Spitfire Mark I

Last updated
Mark I
Roleutility helicopter
National originUnited States
Manufacturer Spitfire Helicopters Inc.
First flightDecember 1978 [1]
Developed from Enstrom F-28

The Spitfire Mark I was a utility helicopter built in the United States in the late 1970s and intended for series production. [2] [3] [4] In essence, the Mark I was an Enstrom F-28 that was modified to use an Allison 250 turboshaft engine and geared transmission in place of the original piston engine and system of vee belts. [4] The resulting powerplant installation was lighter and more compact, which allowed for additional cargo or fuel. [4]

Contents

Spitfire Helicopters' parent company, Fetsko Aviation Sales and Transportation began work on the prototype in January 1976, and on a number of pre-production aircraft in February 1977. [4] Fetsko displayed a mockup of the concept at the National Maintenance and Operations Meeting at Reading, Pennsylvania in June 1976. [5]

The prototype (registered N4890 [3] ) first flew in December 1978. By May 1979, Spitfire had supplemental approval for the turbine conversion [6] and by July, the company reported that it had sold 42 examples [7] of the Mark I and Mark II and expected to build 60 aircraft during 1980. [7] The engine installation on production models was to be slightly further forward than on the prototype. [7]

However, Spitfire remained dependent on Enstrom to supply airframes for remanufacture, [6] [8] and Enstrom distanced itself from the project somewhat. [9] Competing plans by Enstrom and Spitfire to market Polish-built Mil Mi-2 helicopters in the United States might have contributed to the friction. [8] In Spitfire's version of the deal, Polish manufacturer PZL-Świdnik would also contribute to the Spitfire manufacturing efforts. [8] By November 1979, Enstrom refused to supply airframes to Spitfire. [10]

The situation improved somewhat in the 1980s, and Spitfire president Jack Fetsko reported in May 1983 that relations with Enstrom had improved to the point where the two companies could "talk programs". [11] By that time, costs had increased from $US 165,000 expected in 1979 [1] to $US 285,000 [11] but Spitfire had taken deposits for 50 Mark Is, and had a firm sale for the first production aircraft. [11] Together with companies Sodian [11] and Soprea, [12] Spitfire formed a new venture, Spitfire Helicopters International, to manufacture the Mark I and Mark II in Málaga, Spain. [11] [3] [12]

Nothing came of the joint venture, and Spitfire's attempts to market F-28 derivatives came to an end. [3] In the 1990s, Enstrom marketed its own turbine-powered version of the F-28 as the Enstrom 480.


Specifications

Data from Taylor 1977, p.411

General characteristics

Performance

Notes

  1. 1 2 "Rotor briefs", p.1047
  2. ↑ Taylor 1989, p.839
  3. 1 2 3 4 Simpson 1998, p.234
  4. 1 2 3 4 Taylor 1977, p.411
  5. ↑ Field and Goodman 1976, p.33
  6. 1 2 Lambert 1979, p.1581
  7. 1 2 3 Flight International 7 July 1979., p.12
  8. 1 2 3 Flight International 5 May 1979, p.1444
  9. ↑ Lambert 1977, p.404
  10. ↑ "Enstrom finds new money", p.1464
  11. 1 2 3 4 5 "Spitfire and Sodian about to sign?", p.1208
  12. 1 2 Taylor 1985, p.202

Related Research Articles

Sikorsky S-76 American medium-size commercial utility helicopter

The Sikorsky S-76 is an American medium-size commercial utility helicopter, manufactured by the Sikorsky Aircraft Corporation. The S-76 features twin turboshaft engines, four-bladed main and tail rotors, and retractable landing gear.

Bristol Belvedere

The Bristol Type 192 Belvedere is a British twin-engine, tandem rotor military helicopter built by the Bristol Aeroplane Company. It was designed by Raoul Hafner for a variety of transport roles including troop transport, supply dropping and casualty evacuation. It was operated by the Royal Air Force (RAF) from 1961 to 1969. The Belvedere was Britain's only tandem rotor helicopter to enter production, and one of the few not built by Boeing or Piasecki.

Agusta-Bell AB.102

The Agusta AB.102 was an Italian helicopter produced in small numbers in the early 1960s. The aircraft was based on the mechanical components of a Bell 48 that Agusta incorporated into an all-new, streamlined fuselage. The first flight was on 3 February 1959 and the prototype was exhibited at that year's Paris Air Show in faux military colours. Only two production examples were built, operated by Elivie in a regular air service between Turin and Milan from 1961. However, the advent of turbine-powered helicopters in the 1960s soon rendered the AB.102 obsolete.

Brantly B-2

The Brantly B-2 is an American two-seat light helicopter produced by the Brantly Helicopter Corporation.

Enstrom F-28 Light, piston-powered helicopter family

The Enstrom F-28 and 280 are a family of small, light piston engine powered helicopters produced by the Enstrom Helicopter Corporation.

Bell 214ST

The Bell 214ST is a medium-lift, twin-engine helicopter descended from Bell Helicopter's ubiquitous UH-1 Huey series. Though it shares a type number with the somewhat-related Bell 214, the 214ST is larger and of quite different appearance.

