Spencer 1882 | |
---|---|
Type | Pump-action shotgun |
Place of origin | United States |
Production history | |
Designer | Christopher M. Spencer and Sylvester H. Roper [1] |
Designed | Circa April 1882 [1] |
Manufacturer | Spencer Arms Company, Francis Bannerman & Sons |
Produced | 1882-1889/1892, 1890-1907; introduced to markets in 1883 [2] [1] |
No. built | 20,000 (by Spencer Arms Company before 1892) [1] |
Specifications | |
Cartridge | 10 gauge, 12 gauge [3] |
Action | Pump-action |
Feed system | 5 or 8 rounds (depending on version) tubular magazine |
Spencer 1882 is a pump-action shotgun designed by Christopher Miner Spencer and Sylvester Howard Roper, which was produced by the former's Spencer Arms Company from 1882 to 1889 or 1892, and subsequently by Francis Bannerman & Sons from 1890 to 1907. The design is credited as the first commercially successful pump-action shotgun to be the released to the markets, preceding John Browning's Winchester Model 1893 and Model 1897. [4] [5] [6] [7] [8]
Christopher Miner Spencer had made a name for himself with the Spencer repeating rifle, which would be equipped by Union Soldiers in late stages of the American Civil War. [9] However, his original company - Spencer Repeating Rifle Company - went out of business following the war, mainly due to there being so many military surplus rifles around. In 1868, he declares bankruptcy and his assets were acquired by Oliver Winchester. [10]
Afterwards, he went on to work for Roper Repeating Arms Company in Massachusetts, which too would collapse in 1869. While working at Roper's Arms Company, he would meet Charles E. Billings, who would be instrumental in reviving Spencer's businesses. Initially forming Billings & Spencer, their business produced machine tools, before in 1882, Spencer started his new company - Spencer Arms Company - in Windsor, Connecticut. [11] [2]
Spencer would seek out Roper, the latter who is noted to have discovered shotgun choke. This would lay foundation in the designing of the Spencer 1882. Patented in April 1882, the Spencer 1882 would be introduced to American firearms markets in 1883. [4] [1] Although the Spencer 1882 sold well, the weapon was expensive to manufacture and was not profitable enough to keep Spencer's company afloat. [3] [12] [11]
Spencer's manufacturing would again be in financial trouble and debt, which forced him to sell the shotgun's patents to Francis Bannerman in 1885. According to Leroy Thompson, estimated 20,000 Spencer 1882 shotguns were made before Spencer Arms Company ended their production in 1892. [1]
In 1890, Bannerman would buy out Spencer's company, and under his company - Francis Bannerman & Sons - would continue the manufacture of the Spencer 1882. The guns manufactured under his tenure having the Bannerman name in the side of the gun's action. [4]
In 1893, Winchester would release the Model 1893 pump-action shotgun, designed by John Browning, which would prompt Bannerman to sue Winchester and everyone associated with the Model 1893's designs. However, Winchester cited that they had found pump-action design patents from England, dated prior to 1882, as well as another one from France, which caused the judge to toss out Bannerman's lawsuit. [4] [13]
Winchester's Model 1893 and 1897 began harming the sales of the Spencer 1882, which resulted in Bannerman to cease the production of the Spencer shotgun in 1907. [4] [13]
The Spencer 1882 is an early example of pump-action shotgun. It is a hammerless design and uses an unrefined and complex cycling design in which the toggle breech pivots up and down when cycling. [1] [4]
Unlike modern pump-action shotguns, the Spencer 1882 was designed with two triggers. The back trigger is meant for firing, with the second one mounted in front of the former, was meant to re-cock the weapon in case of a cartridge malfunction. The time when Spencer 1882 was manufactured, paper-cased shells and hand-loads were still used, which were inconsistent in terms of reliability. [4]
The Spencer 1882 uses a spring-mounted ejector that's situated in front of the right-side action bar, that catches the dispensed shell and draws it out of the gun from the concave top of the pivoted bolt. In the process, a new shell springs from the magazine into the cutout in the bottom of the toggle. The final rearward pumping makes the breech flap to rotate rapidly again, loading the shell forward and out of the breech top. [1] [4]
Much like modern, conventional pump-action shotgun designs, the Spencer 1882 holds its shells in a tubular magazine beneath the barrel. It is also loaded by pulling the fore-grip back, which will clear the magazine-tube to be loaded. The fore-grip then needs to be cycled to send the shell into the chamber of the shotgun. Depending on the length of the Spencer 1882 variant sold, it's magazine capacity is either five or eight 12 gauge shells. [4] [1] [2]
