The Royal Arsenal Railway was a private military railway which operated inside the Royal Arsenal, Woolwich, southeast London.
The Royal Arsenal Railway was a private military railway which operated inside the Royal Arsenal, Woolwich, southeast London.
The earliest parts of this railway system proper were constructed to standard gauge from 1859 onwards to replace an ad hoc arrangement of individual plateways. [1] [2] Laying of plateways had started in 1824 and was completed by 1854–1855; they then came under the control of the Corps of Royal Engineers. [2] From 1871 onwards some of the track was constructed as 18 in (457 mm) gauge and it comprised some 50 to 60 miles (80 to 97 km) of track. [1] [3] It ran in some form from 1871 until much of it was abandoned after the First World War. The remains of the system continued in use until after the Second World War, with the final trains running in 1966.
Parts of the 18 in gauge track were built as dual gauge track, with the outer rails gauged to standard gauge; other parts of the site were only served by standard gauge track. [1] [3] [4] Some 120 miles (190 km) of mixed or purely standard gauge track existed by 1918. [1] [3] [4] Some 1 ft 11+1⁄2 in (597 mm) narrow gauge track existed at the site.
The challenge of moving materials and people through the Royal Arsenal was recognised in the early 19th. century. In 1812 a canal was added to provide transport around the site. On 14 May 1824, the first plateway was approved at a cost of £459. The plateway proved successful and further extension were gradually added. The last of these was approved on 23 August 1854, when £1920 was spent. [5]
Construction of an 18 in (457 mm) gauge railway was approved in 1866. The Crimean war had caused a major increase in ammunition production and the railway was needed to move materiel around the site. [2] The railway was based on the Crewe Works Railway which had been operating since 1862 inside the London and North Western Railway's Crewe Works. [2] [4]
Construction of the Royal Arsenal's narrow gauge railway began in 1871. [3] although it was not officially opened until 10 January 1873. [1] The railway provided for the movement of both goods and passengers within the Royal Arsenal. [2] This system, along with a similar one operated by the Admiralty at Chatham Dockyard, were important proving grounds for the 'mainstream' outside framed narrow gauge steam locomotive as exemplified in particular by the pioneering '6-inch by 8-inch' Manning Wardle 0-4-0ST locomotives used at both sites. [3]
During the 1870s and 1880s further 18-inch (457 mm) gauge steam locomotives arrived at Woolwich from Vulcan Foundry and Hudswell Clarke whilst experiments were carried out under the direction of Lt. Col. F.E. Beaumont into the development of compressed air motive power for rail usage on both main gauges of the Arsenal's railway system. [3] The system's passenger service for workmen also probably began during the 1880s initially using simple 'knifeboard' carriages inspired by vehicles used in Chatham dockyard and by the Royal Engineers. The 1890s saw further steam locomotives added, mainly of the 0-4-2T configuration built for the abortive Suakin-Berber campaign.
In 1896, internal combustion locomotives were introduced. The first of these, Lachesis, was the second internal combustion locomotive built in Britain, and likely the third anywhere in the world. It was in any case the first truly successful internal combustion locomotive. [6]
The period from 1900 to 1916 saw the 18 inch gauge system grow become the most extensive locomotive-worked narrow-gauge railway on the British mainland[ citation needed ]. Between 1919 and 1933, various locomotives were advertised for sale. [1] [3] Some of the dual gauge track was removed at the same time. [1] [3] However five new narrow gauge locomotives were bought between 1934 and 1941; and a final one from Hunslet Engine Company in 1954. [1] [3] The remaining narrow gauge lines finally closed in 1966. [4]
By the 1890s, the goods rolling stock on the narrow gauge part of the RAR consisted mainly of (1) a four-wheeled wagon utilising a standard wooden underframe with a cast iron double bearing assembly attached under each side to accommodate the wheelsets; and (2) a channel framed bogie wagon with cast iron bogie frames. There were at least three designs of bogie carriage in use at this time, namely the original 'knifeboard' open pattern, a closed 1st/2nd class composite with diagonal body planking and a 'curly roofed' superintendent saloon. There were also a number of Bagnall and Fowler bogie wagons left over from the abortive Suakin-Berber campaign. By World War One, the closed seven plank bogie wagon using the type (2) chassis above was the most ubiquitous item of rolling stock and a small number of these even remained on site after the closure of the railway system. There were also seven narrow gauge passenger coaches supplied by Bristol Wagon & Carriage Works in 1917 but these, along with all other narrow gauge passenger stock, are thought to have been disposed of in 1923.
