Sisyphus cooling

Last updated
Physical principle of Sisyphus cooling: The atoms are running against the potential energy, become excited into a higher band, fall back into a low-energy state (i.e. from the rather high "blue" state upwards, then immediately backwards to the lower "red" state), always on the left-hand side, from which, after one and a half of the "red" or "blue" period, say, of the laser action, they get excited and de-excited again, now from "red" to "blue", on the r.h.s., etc. Sisyphus.svg
Physical principle of Sisyphus cooling: The atoms are running against the potential energy, become excited into a higher band, fall back into a low-energy state (i.e. from the rather high "blue" state upwards, then immediately backwards to the lower "red" state), always on the left-hand side, from which, after one and a half of the "red" or "blue" period, say, of the laser action, they get excited and de-excited again, now from "red" to "blue", on the r.h.s., etc.

In ultra-low-temperature physics, Sisyphus cooling, the Sisyphus effect, or polarization gradient cooling involves the use of specially selected laser light, hitting atoms from various angles to both cool and trap them in a potential well, effectively rolling the atom down a hill of potential energy until it has lost its kinetic energy. It is a type of laser cooling of atoms used to reach temperatures below the Doppler cooling limit. This cooling method was first proposed by Claude Cohen-Tannoudji in 1989, [1] motivated by earlier experiments which observed sodium atoms cooled below the Doppler limit in an optical molasses. [2] Cohen-Tannoudji received part of the Nobel Prize in Physics in 1997 for his work. The technique is named after Sisyphus, a figure in the Greek mythology who was doomed, for all eternity, to roll a stone up a mountain only to have it roll down again whenever he got it near the summit.

Contents

Method

Sisyphus cooling can be achieved by shining two counter-propagating laser beams with orthogonal polarization onto an atom sample. Atoms moving through the potential landscape along the direction of the standing wave lose kinetic energy as they move to a potential maximum, at which point optical pumping moves them back to a lower energy state, thus lowering the total energy of the atom. This description of Sisyphus cooling is largely based on Foot's description. [3]

Principle of Sisyphus cooling

The counter-propagation of two orthogonally polarized lasers generates a standing wave in polarization with a gradient between (left-hand circularly polarized light), linear, and (right-hand circularly polarized light) along the standing wave. Note that this counter propagation does not make a standing wave in intensity, but only in polarization. This gradient occurs over a length scale of , and then repeats, mirrored about the y-z plane. At positions where the counter-propagating beams have a phase difference of , the polarization is circular, and where there is no phase difference, the polarization is linear. In the intermediate regions, there is a gradient ellipticity of the superposed fields.

Consider, for example, an atom with ground state angular momentum and excited state angular momentum . The sublevels for the ground state are

and the levels for the excited state are

In the field-free case, all of these energy levels for each J value are degenerate, but in the presence of a circularly polarized light field, the Autler-Townes effect, (AC Stark shift or light shift), lifts this degeneracy. The extent and direction of this lifted degeneracy is dependent on the polarization of the light. It is this polarization dependence that is leveraged to apply a spatially-dependent slowing force to the atom.

Typical optical pumping scheme

In order to have a cooling effect, there must be some dissipation of energy. Selection rules for dipole transitions dictate that for this example, and with relative intensities given by the square of the Clebsch-Gordan coefficients. Suppose we start with a single atom in the ground state, , in the state at with velocity in the +z direction.

The atom is now pumped to the excited state, where it spontaneously emits a photon and decays to the ground state. The key concept is that in the presence of light, the AC stark shift lowers the further in energy than the state. In going from the to the state, the atom has indeed lost in energy, where approximately equal to the AC Stark shift where omega is the Rabi frequency and delta is the detuning.

At this point, the atom is moving in the +z direction with some velocity, and eventually moves into a region with light. The atom, still in its state that it was pumped into, now experiences the opposite AC Stark shift as it did in - light, and the state is now lower in energy than the state. The atom is pumped to the excited state, where it spontaneously emits a photon and decays to the state. As before, this energy level has been lowered by the AC Stark shift, and the atom loses another of energy.

Repeated cycles of this nature convert kinetic energy to potential energy, and this potential energy is lost via the photon emitted during optical pumping.

Limits

The fundamental lower limit of Sisyphus cooling is the recoil temperature, , set by the energy of the photon emitted in the decay from the J' to J state. This limit is though practically the limit is a few times this value because of the extreme sensitivity to external magnetic fields in this cooling scheme. Atoms typically reach temperatures on the order of , as compared to the doppler limit .

Related Research Articles

<span class="mw-page-title-main">Stimulated emission</span> Release of a photon triggered by another

Stimulated emission is the process by which an incoming photon of a specific frequency can interact with an excited atomic electron, causing it to drop to a lower energy level. The liberated energy transfers to the electromagnetic field, creating a new photon with a frequency, polarization, and direction of travel that are all identical to the photons of the incident wave. This is in contrast to spontaneous emission, which occurs at a characteristic rate for each of the atoms/oscillators in the upper energy state regardless of the external electromagnetic field.

