Sauer 404 | |
---|---|
Type | Bolt-action repeating rifle |
Place of origin | Germany |
Production history | |
Designer | Sauer & Sohn |
Manufacturer | J. P. Sauer & Sohn GmbH |
Specifications | |
Mass | 3220 g (560 mm barrel) |
Length | 1015 to 1125 mm (510 and 620 mm barrel respectively) |
Cartridge | Several, see below |
Action | Bolt-action |
Sights | Proprietary rail |
The Sauer 404 is a lightweight bolt-action rifle manufactured by Sauer & Sohn. The rifle was launched in 2015, [1] and is a direct successor of the Sauer 202. It has a modular construction allowing for easy replacement of components and changing between barrels with different chamberings. This 404 is currently made in a large selection of chamberings and a modular barrel-change system allows changing between chamberings.
While the 404 has a similar appearance to the 202 on the outside, it has several upgrades and updates, and parts are not necessarily compatible. Some differences are that the 404 has a manual cocking lever instead of a push button safety like on the 202. Unlike the 202, the 404 uses the same receiver for magnum and non-magnum cartridges.
With the rifle, Sauer introduced the Sauer Universal Tool, [2] also known as the Sauer Universal Key (SUK) [3] or Sauer Universal-Schlüssel (SUS) in German. This is essentially a 5 mm hex key integrated into the front sling swivel stud, and can be used to disassemble the forend, buttstock, switch barrels or adjust the trigger.
The receiver has no holes for a scope mount, but instead features a new proprietary integrated quick-detach scope mounting system called Sauer Universal Mount, which resembles two NATO rail slots, however the two standards are not compatible. Original and aftermarket scope mounts are available for either scope rail mounts (like the Zeiss inner rail) or traditional ring mounts. The magazine release button can be locked to avoid losing the magazine while hunting.
The trigger weight can be adjusted by the user after the forend has been removed using the included Sauer universal tool or a 5 mm hex key. Pull weight can then be switched between the four different settings of either 550, 750, 1000 or 1250 grams (±50 g), or about 1.2, 1.7, 2.2 and 2.7 pounds respectively. To suit shooters with large or small hands, the end user can also adjust the position of the trigger about 5 millimeters forward or rearward, as well as canting the trigger left or right.
The barrel change system has been renewed, and 404 barrels are not interchangeable with the older 202 barrels. As opposed to the 202, where the whole bolt had to be changed when changing to another cartridge group, only the bolt head is replaced on the Sauer 404. [4]
To disassemble the barrel, the forend must first be removed by unscrewing one screw with either a 5 mm hex key or the Sauer universal tool. To disassemble the barrel, three more screws need to be loosened, also using a 5 mm hex key. Finally, a lever needs to be pulled down 90 degrees to release the barrel, allowing change of chambering or a worn out barrel. The new barrel can be hand tightened, although SIG Sauer recommends tightening the three screws with torque of 5 Newtonmeters (about 45 inch pounds).
Some available factory chamberings are:
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.
The Sauer 202 is a lightweight bolt-action rifle manufactured by Sauer & Sohn in Germany between 1993 and 2015. The rifle was imported to the US by SIG Arms. This rifle has a modular construction which allowed easy replacement of components and caliber changes. This rifle has a modular barrel-change system allows to change between calibers easily, and was offered in a large selection of calibers.
The Blaser R93 is a straight-pull action precision rifle offered in a multitude of calibers and barrel lengths manufactured by the German firearms manufacturer Blaser. Designed by Blasers' designer Mr. Meinhard Zeh in 1993, it had a number of features rare on modern hunting rifles, including a manual cocking system and a proprietary Blaser saddle scope mount for mounting the optic directly to the quick-change barrel.
The ArmaLite AR-30 is a bolt-action rifle manufactured by Armalite. Based in part on Armalite's AR-50 rifle, the AR-30 is available in three cartridges; the .308 Winchester, .300 Winchester Magnum and .338 Lapua. It was introduced at the 2000 SHOT Show.
The SG 550 is an assault rifle manufactured by SIG Sauer AG in Switzerland. "SG" is an abbreviation for Sturmgewehr. The rifle is based on the earlier 5.56×45mm NATO SIG SG 540.
