S333 Thunderstruck

Last updated
S333 Thunderstruck
Thunderstruck Revolver.jpg
Type Revolver
Place of originUnited States
Production history
Designedc. 2019
Manufacturer Standard Manufacturing
Unit cost$369 (MSRP)
Produced2019–present
Specifications
Mass18 oz (510 g)
Barrel  length1.25 or 1.5 in (32 or 38 mm)

Cartridge .22 Winchester Magnum Rimfire
Action Double action only (DAO) volley gun
Rate of fire 2 rounds (simultaneously) per pull
Feed system8-round cylinder
Sights Iron sights
References [1]

The S333 Thunderstruck is an aluminum-frame revolver, designed and manufactured by Standard Manufacturing of New Britain, Connecticut, and intended for concealed carry. Introduced in 2019, the S333 is a double barrel revolver with an eight-round cylinder. A type of volley gun, each trigger pull simultaneously fires two .22 Winchester Magnum Rimfire cartridges.

Contents

Background

Standard Manufacturing is known for producing the DP-12, a pump action double-barreled shotgun with dual tube magazines, with each trigger pull alternating which barrel is fired from. [2] In 2017, Standard Manufacturing introduced the S333 Volleyfire, a pepper-box revolver with a cylinder holding six rounds of .25 ACP, generally regarded as a low-powered cartridge. [3] The Volleyfire has dual firing mechanisms and barrels, such that each trigger pull fires two rounds simultaneously. [3] As of October 2019, the Volleyfire was no longer in production. [4]

Etymology

The "333" in the name is a reference to a firearms rule of three: "most self defense scenarios take place within three yards, with three shots fired in under three seconds." [5] [6]

Operation

Like its precursor the Volleyfire, the Thunderstruck has dual firing mechanisms and barrels, such that each trigger pull fires two rounds simultaneously. [4] The Thunderstruck's cylinder holds eight rounds of .22 Winchester Magnum Rimfire (.22 WMR). It has been offered with barrel lengths of 1.25 inches (32 mm) [4] and 1.5 inches (38 mm) [7] —the part number for both offerings is the same.

There is a partial trigger guard (not wrap-around) along with a blade safety on the trigger, which is meant to be pulled using two fingers and requires a pull exceeding 20 pounds-force (89 N). [4] Operation is double action only (DAO) and there is no exposed hammer.

Legality

Part of the definition of a machine gun per United States federal law is "Any weapon which shoots, is designed to shoot, or can be readily restored to shoot, automatically more than one shot without manual reloading, by a single function of the trigger". [8] However, per the manufacturer, the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has stated that the Thunderstruck "...does not meet the ATF definition of a 'machine gun'." [9] Reportedly, this is because the two rounds are fired simultaneously, not sequentially. [3]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition that is only commonly found in small-caliber firearms

A rim-fire is a type of metallic cartridge used in firearms where the primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845 by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the early 19th century, such as teat-fire and pinfire, only small caliber rimfire cartridges have survived to the present day with regular use. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition found in the world today in terms of units manufactured and sold.

Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada and China. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

<span class="mw-page-title-main">Volley gun</span> Gun with multiple single-shot barrels

A volley gun is a gun with multiple single-shot barrels that volley fired simultaneously or sequentially in quick succession. Although capable of unleashing intense firepower, volley guns differ from modern machine guns in that they lack autoloading and automatic fire mechanisms, and therefore their volume of fire is limited by the number of barrels bundled together.

Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">Harrington & Richardson</span> Firearms brand

Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">North American Arms</span> American arms company

North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).

<span class="mw-page-title-main">Break action</span> Type of firearm action

Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.

<span class="mw-page-title-main">Ruger Single-Six</span> Single action

The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Cylinder (firearms)</span> Cylindrical revolver part that holds rounds

In firearms, the cylinder is the cylindrical, rotating part of a revolver containing multiple chambers, each of which is capable of holding a single cartridge. The cylinder rotates (revolves) around a central axis in the revolver's action to sequentially align each individual chamber with the barrel bore for repeated firing. Each time the gun is cocked, the cylinder indexes by one chamber. Serving the same function as a rotary magazine, the cylinder stores ammunitions within the revolver and allows it to fire multiple times before needing to reload.