Bölkow Bo 103

The Bölkow Bo 103 was a small experimental helicopter flown in West Germany in 1961 to research new rotor systems. While the mechanics of the aircraft were based on the Bo 102 captive training rig, the Bo 103 was capable of fully independent flight. In configuration, it was absolutely minimalist - consisting of nothing more than a tubular frame to which the dynamic components and the pilots seat were attached, although a small fibreglass cabin was eventually attached. The aircraft retained the Bo 102's single-rotor of Glass-reinforced plastic, and proved that this was suitable for true flight. The prototype is preserved at the Hubschraubermuseum Bückeburg.

Enstrom 480

The Enstrom 480 is a small, light helicopter produced by the Enstrom Helicopter Corporation.

Doman LZ-5 Utility helicopter prototype

The Doman LZ-5 was a utility helicopter developed in the United States in the early 1950s by Doman Helicopters Inc. of Danbury, Connecticut. Despite the procurement of international manufacturing agreements, no series production of the aircraft ever occurred and only three prototypes were built. Two of these were purchased by the United States Army as the YH-31, but eventually becoming VH-31.

Cicaré CK.1

The Cicaré CK.1 was a light helicopter developed in Argentina in the 1970s. It was a small, single-rotor aircraft of pod-and-boom configuration with a fully enclosed bubble canopy that could seat three people side-by-side. Cicaré's previous helicopter designs had attracted the attention of the Argentine Air Force, which in 1974 contracted him to develop a light helicopter for training and also marketed for agricultural use. A prototype, registered LV-X62 flew in September 1976, and the Air Force placed an order for five pre-production machines. However, development was terminated at this point.

Cierva CR Twin

The Cierva CR Twin was a five-seat utility helicopter that first flew in the UK in 1969. It was a joint development between Cierva Autogiro Company and Rotorcraft now a subsidiary of Cierva, based on the dynamic systems of the latter company's Grasshopper design. A new, highly streamlined pod-and-boom fuselage was married to the Grasshopper's coaxial rotor system, and the new aircraft registered G-AWRP first flew on 18 August 1969.

Gyrodyne RON Rotorcycle Experimental US Navy & Marine Corps helicopter

The Gyrodyne RON Rotorcycle was a tiny, single-seat helicopter designed under contract for the United States Navy. in the mid-1950s. It later was redesigned for a U.S. Marine Corps requirement for a small personal helicopter that would fulfill a number of roles, including observation, liaison, small unit tactical maneuvers, and which could be dropped to downed airmen behind enemy lines to facilitate their escape.

HTM Skytrac

The HTM Skytrac was a light utility helicopter developed in Germany in the 1960s and 70s. A later four-seat version was known as the Skyrider. Despite achieving certification from the German aviation authorities and firm orders from customers, the Skytrac was never produced in series.

Sikorsky S-52

The Sikorsky S-52 is a utility helicopter developed by Sikorsky Aircraft in the late 1940s. It was used by the U.S. Navy, Marines, and Coast Guard. The S-52 was the first US helicopter with all-metal rotor blades. A two-seater, it was developed into the four-seat S-52-2. It was designated HO5S-1 by the U.S. Navy and Marine Corps; HO5S-1G by the Coast Guard; and YH-18A by the Army.

The Kamov Ka-126 is a Soviet light utility helicopter with co-axial rotors. Evolved from Ka-26 with engine pods removed from stub wings, fitted with one TVO-100 turboshaft engine positioned on top of fuselage, modified rotor blades, new fuel system.

Kellett XR-8

The Kellett XR-8 was a helicopter built in the United States during World War II. It was a two-seat machine intended to demonstrate the feasibility of a twin-rotor system, and while it accomplished this, it also demonstrated a number of problems that prevented further development of this particular design.

Kellett XR-10

The Kellett XR-10 was a military transport helicopter developed in the United States in the 1940s that only flew in prototype form. It was designed in response to a USAAF Technical Instruction issued for the development of a helicopter to transport passengers, cargo, or wounded personnel within an enclosed fuselage. Kellett's proposal followed the general layout that the company was developing in the XR-8, with twin intermeshing rotors, and was accepted by the Air Force on 16 October over proposals by Sikorsky, Bell, and Platt-LePage.

The Scheutzow Model B or Scheutzow Bee was a two-seat utility helicopter developed in the United States in the late 1960s and early 1970s.

The Spitfire Mark II, later given the name Tigershark, was a utility helicopter built in the United States in the late 1970s and intended for series production. It was a further evolution of the Spitfire Mark I design, a turbine-powered conversion of the Enstrom F-28. Although airframe changes on the Mark I had been minimal, the Mark II had a substantially redesigned fuselage that rearranged the F-28's 2+2 seating to move the pilot's seat forward in the nose by itself and add a bench seat for three passengers abreast behind it. The leftmost seat on the bench could be fitted with dual controls. The fuselage was lengthened, and the powerplant installation was mounted well to the rear. The Mark II still used the dynamic components of the F-28, plus some of its airframe.

The VTOL Aircraft Phillicopter is a 1970s Australian light utility helicopter designed and built by VTOL Aircraft of Newcastle West, New South Wales.

References


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.