The Sako TRG is a bolt-action sniper rifle line designed and manufactured by Finnish firearms manufacturer SAKO of Riihimäki. It is the successor to the SAKO TR-6 target rifle, and thus the letter G within the rifle's name is meant to represent number 7.
The Ruger M77 is a bolt-action rifle produced by Sturm, Ruger & Co. It was designed by Jim Sullivan during his three years with Ruger. It was designed primarily as a hunting rifle featuring a traditional Mauser K98-style two-lugged bolt with a claw extractor.
The APR is a bolt-action sniper rifle designed by the Thun-based Brügger & Thomet in 2003 as an evolution of the French PGM Précision.
The Barrett Model 98B is a bolt-action sniper rifle chambered in .338 Lapua Magnum and manufactured by Barrett Firearms Manufacturing. The Model 98B was officially announced in October 2008, and became available for sale in early 2009, with an MSRP of $4,495.00.
The CZ-550 is a bolt-action hunting rifle series manufactured by Česká zbrojovka Uherský Brod. The CZ 550 series is available with a medium or magnum sized action. The CZ 550 rifle is based on the Mauser 98 rifle.
The SIG Sauer 200 STR, also known as the SIG Sauer 200 STR Match, is a bolt-action rifle mostly used as a target/competition rifle for national competitions by Norwegian, Swedish and Danish sport shooters. It is a variant of the Sauer 200 TR or SIG Sauer 200 TR Match rifle that features thicker 19 mm (0.75 in) diameter barrels. The 200 STR is produced by J. P. Sauer & Sohn GmbH in Germany.
The Savage 110 BA is a bolt-action sniper/tactical rifle manufactured by Savage Arms. The rifle is designated with an "LE" code; "Law Enforcement". All 110 BA series rifles are configured with AccuTrigger, matte-blued barreled action, fluted heavy free-floating barrel, muzzle brake, oversized bolt handle, external box magazine, magpul adjustable stock, adjustable pistol grip, and three swivel studs for sling and bipod mounting.
The Blaser R8 is a German straight-pull rifle known for its radially locking bolt system, modularity and its barrel mounted scope mount manufactured by Blaser. The rifle also features a manual cocking system and a direct trigger. In 2015 there had been more than 100,000 complete Blaser R8 rifles produced.
The Ruger American Rifle is a family of budget-level hunting/sporting bolt-action centerfire rifle made by Sturm, Ruger & Co., which also produces a line of rimfire rifles with similar designs called the Ruger American Rimfire.
In firearms, barrel threads refer to the screw threads used to attach a barrel.
Sauer 80, 90 and 92 are bolt-action rifles using a non-rotating bolt with rear-locking lugs expanded against matching lugs inside the rear of the action by rotating the bolt handle down. The rifle is known for having a relatively short-for-the-calibre and very smooth bolt travel and has been described as “The most accurate rifle ever made,” and “These are the smoothest actions you will ever cycle. They are remarkably accurate.” but also for being technically more complicated than the “Gold Standard” Mauser 98 bolt action. The early European and Colt models had a very complicated trigger mechanism and this was later changed in production to a standard shotgun single-set trigger to give adequate safety with simplicity and familiarity of use.
SIG Sauer 205 is a bolt-action rifle formerly produced by SIG Sauer. The rifle was produced in several variants for competition shooting and law enforcement.
Sauer 100 is a bolt-action rifle manufactured by Sauer & Sohn that was launched in 2016. It is an entry level rifle from Sauer, and is produced in the same factory and shares many parts with Mauser M18.
Scope mounts are rigid implements used to attach (typically) a telescopic sight or other types of optical sights onto a firearm. The mount can be made integral to the scope body or, more commonly, an external fitting that clamp onto the scope tube via screw-tightened rings. The scope and mount are then fastened onto compatible interfaces on the weapon. Words such as mounts and bases are used somewhat loosely, and can refer to several different parts which are either used together or in place of each other as ways to mount optical sights to firearms.
Schultz & Larsen Legacy is a bolt action rifle manufactured by Schultz & Larsen in Denmark. The receiver is blued, and has integrated mounts for Schultz & Larsen's own "Slide & Lock" sight mounting system. The receiver is also drilled and tapped for installation of other scope mount bases.