 | This section needs expansion. You can help by adding to it. (June 2008) |
This railway was initially linked into the national railway system, to the South Eastern Railway, near Plumstead railway station. [1] [3] According to local press reports, the link was opened in 1859 and this would appear to be the date that the early plateways were replaced by more conventional permanent way. Early internal motive power appears to have been by means of horses, whilst during the period from 1871 to 1875, the 18 inch gauge locomotive Lord Raglan appears to have undertaken some standard gauge stock movements using special bufferbeams (later removed) and mixed gauge track. [3] The first standard gauge locomotive, Manning Wardle 0-4-0ST Driver, arrived on the Arsenal's railway system in 1875 and for the next thirteen years exclusive reliance was placed on the Leeds company's four coupled products for day-to-day working (even two out of the three experimental compressed air locomotives tested on the standard gauge line during 1880–1 were officially Manning Wardle products) until a Hawthorn Leslie incursion into the market in 1888.
From this period up to 1917 the standard gauge locomotive fleet was augmented steadily by second-hand acquisitions and new machines from various sources. Rolling stock by World War One consisted of such diverse items as standard goods wagons, rail ambulances, proof sleds and gun wagons requiring special heavy gauge running rails. The surviving pre-1903 standard gauge locomotives in 1919 were quickly disposed of bar one 'hulk' but overall the inter-war rationalisation was less severe than was the case with the 18 inch gauge and the passenger service was even transferred to the standard gauge in 1923. Despite the transfer of much material away from the Arsenal in the early stages of World War Two, there was a revival of fortunes during this period, with the acquisition of more steam and diesel locomotives taking place during the period from 1936 to 1940. During the post Suez rundown, withdrawals of the steam fleet came thick and fast and there were even a few diesel replacements drafted in during the late 1950s from other Ordnance sites, but this did not delay the inevitable and the standard gauge system closed when munitions manufacture at Woolwich ceased in 1967.
A narrow-gauge railway is a railway with a track gauge narrower than 1,435 mmstandard gauge. Most narrow-gauge railways are between 600 mm and 1,067 mm.
The Narrow Gauge Railway Museum is a purpose-built museum dedicated to narrow-gauge railways situated at the Tywyn Wharf station of the Talyllyn Railway in Tywyn, Gwynedd, Wales.
In rail transport, track gauge is the distance between the two rails of a railway track. All vehicles on a rail network must have wheelsets that are compatible with the track gauge. Since many different track gauges exist worldwide, gauge differences often present a barrier to wider operation on railway networks.
The Leek and Manifold Valley Light Railway (L&MVLR) was a narrow gauge railway in Staffordshire, England that operated between 1904 and 1934. The line mainly carried milk from dairies in the region, acting as a feeder to the 4 ft 8+1⁄2 instandard gauge system. It also provided passenger services to the small villages and beauty spots along its route. The line was built to a 2 ft 6 in narrow gauge and to the light rail standards provided by the Light Railways Act 1896 to reduce construction costs.
The Hunslet Engine Company is a locomotive building company, founded in 1864 in Hunslet, England. It manufactured steam locomotives for over 100 years and currently manufactures diesel shunting locomotives. The company owns a substantial fleet of Industrial and depot shunting locomotives which are available for hire. The company is part of Ed Murray & Sons Ltd.
