Sawyer Skyjacker II

Last updated

Skyjacker II
Role Experimental homebuilt aircraft
National origin United States
DesignerRalph V. Sawyer
StatusProduction completed (1974)
Produced1974
Number builtOne

The Sawyer Skyjacker II is an American homebuilt aircraft that was designed and produced by Ralph V. Sawyer of Lancaster, California, in 1974. The aircraft was intended as a research project and as such only one was built. [1]

Contents

Design and development

The Skyjacker II was designed to explore ultra-low aspect ratio wing designs and in particular the stability, controllability and capability of the configuration. The design was intended to be easily scalable to much larger aircraft. It has no complex curves and was designed to be easy to construct. It features a cantilever mid-wing, a two-seats-in-tandem enclosed cockpit under a glazed canopy, fixed tricycle landing gear with wheel pants and a single engine in pusher configuration. [1]

The aircraft is made from sheet aluminum, has an 18.0 ft (5.5 m) span wing and is powered by a 200 hp (149 kW) Lycoming IO-360-A1B6D engine. The aircraft has an empty weight of 1,650 lb (750 kg) and a gross weight of 2,250 lb (1,020 kg), giving a useful load of 600 lb (270 kg). With full fuel of 50 U.S. gallons (190 L; 42 imp gal) the payload is 300 lb (140 kg). [1] [2]

The aircraft proved to be stall and spin proof. Its standard day, sea level take off run is 1,200 ft (366 m) and landing roll is 1,000 ft (305 m). [1]

The sole example built was registered in the United States with the Federal Aviation Administration in 1974, but its registration was cancelled in August 2013. [3]

Specifications (Skyjacker II)

Data from Plane and Pilot [1]

General characteristics

Performance

Related Research Articles

Piper PA-24 Comanche American four-seat or six-seat, low-wing monoplane built 1956-1972

The Piper PA-24 Comanche is an American four-seat or six-seat, low-wing, all-metal, light aircraft of semimonocoque construction with tricycle retractable landing gear. Piper Aircraft designed and developed the Comanche, which first flew on May 24, 1956. Together with the PA-30 and PA-39 Twin Comanches, it made up the core of the Piper Aircraft lineup until 1972, when the production lines for both aircraft were wiped out in a flood.

Auster Workmaster agricultural monoplane

The Auster J/1U Workmaster is a late 1950s British single-engined single-seat high-wing agricultural monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire. Of traditional high-wing layout, it carries 90 gallons of spray fluid in a tank beside the pilot, an extra seat being provided for a passenger. The Lycoming 0-360-A engine of 180 h.p. driving a McCauley v.p. propeller giving it ample power; and slotted ailerons and balanced tail controls providing good handling. Oversize tyres were fitted. Take-off run at 2,550 lb gross weight and cruising speed at 65 per cent power are respectively 180 yd and 88 miles per hour (142 km/h). Britten-Norman spray gear was provided by Crop Culture, and this company ordered nine Workmasters.

Wickham B

The Wickham B is an American experimental twin engined, homebuilt aircraft.

Ravin 500

The Ravin 500 is a South African amateur-built aircraft, designed and produced by Ravin Aircraft of Pretoria. The aircraft first flew on 15 September 2002 and is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.

Northwest Ranger

The Northwest Ranger was a Canadian bush aircraft that was under development by Northwest Industries (NWI) of Edmonton, Alberta between 1968-1972. The aircraft was a type certified design, and intended to be supplied as a complete ready-to-fly-aircraft.

The Eaves Cougar 1 is an American homebuilt aircraft that was designed by Leonard R. Eaves of Oklahoma City, Oklahoma and made available in the form of plans for amateur construction.

The Southern Aeronautical Renegade is an American Formula V Air Racing homebuilt aircraft that was designed by Charles Lasher and produced by Southern Aeronautical Corporation of Miami Lakes, Florida. The aircraft was supplied in the form of plans for amateur construction, but the plans are apparently no longer available.

The Skipper Scrappy UAC-200 is an American homebuilt aerobatic biplane that was designed by WA Skipper of Greeley, Colorado, introduced in 1970. The aircraft was supplied in the form of plans for amateur construction, but plans seem to no longer be available.

The Rogers Sportaire is an American homebuilt aircraft that was designed David M. Rogers and produced by Rogers Aircraft of Riverside, California, introduced in 1959. The aircraft was supplied in the form of plans for amateur construction, but plans are no longer available. Only one was built.

The Williams-Cangie WC-1 Sundancer is an American homebuilt biplane racing aircraft that was designed by Art Williams and Carl Cangie and built by Ralph Thenhaus in 1974. Plans were at one time available from Williams' company, the Williams Aircraft Design Co of Northridge, California. Only one was built.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

Aircraft Technologies Acro 1

The Aircraft Technologies Acro 1 is an American aerobatic homebuilt aircraft that was designed by Fred Meyer and produced by Aircraft Technologies of Lilburn, Georgia. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. Neither plans nor kits are available anymore and the aircraft is out of production.

The Giles G-200 is an American aerobatic homebuilt aircraft that was produced by AkroTech Aviation of Scappoose, Oregon. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or a kit for amateur construction. AkroTech Aviation went out of business and the design is no longer in production.

The CEI Free Spirit Mk II, also called the Cabrinha Free Spirit Mark II and the Cabrinha Model 423, is a three-seat American homebuilt aircraft that was designed by Richard Cabrinha and produced by CEI of Auburn, California, introduced at AirVenture in 1995. The aircraft was intended to be supplied as a kit for amateur construction, but only prototypes seem to have been completed.

The Express Series 90 is an American homebuilt aircraft that was designed and produced by the Express Aircraft Company of Olympia, Washington, introduced in the late 1980s. When it was available the aircraft was supplied as a kit for amateur construction.

SkyDancer SD-260

The SkyDancer SD-260 was an American aerobatic Homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.

The Starfire Firebolt, sometimes called the Starfire Firebolt Convertible, due to its removable canopy, is an American homebuilt aerobatic biplane that was designed by G. H. "Mac" McKenzie and produced by Starfire Aviation of Tempe, Arizona. When it was available the aircraft was supplied in the form of plans for amateur construction, with some pre-fabricated parts available.

The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

Bede BD-12

The Bede BD-12 was an American homebuilt aircraft designed by Jim Bede and produced by Bede Aircraft of Medina, Ohio, introduced in the 1990s. The aircraft was intended to be supplied as a kit for amateur construction, but only one was ever built.

Brutsche Freedom 210 STOL

The Brutsche Freedom 210 STOL was a proposed American STOL homebuilt aircraft that was designed by Neal H. Brutsche and intended to be produced by Brutsche Aircraft Corporation of Salt Lake City, Utah, introduced in the mid-1990s. The aircraft was planned to be supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 Plane and Pilot: 1978 Aircraft Directory, page 152. Werner & Werner Corp, Santa Monica CA, 1977. ISBN   0-918312-00-0
  2. Aerofiles (n.d.). "American airplanes: Sa - Si" . Retrieved 18 October 2013.
  3. Federal Aviation Administration (18 October 2013). "N-Number Inquiry Results - N7317" . Retrieved 18 October 2013.