<span class="mw-page-title-main">Stefan–Boltzmann law</span> Physical law on the emissive power of black body

The Stefan–Boltzmann law, also known as Stefan's law, describes the intensity of the thermal radiation emitted by matter in terms of that matter's temperature. It is named for Josef Stefan, who empirically derived the relationship, and Ludwig Boltzmann who derived the law theoretically.

<span class="mw-page-title-main">Laser cooling</span>

Laser cooling includes several techniques where atoms, molecules, and small mechanical systems are cooled with laser light. The directed energy of lasers is often associated with heating materials, e.g. laser cutting, so it can be counterintuitive that laser cooling often results in sample temperatures approaching absolute zero. It is a routine step in many atomic physics experiments where the laser-cooled atoms are then subsequently manipulated and measured, or in technologies, such as atom-based quantum computing architectures. Laser cooling relies on the change in momentum when an object, such as an atom, absorbs and re-emits a photon. For example, if laser light illuminates a warm cloud of atoms from all directions and the laser's frequency is tuned below an atomic resonance, the atoms will be cooled. This common type of laser cooling relies on the Doppler effect where individual atoms will preferentially absorb laser light from the direction opposite to the atom's motion. The absorbed light is re-emitted by the atom in a random direction. After repeated emission and absorption of light the net effect on the cloud of atoms is that they will expand more slowly. The slower expansion reflects a decrease in the velocity distribution of the atoms, which corresponds to a lower temperature and therefore the atoms have been cooled. For an ensemble of particles, their thermodynamic temperature is proportional to the variance in their velocity, therefore the lower the distribution of velocities, the lower temperature of the particles.

<span class="mw-page-title-main">Synchrotron light source</span> Particle accelerator designed to produce intense x-ray beams

A synchrotron light source is a source of electromagnetic radiation (EM) usually produced by a storage ring, for scientific and technical purposes. First observed in synchrotrons, synchrotron light is now produced by storage rings and other specialized particle accelerators, typically accelerating electrons. Once the high-energy electron beam has been generated, it is directed into auxiliary components such as bending magnets and insertion devices in storage rings and free electron lasers. These supply the strong magnetic fields perpendicular to the beam that are needed to stimulate the high energy electrons to emit photons.

Resolved sideband cooling is a laser cooling technique allowing cooling of tightly bound atoms and ions beyond the Doppler cooling limit, potentially to their motional ground state. Aside from the curiosity of having a particle at zero point energy, such preparation of a particle in a definite state with high probability (initialization) is an essential part of state manipulation experiments in quantum optics and quantum computing.

<span class="mw-page-title-main">Radiation zone</span> Radiative layer of stars

A radiation zone, or radiative region, is a layer of a star's interior where energy is primarily transported toward the exterior by means of radiative diffusion and thermal conduction, rather than by convection. Energy travels through the radiation zone in the form of electromagnetic radiation as photons.

In condensed matter physics and atomic physics, the recoil temperature is a fundamental lower limit of temperature attainable by some laser cooling schemes. When an atom decays from an excited electronic state at rest to a lower energy electronic state by the spontaneous emission of a photon, due to conservation of momentum, the atom gains momentum equivalent to the momentum of the photon. This kinetic energy gain corresponds to the recoil temperature of the atom. The recoil temperature is

Quantum noise is noise arising from the indeterminate state of matter in accordance with fundamental principles of quantum mechanics, specifically the uncertainty principle and via zero-point energy fluctuations. Quantum noise is due to the apparently discrete nature of the small quantum constituents such as electrons, as well as the discrete nature of quantum effects, such as photocurrents.

<span class="mw-page-title-main">Optical molasses</span> Laser technique cooling atoms to temperatures lower than a magneto-optical trap

Optical molasses is a laser cooling technique that can cool neutral atoms to as low as a few microkelvin, depending on the atomic species. An optical molasses consists of 3 pairs of counter-propagating orthogonally polarized laser beams intersecting in the region where the atoms are present. The main difference between an optical molasses (OM) and a magneto-optical trap (MOT) is the absence of magnetic field in the former. Unlike a MOT, an OM provides only cooling and no trapping.

<span class="mw-page-title-main">Doppler cooling</span> Laser cooling technique

Doppler cooling is a mechanism that can be used to trap and slow the motion of atoms to cool a substance. The term is sometimes used synonymously with laser cooling, though laser cooling includes other techniques.

