Related Research Articles
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.
SAKO, Limited is a Finnish firearm and ammunition manufacturer located in Riihimäki, Tavastia Proper in southern Finland. It also has owned the Tikka brand of bolt-action rifles since 1983, and is now owned by the Italian firearm holding company Beretta Holding.
The Winchester Model 70 is a bolt-action sporting rifle. It has an iconic place in American sporting culture and has been held in high regard by shooters since it was introduced in 1936, earning the moniker "The Rifleman's Rifle". The action has some design similarities to Mauser designs and it is a development of the earlier Winchester Model 54, itself being based on a Mauser 98–type action.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.
The Ruger M77 is a bolt-action rifle produced by Sturm, Ruger & Co. It was designed by Jim Sullivan during his three years with Ruger. It was designed primarily as a hunting rifle featuring a traditional Mauser K98-style two-lugged bolt with a claw extractor.
The APR is a bolt-action sniper rifle designed by the Thun-based Brügger & Thomet in 2003 as an evolution of the French PGM Précision.
The Winchester Model 121 is a single-shot bolt-action .22 caliber rimfire rifle that was produced from 1967 to 1973 by the Winchester Repeating Arms Company. The 121 can fire .22 Short, .22 Long, or .22 Long Rifle cartridges from its 20¾" barrel. The barrel rifling is 1 turn in 16 inches with a right-hand twist. The bolt is a controlled-round feed design and utilizes dual locking lugs on the front. The rifle also has an automatic safety that is engaged each time the bolt is cycled, so any time a round is loaded the safety is on and has to be manually turned off before the rifle is ready to fire. The Model 121 came with iron sights, with the rear sight being adjustable for elevation and windage. The receiver is also grooved to accept a scope if one is so desired. The Model 121's stock is a one-piece modified Monte Carlo, made of American hardwood with a Walnut finish.
The Howa 1500 or Howa M1500 is a bolt-action rifle produced in Japan by Howa Machinery. Introduced in 1979, it has been used by hunters as a hunting rifle with various cartridge offerings. It is also utilized by military and law enforcement elements as a sniper rifle. It is sold under the name of Howa Model 1500 Rifle for overseas markets.
The Parker-Hale Model 82 (M82) is the military version of the Parker-Hale 1200TX target rifle; it was accepted for service by several nations for both military and police use. In appearance and design terms the Model 82 is an entirely conventional sniping weapon. It uses a manual bolt action the same as the classic Mauser 98 rifle, allied to a heavy free-floating barrel chambered for the 7.62×51mm NATO round. The barrel weighs 1.98 kg and is manufactured from chrome molybdenum steel. The Model 82 has an integral four-round magazine and an entirely self-contained trigger unit which can be adjusted as required.
The Colt Canada C19 is a licence-built, Finnish-designed Tikka T3 CTR bolt-action rifle modified for the Canadian Rangers. The C19 replaced the longer and heavier Lee-Enfield No. 4 Mk.1 rifles which entered service in 1947.
The Tikka T3 is a series of bolt-action rifles manufactured by Sako under their Tikka brand in Riihimäki, Finland since 2003. The series is available in a wide variety of different sight, calibre and stock configurations as well as several barrel lengths. The rifle series was developed by Sako product development team led by Kari Kuparinen.
The Valmet Sniper M86 is a Finnish sniper rifle designed by the former Finnish state firearms company Valmet. The rifle was Valmet's first and only proper sniper rifle, and after the merger with Sako in 1986, its development work was the basis for the Sako TRG sniper rifles. The rifle was produced only in small numbers in 1987 due to the merger.
The Tikka M55 is a Finnish rifle designed by Finnish firearms company Tikkakoski in 1967–1968. M55 was the first centerfire rifle action designed by Tikkakoski, and it was manufactured from 1968 to 1989. Tikkakoski also developed a long action rifle based on the M55, called Tikka M65. The Tikka M55 was imported to the United States by Ithaca Gun Company.
The Tikka M65 is a Finnish rifle designed by a Finnish firearms company Tikkakoski in 1969. It was designed as a long action rifle on the basis of the short action Tikka M55 rifle, however its action differs much from the M55. Like the Tikka M55, the M65 was imported to the United States by Ithaca Gun Company.
The Sako S20 is a bolt-action rifle designed and manufactured by Finnish firearms company Sako since 2020. The rifle features an aluminium chassis, which allows for modularity and different configurations, due to which Sako calls it a hybrid rifle.
Sako 85 is a bolt-action rifle produced by the Finnish manufacturer Sako since 2006, and the name signifies that Sako celebrated 85 years that year. The model 85 is marketed as one of Sako's premium models for hunting, and is delivered in many different configurations and chamberings. According to Sako the rifle is available in over 1000 different configurations. Some examples are the Finnlight and Carbonlight models. Production ended at the end of 2022 for the newly introduced Sako 100.
The Sako 75 is a bolt-action rifle produced by the Finnish manufacturer Sako from 1996 until it was replaced by its successor, the Sako 85 in 2006, and finally discontinued in 2007.
Sako Quad is a bolt-action rifle made by the Finnish firearms manufacturer Sako. Quad is delivered in many configurations, and has a quick change barrel system which lets the user swap barrels using a 5 mm hex key. The bolt lift is 50 degrees. Sako Quad factory barrels are delivered chambered for .17 Mach 2, .22 LR, .17 HMR and .22 WMR. There are two types of magazines, one type for the shorter .17 M2 and .22 LR, and another for .17 HMR and .22 WMR. Visually, the Sako Quad has many similarities with Sako Finnfire. The Quad is delivered with a blued receiver and barrel, and the barrels are color coded according to their chambering. In cooperation with Sako, Burris has developed a scope sight with corresponding color coding on its elevation turret to match the ballistics of the different cartridges. The stock is available in either wood or synthetic material. The synthetic stock is available with a rubberized grip. The trigger is adjustable from 500 g to 2000 g.
Sako Finnfire, also known as the Sako Finnfire P94S, is a bolt action rifle made by Finnish firearms manufacturer Sako. The rifle was introduced in 1996, and is no longer in production. The Finnfire was largely based on the Finnscout 78, and also shared some parts with the TRG-S (M995) centerfire series of rifles. One of the main differences compared to the Finnscout 78 was that many of the steel parts on the Finnscout 78 had been replaced with plastic parts, such as for example the trigger guard and the magazine. The rifle had an adjustable single stage trigger where the pull weight could be set between 1–2 kg with a similar design as the TRG-S series.
Sako Finnfire II is a bolt action rifle made by Finnish firearms manufacturer Sako since 2014. Even if the Finnfire II is related namewise to the older Sako Finnfire from 1996, it technically has a mix of features from the Sako Finnfire and the newer Sako Quad. The receiver has many similarities with the Quad, but the barrel interface to the receiver is neither similar to the quick change barrel system of the Quad nor the threaded interface of the Finnfire. Instead of using two cross bolts like on the Finnfire, the Finnfire II uses a cross pin such that the barrel is not easily swapped by the user. The bolt has two locking lugs and a 50 degree bolt lift. Factory barrels are available chambered in either .17 HMR or .22 LR, and have rifling twists of 229 mm (1:9") and 419 mm. The muzzle is threaded from the factory. The rifle has an adjustable single stage trigger with where the pull weight can be set between 1–2 kg, and is also available as a set trigger.
