Smith & Wesson Model 64 | |
---|---|
Type | Revolver |
Place of origin | United States |
Service history | |
Used by | NYPD |
Production history | |
Designed | 1970 |
Manufacturer | Smith & Wesson |
Unit cost | $689 |
Produced | 1970–October 2021 |
Variants | Military & Police, Double Action Only (DAO) |
Specifications | |
Cartridge | .38 Special |
Barrels | 2, 3, and 4 inches. The 6 inch was rare. |
Action | Single/Double action or Double action only (DAO) |
Feed system | 6 shot cylinder |
The Smith & Wesson Model 64Military and Police revolver is the stainless steel version of the Model 10.
The Model 64 is a six-shot double-action revolver with fixed sights chambered in .38 Special. It was the second all stainless steel revolver made by Smith & Wesson, the first being the Smith & Wesson Model 60. [1] It was widely used by several U.S. police, sheriff and state agencies and was a popular choice in high humidity states because the stainless model 64 was more corrosion and rust resistant than the blued Model 10. [2]
Originally offered in two variants, a 4" taper barrelled square butt or a 2" round butt, the Model 64 has since been offered in numerous configurations. [2] The 4" heavy barelled version, introduced in 1974, became a favorite with many police agencies. [1] Five variants were made for NYPD and these revolvers are marked "NY1" as opposed to the more common "NYCPD" marking for department issued guns as these were intended to be purchased by individual officers. [3] It was one of the two stainless steel revolvers authorized for use by NYPD, (the other being the Ruger Service-Six) as well as one of the last revolvers approved for use being replaced by 9mm semiautomatic pistols in 1993. [3]
Noted for its accuracy, dependability and manageable recoil, the Model 64 is still in use for security, inmate transportation (Corrections), target shooting, formal target competition and personal defense. [4]
The Smith & Wesson Model 500 is a five-shot, double/single action large-caliber revolver produced by Smith & Wesson, firing the .500 S&W Magnum cartridge.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most-produced handgun of the 20th century.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.
In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or similar space.
The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.
The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.
S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"
SIG Sauer of Newington, NH United States manufactures a full line of 1911 styled handguns. The earliest models were very faithful to the John M. Browning designed Colt M1911 Pistol which became the United States standard sidearm and served in that capacity for some seven decades before being replaced by the Beretta M9 handgun.
The Smith & Wesson Model 60 revolver is a 5-shot revolver that is chambered in either .38 Special or .357 Magnum calibers. It was the first revolver produced from stainless steel.
The Smith & Wesson 340PD is an ultra-light J-frame five shot snubnosed revolver chambered for .357 Magnum.
The Smith & Wesson Model 36 is a revolver chambered for .38 Special. It is one of several models of J-frame revolvers. It was introduced in 1950, and is still in production in the classic blued Model 36 and the stainless steel Model 60.
The Smith & Wesson Model 640 revolver is a 5-shot snubnosed revolver that is chambered in either .38 Special or .357 Magnum caliber introduced in 1989. Like other "J-frame" Smith & Wesson revolvers, it has a swing-out cylinder, but this model features a concealed hammer, and is part of the Centennial line.
The Smith & Wesson 645 and Smith & Wesson 745 are second-generation semi-automatic pistols which predate Smith & Wesson's 4500 series of handguns. The S&W 645/745 is chambered for the .45 ACP cartridge. The S&W 645 is constructed almost entirely from stainless steel and is thus extremely resistant to harsh weather conditions, whereas the S&W 745 has a stainless steel frame and a blued carbon steel slide. The S&W 645 was introduced in 1985 and discontinued in 1988. The S&W 745 was produced from 1986 to 1990, primarily as a single-action competition gun for IPSC shooting.
The Smith & Wesson Model 646 is a six-shot, double-action revolver chambered for the .40 S&W pistol cartridge, manufactured in 2000 and 2003 by the United States company Smith & Wesson.
The Smith & Wesson Model 52, sometimes referred to as the 38 Master, is a semi-automatic pistol developed by Smith & Wesson for Bullseye shooting. It was one of the first semiautomatic pistols chambered in .38 Special with flush-seated, full wadcutter bullets. The shape of the rimmed cartridge limited the magazine capacity to five rounds. A variant, known as the Model 952, in 9 mm Parabellum, is still produced in limited quantities by Smith & Wesson's Performance Center. The Model 52 was discontinued in 1993 when the machinery to manufacture the pistol broke down and it was deemed too costly to replace.
The Smith & Wesson Bodyguard is a family of small J-frame revolvers with shrouded hammers manufactured by Smith & Wesson. They are available chambered in either .38 Special or .357 Magnum.