Sako Finnfire | |
---|---|
Type | Repeating rifle |
Place of origin | Finland |
Production history | |
Designer | Sako |
Specifications | |
Length | 1006-1056 mm |
Barrel length | 560-610 mm |
Cartridge | .22 LR |
Action | Bolt action |
Sights | 11 mm dovetail rail |
Sako Finnfire, also known as the Sako Finnfire P94S, is a bolt action rifle made by Finnish firearms manufacturer Sako. The rifle was introduced in 1996, [1] and is no longer in production.[ when? ] The Finnfire was largely based on the Finnscout 78, [1] and also shared some parts with the TRG-S (M995) centerfire series of rifles. [1] One of the main differences compared to the Finnscout 78 was that many of the steel parts on the Finnscout 78 had been replaced with plastic parts, such as for example the trigger guard and the magazine. [2] The rifle had an adjustable single stage trigger where the pull weight could be set between 1–2 kg [3] with a similar design as the TRG-S series.
The Finnfire was first launched in the Hunter version, which was followed by the larger Varmint version with a wider forend and heavier barrel. The even larger Range version was added later. All the versions came with walnut stocks and a free floating barrel. The Hunter version had the slimmest stock, [4] while the Varmint version had a wider forend and a rubberized recoil pad, [5] and the Range version stock [6] was the heaviest stock intended for precision rifle shooting, but still became popular with some types of hunters. [7] Only the Hunter version came with open sights, but it was not uncommon to remove those and instead attach a scope sight to the dovetail rail.
The receiver is machined from a piece of steel, and the barrel was mounted in the receiver with a push fit and attached with two cross bolts. The barrels were hammer forged with a 412.75 mm (161⁄4") rifling twist. The Finnfire Hunter was delivered with a 560 mm (22") long barrel, while the Varmint and Range version were delivered with a 610 mm (23") long barrel. Only later production models were delivered with a threaded muzzle from the factory. The bolt has two locking lugs on the back, and the bolt lift is 50 degrees. [1]
The RK 62, officially 7.62 RK 62 and commercially M62, is an assault rifle manufactured by Valmet and Sako. It is the standard issue infantry weapon of the Finnish Defence Forces.
Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.
The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. The TRG-21 and TRG-22 are designed to fire standard .308 Winchester sized cartridges, while the TRG-41 and TRG-42 are designed to fire more powerful and dimensionally larger .300 Winchester Magnum (7.62×67mm) and .338 Lapua Magnum (8.6×70mm) cartridges. They are available with olive drab green, desert tan/coyote brown, dark earth or black stocks, and are also available with a folding stock.
The Savage Model 110 is a bolt-action repeating rifle made by Savage Arms. It was designed in 1958 by Nicholas L. Brewer. It was patented in 1963. The Model 110 has been in continuous production since that time.
The CZ 452 also known as BRNO Model Two .22 Rifle is a series of magazine-fed bolt-action rimfire repeating rifles manufactured by the Czech firearms manufacturer Česká Zbrojovka Uherský Brod and imported into the United States by CZ-USA. Most versions of the 452 rifle series were discontinued in 2011 and replaced by the CZ 455, although CZ continues to offer the CZ 452 American in a left-hand model, with the bolt handle and ejection port located on the left side of the rifle.
The APR is family of Swiss bolt-action sniper rifles designed in 2003 as a further evolution of the French PGM Précision rifles by the Thun-based Brügger & Thomet company.
The CZ-550 is a bolt-action hunting rifle series manufactured by Česká zbrojovka Uherský Brod. The CZ 550 series is available with a medium or magnum sized action. The CZ 550 rifle is based on the Mauser 98 rifle.
The Parker-Hale Model 82 (M82) is the military version of the Parker-Hale 1200TX target rifle; it was accepted for service by several nations for both military and police use. In appearance and design terms the Model 82 is an entirely conventional sniping weapon. It uses a manual bolt action the same as the classic Mauser 98 rifle, allied to a heavy free-floating barrel chambered for the 7.62×51mm NATO round. The barrel weighs 1.98 kg and is manufactured from chrome molybdenum steel. The Model 82 has an integral four-round magazine and an entirely self-contained trigger unit which can be adjusted as required.