The Victorian Railways (VR), trading from 1974 as VicRail, was the state-owned operator of most rail transport in the Australian state of Victoria from 1859 to 1983. The first railways in Victoria were private companies, but when these companies failed or defaulted, the Victorian Railways was established to take over their operations. Most of the lines operated by the Victorian Railways were of 5 ft 3 in. However, the railways also operated up to five 2 ft 6 in narrow gauge lines between 1898 and 1962, and a 4 ft 8+1⁄2 instandard gauge line between Albury and Melbourne from 1961.
Manning Wardle was a steam locomotive manufacturer based in Hunslet, Leeds, West Yorkshire, England.
British industrial narrow-gauge railways are narrow-gauge railways in the United Kingdom and the Isle of Man that were primarily built to serve one or more industries. Some offered passenger services for employees or workmen, but they did not run public passenger trains. They are categorized by the primary industry they served.
The Eaton Hall Railway was an early 15 in gauge minimum gauge estate railway built in 1896 at Eaton Hall in Cheshire. The line, which connected the Grosvenor estate with sidings at Balderton on the GWR Shrewsbury to Chester Line about 3 miles (4.8 km) away, opened in 1896. It was built for the Duke of Westminster by Sir Arthur Percival Heywood, who had pioneered the use of 15 in gauge with his Duffield Bank Railway at his house at Duffield, Derbyshire in 1874.
The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.
The Chattenden and Upnor Railway was a narrow gauge railway serving the military barracks and depot at Upnor, Kent and associated munitions and training depots. It started life in the early 1870s as a standard-gauge railway. The 2 ft 6 in narrow gauge working began in 1885, initially in a mixed gauge formation with the standard gauge, and post circa 1903 2 ft. 6 in. gauge exclusively. In the latter form the line continued in use until the end of 1961.
These are narrow-gauge railways at military establishments and former UK Government-owned explosives sites. These locations were often subject to the Official Secrets Act and other government restrictions, so many of them are less well documented.
Bogie exchange is a system for operating railway wagons on two or more gauges to overcome difference in the track gauge. To perform a bogie exchange, a car is converted from one gauge to another by removing the bogies or trucks, and installing a new bogie with differently spaced wheels. It is generally limited to wagons and carriages, though the bogies on diesel locomotives can be exchanged if enough time is available.
Gauge conversion is the changing of one railway track gauge to another.
Everard Richard Calthrop was a British railway engineer and inventor. Calthrop was a notable promoter and builder of narrow-gauge railways, especially of 2 ft 6 in narrow gauge, and was especially prominent in India. His most notable achievement was the Barsi Light Railway, but he is best known in his home country for the Leek and Manifold Valley Light Railway. Calthrop has been described as a "railway genius". Later in life he took an interest in aviation, patenting some early designs for parachutes.
The Amberley Museum Railway is a 2 ft narrow gauge railway based at Amberley Museum, Amberley, West Sussex. It has a varied collection of engines and rolling stock ranging from 18 in gauge to 5 ft 3 in gauge. It operates passenger trains at the museum using a mixture of steam, internal combustion and battery-electric locomotives.
The Wantage Tramway Company was a two-mile tramway that carried passengers and freight between the Oxfordshire town of Wantage and Wantage Road Station on the Great Western Main Line in England. Formed in 1873 to link Wantage Road station with its terminus at Mill Street, Wantage the line was cheaply built parallel to what was then the Besselsleigh Turnpike, and now the A338. The tramway closed to passengers in 1925 and to goods traffic in 1945.
Buffers and chain couplers are the de facto International Union of Railways (UIC) standard railway coupling used in the EU and UK, and on some surviving former colonial railways, such as in South America and India, on older rolling stock. Buffers and chain couplers are an assembly of several devices: buffers, hooks and links, or turnbuckle screws.