnee Chief is an American helicopter that was designed and produced by Pawnee Aviation of Longmont, Colorado and later McCook, Nebraska. It was first flown in December 2005. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 185. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. 1 2 3 4 O'Brien, Kevin (April 5, 2006). "Bensen Days: LFINO Leaps Into Public View". Aero News Network. Retrieved January 15, 2013.
  3. 1 2 Federal Aviation Administration (January 15, 2013). "N-Number Inquiry Results - N37DE" . Retrieved January 15, 2013.
  4. ↑ Rotor Flight Dynamics (2006). "L.F.I.N.O." Retrieved January 15, 2013.
  5. ↑ Federal Aviation Administration (January 15, 2013). "Make / Model Inquiry Results" . Retrieved January 15, 2013.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.