The CZ 455 is a series of magazine-fed bolt-action rimfire repeating rifle manufactured by the Czech firearms manufacturer Česká Zbrojovka Uherský Brod and imported into the United States by CZ-USA. It is a successor of the highly popular CZ 452 rifles, and is chambered for the .22 LR, .22 WMR and .17 HMR calibers.
The Valmet Sniper M86 is a Finnish sniper rifle designed by the former Finnish state firearms company Valmet. The rifle was Valmet's first and only proper sniper rifle, and after the merger with Sako in 1986, its development work was the basis for the Sako TRG sniper rifles. The rifle was produced only in small numbers in 1987 due to the merger.
The Tikka M55 is a Finnish rifle designed by Finnish firearms company Tikkakoski in 1967–1968. M55 was the first centerfire rifle action designed by Tikkakoski, and it was manufactured from 1968 to 1989. Tikkakoski also developed a long action rifle based on the M55, called Tikka M65. The Tikka M55 was imported to the United States by Ithaca Gun Company.
The Tikka M65 is a Finnish rifle designed by a Finnish firearms company Tikkakoski in 1969. It was designed as a long action rifle on the basis of the short action Tikka M55 rifle, however its action differs much from the M55. Like the Tikka M55, the M65 was imported to the United States by Ithaca Gun Company.
The RK 71, commercially M71, is a Finnish assault rifle designed and manufactured by Valmet. It is based on the RK 62, which in turn is based on the Soviet AK-47. Finnish Defence Forces tested the 7.62 RK 71 between 1971 and 1973 as a possible replacement of the RK 62, but logistics issues prevented its larger adoption by FDF. The rifle was also exported to Qatar.
The Sako S20 is a bolt-action rifle designed and manufactured by Finnish firearms company Sako since 2020. The rifle features an aluminium chassis, which allows for modularity and different configurations, due to which Sako calls it a hybrid rifle.
Sako 85 is a bolt-action rifle produced by the Finnish manufacturer Sako since 2006, and the name signifies that Sako celebrated 85 years that year. The model 85 is marketed as one of Sako's premium models for hunting, and is delivered in many different configurations and chamberings. According to Sako the rifle is available in over 1000 different configurations. Some examples are the Finnlight and Carbonlight models.
The Sako 75 is a bolt-action rifle produced by the Finnish manufacturer Sako from 1996 until it was replaced by its successor, the Sako 85 in 2006, and finally discontinued in 2007.
Sako A7 is a bolt-action rifle made by Sako since 2008, and is meant to fill the gap between premium models such as Sako 85 and the cheaper Tikka T3 model made by the same company. Sako A7 has some technical similarities with both Sako 85 and Tikka T3, but also have some of its own unique design features. The receiver is available in the two action lengths short and medium/long, and is drilled and tapped for mounting a scope rail or scope bases. The bolt has push feed, three locking lugs and a 70 degree bolt lift. The magazine is double-stack staggered-feed, and can be loaded from the top while it sits in the rifle. The magazine also has a locking lever which Sako calls Total Control Latch (TCL). The barrel is free floating, and the trigger is a single stage trigger with adjustable pull weight from 500 to 2000 grams. Sako A7 is delivered with either blued or stainless finish on the receiver and barrel, and was only available with a synthetic stock at its introduction.
Sako Quad is a bolt-action rifle made by the Finnish firearms manufacturer Sako. Quad is delivered in many configurations, and has a quick change barrel system which lets the user swap barrels using a 5 mm hex key. The bolt lift is 50 degrees. Sako Quad factory barrels are delivered chambered for .17 Mach 2, .22 LR, .17 HMR and .22 WMR. There are two types of magazines, one type for the shorter .17 M2 and .22 LR, and another for .17 HMR and .22 WMR. Visually, the Sako Quad has many similarities with Sako Finnfire. The Quad is delivered with a blued receiver and barrel, and the barrels are color coded according to their chambering. In cooperation with Sako, Burris has developed a scope sight with corresponding color coding on its elevation turret to match the ballistics of the different cartridges. The stock is available in either wood or synthetic material. The synthetic stock is available with a rubberized grip. The trigger is adjustable from 500 g to 2000 g.