<span class="mw-page-title-main">Ruger SP101</span> Revolver

The Ruger SP101 is a series of double-action revolvers produced by the American company Sturm, Ruger & Co. The SP101 is a small frame and all-steel-construction carry revolver, with a five-shot ; six-shot ; or eight-shot cylinder.

<span class="mw-page-title-main">Title II weapons</span> Class of weapons under the National Firearms Act

Title II weapons, or NFA firearms, are designations of certain weapons under the United States National Firearms Act (NFA).

<span class="mw-page-title-main">Taurus Judge</span> Revolver

The Taurus Judge is a five shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.

<span class="mw-page-title-main">Ruger LCR</span> Revolver

The Ruger LCR is a compact revolver built by Sturm, Ruger & Co. and announced in January 2009. LCR stands for "Lightweight Compact Revolver". It incorporates several novel features such as a polymer grip and trigger housing, monolithic receiver, and constant force trigger. At 13.5 oz (380 g), the LCR is nearly 50% lighter than the stainless steel SP101, as only the barrel and fluted cylinder are made of stainless steel.

<span class="mw-page-title-main">Tranter (revolver)</span> Revolver

The Tranter revolver was a double-action cap & ball revolver invented around 1856 by English firearms designer William Tranter (1816–1890). Originally operated with a special dual-trigger mechanism later models employed a single-trigger mechanism much the same as that found in the contemporary Beaumont–Adams revolver.

<span class="mw-page-title-main">Colt M1878</span> Revolver

The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 until 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver. A total of 51,210 Model 1878 revolvers were manufactured, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.

The Chiappa Double Badger is an Italian made over and under combination gun manufactured by Chiappa Firearms. It comes in four versions: .22 LR over .410 bore, .22 WMR over .410 bore, .22 LR over 20 gauge, and .243 Winchester over .410 bore. It's marketed as "a great choice for hunting, survival, or fun recreational shooting".

Standard Manufacturing, LLC. is an American firearms manufacturer based in New Britain, Connecticut. The company was founded in 2014 by Louis Frutuoso. It serves as a subsidiary to Connecticut Shotgun Manufacturing Company, a manufacturer, repairer, and distributor of shotguns and related products.

References

  1. "S333 Thunderstruck". stdgun.com. Retrieved March 18, 2020.
  2. "Gun Review: Standard Manufacturing DP-12 shotgun (VIDEO)". Guns.com. Retrieved 2 May 2019.
  3. 1 2 3 Jeremy S. (January 18, 2017). "New From Standard Manufacturing: S333 Volleyfire". thetruthaboutguns.com. Retrieved March 18, 2020.
  4. 1 2 3 4 Zimmerman, Dan (October 29, 2019). "Gun Review: Standard Manufacturing S333 Thunderstruck Double Barrel Revolver". thetruthaboutguns.com. Retrieved March 18, 2020.
  5. TheFireArmGuy (November 7, 2019). "[FIREARM REVIEW] Standard manufacturing S333 Thunderstruck". concealednation.org. Retrieved March 18, 2020.
  6. "The S333 Thunderstruck™ - The Ultimate In Personal Protection". Standard Manufacturing LLC. July 10, 2019. Retrieved March 18, 2020 via YouTube.
  7. Sim, Levi (July 11, 2019). "The S333 Volleyfire Thunderstruck Offers A Curtain of Protection In .22 WMR – MSRP: $369". gunsamerica.com. Retrieved September 23, 2021.
  8. "26 U.S. Code § 5845. Definitions" . Retrieved March 18, 2020 via cornell.edu.
  9. "Standard Mfg's 8-Capacity, Double Barrel S333 Pistol Is Finally Available". ballisticmag.com. July 10, 2019. Retrieved March 18, 2020.