Even though it is regarded as the first successful pump-action shotgun, how it was received by its users during contemporary time remains unclear. According to Leroy Thompson, it was popular enough to be used by unspecified prison services, as well as in very limited combat capacity. [1] Annie Oakley owned a Spencer 1882 shotgun, which was one of her favorite firearms. [14] [15] [16]
From a retrospective view, Spencer 1882 is regarded as a trailblazer for pump-action shotguns. However, modern commentators find the Spencer 1882 to be somewhat awkward to use and/or unpleasant to fire. [4] This is further commented on by Michael McIntosh in his book "Shotguns and Shooting Three", in which he states that: "The Spencer, patented in April 1882 was the first successful [pump-action]; Winchester Model 1897 was the first truly great one." [17]
In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.
In firearms terminology, an action is the functional mechanism of a breechloading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.
John Moses Browning was an American firearm designer who developed many varieties of military and civilian firearms, cartridges, and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating, semi-automatic, and automatic firearms.
Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.
Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".
The Winchester Model 1897, also known as the Model 97, M97, Riot Gun, or Trench Gun, is a pump-action shotgun with an external hammer and tube magazine manufactured by the Winchester Repeating Arms Company. The Model 1897 was an evolution of the Winchester Model 1893 designed by John Browning. From 1897 until 1957, over one million of these shotguns were produced. The Model 1897 was offered in numerous barrel lengths and grades, chambered in 12 and 16 gauge, and as a solid frame or takedown. The 16-gauge guns had a standard barrel length of 28 in (71 cm), while 12-gauge guns were furnished with 30 in (76 cm) barrels. Special length barrels could be ordered in lengths as short as 20 in (51 cm) or as long as 36 in (91 cm). Since the time the Model 1897 was first manufactured, it has been used to great effect by American military personnel, law enforcement officers, and hunters.
A repeating rifle is a single-barreled rifle capable of repeated discharges between each ammunition reload. This is typically achieved by having multiple cartridges stored in a magazine and then fed individually into the chamber by a reciprocating bolt, via either a manual or automatic action mechanism, while the act of chambering the round typically also recocks the hammer/striker for the following shot. In common usage, the term "repeating rifle" most often refers specifically to manual repeating rifles, as opposed to self-loading rifles, which use the recoil, gas, or blowback of the previous shot to cycle the action and load the next round, even though all self-loading firearms are technically a subcategory of repeating firearms.
A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.
A magazine, often simply called a mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun or externally attached. The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip", although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into a magazine or cylinder.
Pump action is a type of manual firearm action that is operated by moving a sliding handguard on the gun's forestock. When shooting, the sliding forend is pulled rearward to eject any expended cartridge and typically to cock the hammer or striker, and then pushed forward to load a new cartridge into the chamber. Most pump-action firearms use an integral tubular magazine, although some do use detachable box magazines. Pump-action firearms are typically associated with shotguns, although it has also been used in rifles, grenade launchers, and other types of firearms. A firearm using this operating mechanism is colloquially referred to as a pumpgun.
The Winchester Repeating Arms Company was a prominent American manufacturer of repeating firearms and ammunition. The firm was established in 1866 by Oliver Winchester and was located in New Haven, Connecticut. The firm went into receivership in 1931 and was bought by the Western Cartridge Company, a forerunner of the Olin Corporation. The Winchester brand name is still owned by the Olin Corporation, which makes ammunition under that name. The Winchester name is also used under license for firearms produced by two subsidiaries of the Herstal Group – FN Herstal of Belgium and the Browning Arms Company of Ogden, Utah.
