Condor | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Seahawk Industries Condor Aircraft |
Status | Production completed |
Developed from | Eipper Quicksilver |
The Seahawk Condor is an American ultralight aircraft that was designed by Buddy Head, Bob Carswell and Dave French and produced by Seahawk Industries and later by Condor Aircraft. The aircraft was supplied as a kit for amateur construction. [1] [2]
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 240 lb (109 kg). It features a cable-braced high-wing, open cockpit, tricycle landing gear and a single engine in pusher configuration. The aircraft closely resembles the contemporary Quicksilver MX. [1] [2]
The aircraft is made from bolted-together aluminum tubing, with the wings and tail surfaces covered in Dacron sailcloth. Its 32 ft (9.8 m) span wing is cable-braced from a single tube kingpost. The landing gear does not incorporate suspension. The standard powerplant supplied was the Kawasaki 440 which produces 40 hp (30 kW). The aircraft has a power-off glide ratio of 7:1. [1]
The reported assembly time from the factory-supplied kit is 75 hours. [2]
The aircraft was produced in two versions, the Condor II and III. [1]
Data from Cliche [1]
General characteristics
Performance
The RagWing RW7 Duster is a single seat, low wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.
The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.
The Cloudbuster Ultralights Cloudbuster is an American ultralight aircraft that was designed and produced by the Cloudbuster Ultralights Company of Sarasota, Florida in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.
The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.
The Advanced Aviation Husky, Hi-Nuski and Coyote are a family of American ultralight aircraft that was designed and produced by Advanced Aviation. The aircraft was supplied as a kit for amateur construction and introduced in 1978.
The Cascade Kasperwing I-80 is an American ultralight flying wing motorglider that was designed by Witold Kasper and Steve Grossruck. It was produced by Cascade Ultralites and introduced in 1976. The aircraft was supplied as a kit for amateur construction.
The Manta Foxbat is an American ultralight aircraft that was designed by Bill Armour and produced by Manta Products Inc of Oakland, California. The aircraft was supplied as a kit for amateur construction.
The Ultralight Flight Mirage is an American ultralight aircraft that was designed by Frank Riley and produced by Ultralight Flight Inc. The aircraft was supplied as a kit for amateur construction.
The Golden Gate Mosquito is an American ultralight aircraft that was produced by Golden Gate Aviation. The aircraft was supplied as a kit for amateur construction.
The Rotec Panther is an American ultralight aircraft that was designed and produced by Rotec Engineering, introduced in 1984. The aircraft was supplied as a kit for amateur construction.
The Worldwide Skyraider S/S, also called the SkyRaider S/S, is an American ultralight aircraft that was designed and produced by Worldwide Ultralite Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Bell Sidewinder is an American ultralight aircraft, supplied as a kit for amateur construction.
The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.
The Skye Treck Skyseeker is a Canadian ultralight aircraft that was designed and produced by Skye Treck of Manitoba. The aircraft was supplied as a kit for amateur construction.
The Star Flight Starfire is the first aircraft in a large family of American ultralight aircraft that was designed by Dick Turner and produced by Star Flight Manufacturing, introduced in 1979. The aircraft were all supplied as kits for amateur construction.
The Teratorn T/A is an American ultralight aircraft that was designed and produced by Teratorn Aircraft. The aircraft was supplied as a kit for amateur construction.
The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.
The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.
The Ultralite Soaring Wizard is an American ultralight aircraft that was designed and produced by Ultralite Soaring Inc. The aircraft was supplied as a kit for amateur construction.