<span class="mw-page-title-main">Magneto-optical trap</span> Apparatus for trapping and cooling neutral atoms

In atomic, molecular, and optical physics, a magneto-optical trap (MOT) is an apparatus which uses laser cooling and a spatially-varying magnetic field to create a trap which can produce samples of cold, neutral atoms. Temperatures achieved in a MOT can be as low as several microkelvin, depending on the atomic species, which is two or three times below the photon recoil limit. However, for atoms with an unresolved hyperfine structure, such as 7Li, the temperature achieved in a MOT will be higher than the Doppler cooling limit.

In condensed matter physics, an ultracold atom is an atom with a temperature near absolute zero. At such temperatures, an atom's quantum-mechanical properties become important.

In spectroscopy, the Autler–Townes effect, is a dynamical Stark effect corresponding to the case when an oscillating electric field is tuned in resonance to the transition frequency of a given spectral line, and resulting in a change of the shape of the absorption/emission spectra of that spectral line. The AC Stark effect was discovered in 1955 by American physicists Stanley Autler and Charles Townes.

Resonance fluorescence is the process in which a two-level atom system interacts with the quantum electromagnetic field if the field is driven at a frequency near to the natural frequency of the atom.

The manipulation of atoms using optical fields is a vital and fundamental area of research within the field of atomic physics. This research revolves around leveraging the distinct characteristics of laser light and coherent optical fields to achieve precise control over various aspects of atomic systems. These aspects encompass regulating atomic motion, positioning atoms, manipulating internal states, and facilitating intricate interactions with neighboring atoms and photons. The utilization of optical fields provides a powerful toolset for exploring and understanding the quantum behavior of atoms and opens up promising avenues for applications in atomic, molecular, and optical physics.

In atomic physics, Raman cooling is a sub-recoil cooling technique that allows the cooling of atoms using optical methods below the limitations of Doppler cooling, Doppler cooling being limited by the recoil energy of a photon given to an atom. This scheme can be performed in simple optical molasses or in molasses where an optical lattice has been superimposed, which are called respectively free space Raman cooling and Raman sideband cooling. Both techniques make use of Raman scattering of laser light by the atoms.

Sub-Doppler cooling is a class of laser cooling techniques that reduce the temperature of atoms and molecules below the Doppler cooling limit. In experiment implementation, Doppler cooling is limited by the broad natural linewidth of the lasers used in cooling. Regardless of the transition used, however, Doppler cooling processes have an intrinsic cooling limit that is characterized by the momentum recoil from the emission of a photon from the particle. This is called the recoil temperature and is usually far below the linewidth-based limit mentioned above.

Gray molasses is a method of sub-Doppler laser cooling of atoms. It employs principles from Sisyphus cooling in conjunction with a so-called "dark" state whose transition to the excited state is not addressed by the resonant lasers. Ultracold atomic physics experiments on atomic species with poorly-resolved hyperfine structure, like isotopes of lithium and potassium, often utilize gray molasses instead of Sisyphus cooling as a secondary cooling stage after the ubiquitous magneto-optical trap (MOT) to achieve temperatures below the Doppler limit. Unlike a MOT, which combines a molasses force with a confining force, a gray molasses can only slow but not trap atoms; hence, its efficacy as a cooling mechanism lasts only milliseconds before further cooling and trapping stages must be employed.

The Dicke model is a fundamental model of quantum optics, which describes the interaction between light and matter. In the Dicke model, the light component is described as a single quantum mode, while the matter is described as a set of two-level systems. When the coupling between the light and matter crosses a critical value, the Dicke model shows a mean-field phase transition to a superradiant phase. This transition belongs to the Ising universality class and was realized in cavity quantum electrodynamics experiments. Although the superradiant transition bears some analogy with the lasing instability, these two transitions belong to different universality classes.

Polarization gradient cooling is a technique in laser cooling of atoms. It was proposed to explain the experimental observation of cooling below the doppler limit. Shortly after the theory was introduced experiments were performed that verified the theoretical predictions. While Doppler cooling allows atoms to be cooled to hundreds of microkelvin, PG cooling allows atoms to be cooled to a few microkelvin or less.

References

  1. Dalibard, J.; Cohen-Tannoudji, C. (1989). "Laser cooling below the Doppler limit by polarization gradients: simple theoretical models". Journal of the Optical Society of America B. 6 (11): 2023. Bibcode:1989JOSAB...6.2023D. doi:10.1364/josab.6.002023.
  2. Lett, Paul D.; Watts, Richard N.; Westbrook, Christoph I.; Phillips, William D.; Gould, Phillip L.; Metcalf, Harold J. (1988). "Observation of atoms laser cooled below the Doppler limit". Phys. Rev. Lett. 61 (2): 169–172. Bibcode:1988PhRvL..61..169L. doi: 10.1103/PhysRevLett.61.169 . PMID   10039050.
  3. Foot, C.J. (2005). Atomic Physics. Oxford University Press. Section 9.6. ISBN   9780198506966.