The Winchester Model 1887 and Winchester Model 1901 are lever-action shotguns designed by American gun designer John Browning and produced by the Winchester Repeating Arms Company during the late 19th and early 20th centuries. The shotgun became well-known due to its use in the 1991 film Terminator 2: Judgment Day.
Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.
A hammerless firearm is a firearm that lacks an exposed hammer or hammer spur. Although it may not literally lack a hammer, it lacks an external hammer that the user can manipulate directly. One of the disadvantages of an exposed hammer spur is the tendency for it to get caught on items such as clothing; covering the hammer by removing the hammer spur reduces this from occurring.
Break action is a type of firearm action in which the barrel(s) are hinged much like a door and rotate perpendicularly to the bore axis to expose the breech and allow loading and unloading of cartridges. A separate operation may be required for the cocking of a hammer to fire the new round. There are many types of break-action firearms; break actions are universal in double-barreled shotguns, double-barreled rifles, combination guns, and are commonly found in single shot pistols, rifles, shotguns, including flare guns, grenade launchers, air guns, and some older revolver designs. They are also known as hinge-action, break-open, break-barrel, break-top, or, on old revolvers, top-break actions.
The Model 1200 is a pump-action shotgun that was manufactured by the Winchester-Western Division of Olin Corporation, starting 1964. It was redesignated the Model 1300 in 1978 with minimal changes. Production ceased in 2006 when the U.S. Repeating Arms Company, the subsequent manufacturer, went bankrupt. A militarized version of the Model 1200 was acquired by the U.S. Army for use during the Vietnam War. It is still in active service within various conflicts throughout the 21st century.
The Winchester Model 1890 is a slide-action repeating rifle produced by the Winchester Repeating Arms Company in the late 19th and early 20th century.
The Winchester Model 1893, commonly known as Model 93, is an American hammer-action pump-action shotgun designed by John Browning and his brother Matthew, and was produced by the Winchester Repeating Arms Company from May 1893 to June 1897.
Christopher Miner Spencer was an American inventor, from Manchester, Connecticut, who invented the Spencer repeating rifle, one of the earliest models of lever-action rifle, a steam powered "horseless carriage", and several other inventions. He developed the first fully automatic turret lathe, which in its small- to medium-sized form is also known as a screw machine.
A repeating firearm or repeater is any firearm that is designed for multiple, repeated firings before the gun has to be reloaded with new ammunition.
It was Christopher Spencer, best known for the Civil War-era Spencer Repeating Rifle, who joined with Sylvester Roper to design a slide-action repeating shotgun, which was patented in April 1882. Spencer formed the Spencer Arms Company and in 1883 offered the first slide-action shotgun for sale. These early Spencer shotguns used a five-shot tubular magazine and were hammerless. However, the Spencer was more expensive than the double-barreled shotgun. As a result, only about 20,000 had been assembled prior to 1892, when [original production] ceased. Spencer shotguns had been intended as hunting arms, though few were used at prisons or elsewhere in a combat role.
The success he had known with the Spencer carbine led to the 1882 establishment in Windsor, Connecticut, of the Spencer Arms Company. What Spencer sought to do this time around was to create a revolving-magazine shotgun. It would be the first slide-action (or pump-action) shotgun and would be available in both 10-gauge and 12-gauge caliber. The weapon, however, proved too expensive to manufacture.
Until 1890 all firearms of Winchester manufacture were of the lever action type, except the Hotchkiss repeating rifle (Winchester M/1883). Christopher M. Spencer, who early in 1860 patented his lever action, rim fire, repeating rifle that competed with B. Tyler Henry's rifle of the same year and of similar type, came back into the firearms business with his new Spencer slide action, repeating shotgun in 1882. These guns were made by the Spencer Arms Company of Windsor, Connecticut.
Nevertheless in America, where the magazine rifle had had singular success, gunmakers designed repeating shotguns, although the bulky cardboard cases of the cartridges passing through the actions caused some difficulties. One of the first successful designs was patented by C. M. Spencer and S. H. Roper in 1882. This was a slide or pump-action model. Five cartridges housed in a tubular magazine under the barrel were brought into the barrel one by one by the left hand moving a handle back towards the trigger.