Staff (building material)

Last updated
Detail of a cornice moulded in staff, Manufactures and Liberal Arts Building at the Chicago World's Columbian Exposition, 1893 Mfg & liberal arts bldg construction photos 08.jpg
Detail of a cornice moulded in staff, Manufactures and Liberal Arts Building at the Chicago World's Columbian Exposition, 1893

Staff is a kind of artificial stone used for covering and ornamenting temporary buildings.

Facade of the Fisheries Building, World's Columbian Exposition. Three pillared archways are constructed and finished, in front of a bare wall of wooden studding that has not yet been rendered. Fisheries Building Construction Photos Worlds Columbian exposition 07.jpg
Facade of the Fisheries Building, World's Columbian Exposition. Three pillared archways are constructed and finished, in front of a bare wall of wooden studding that has not yet been rendered.

It is chiefly made of plaster of Paris (powdered gypsum), with a little cement, glycerin, and dextrin, mixed with water until it is about as thick as molasses. When staff is cast in molds, it can form any shape. To strengthen it, coarse cloth or bagging, or fibers of hemp or jute, are put into the molds before casting. It becomes hard enough in about a half-hour to be removed and fastened on the building in construction. Staff may easily be bent, sawed, bored, or nailed. Its natural color is murky white, but it may be made to resemble any kind of stone.

Staff was invented in France in about 1876 and was used in the construction and ornamentation of the buildings of the Paris Expositions of 1878 and of 1889. It was also largely used in the construction of the buildings of the World's Columbian Exposition at Chicago in 1893, at the Omaha and Buffalo Expositions in 1898 and 1901, at the Louisiana Purchase Exposition in 1904, and at later expositions, and on temporary buildings of other kinds.

See also


Related Research Articles

<span class="mw-page-title-main">Floor</span> Walking surface of a room

A floor is the bottom surface of a room or vehicle. Floors vary from simple dirt in a cave to many layered surfaces made with modern technology. Floors may be stone, wood, bamboo, metal or any other material that can support the expected load.

<span class="mw-page-title-main">Earth materials</span> Naturally occurring materials found on Earth

Earth materials include minerals, rocks, soil and water. These are the naturally occurring materials found on Earth that constitute the raw materials upon which our global society exists. Earth materials are vital resources that provide the basic components for life, agriculture and industry.

<span class="mw-page-title-main">Plaster</span> Broad range of building and sculpture materials

Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English, "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. The term stucco refers to plasterwork that is worked in some way to produce relief decoration, rather than flat surfaces.

<span class="mw-page-title-main">Building material</span> Material which is used for construction purposes

Building material is material used for construction. Many naturally occurring substances, such as clay, rocks, sand, wood, and even twigs and leaves, have been used to construct buildings and other structures, like bridges. Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacturing of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry, insulation, plumbing, and roofing work. They provide the make-up of habitats and structures including homes.

<span class="mw-page-title-main">Trans-Mississippi Exposition</span> Worlds fair held in Omaha, Nebraska

The Trans-Mississippi and International Exposition was a world's fair held in Omaha, Nebraska, from June 1 to November 1 of 1898. Its goal was to showcase the development of the entire West from the Mississippi River to the Pacific Coast. The Indian Congress was held concurrently. Over 2.6 million people came to Omaha to view the 4,062 exhibits during the five months of the Exposition. President William McKinley and William Jennings Bryan were among the dignitaries who attended at the invitation of Gurdon Wattles, the event's leader. A hundred thousand people assembled on the plaza to hear them speak. The Expo stretched over a 180-acre (0.73 km2) tract in North Omaha and featured a 2,000-foot-long (610 m) lagoon encircled by 21 classical buildings that featured fine and modern products from around the world.

This page describe terms and jargon related to sculpture and sculpting.

<span class="mw-page-title-main">Natural building</span> Sustainable construction practice

Natural building or ecological building is a discipline within the more comprehensive scope of green building, sustainable architecture as well as sustainable and ecological design that promotes the construction of buildings using sustainable processes and locally available natural materials.

<span class="mw-page-title-main">Falsework</span> Temporary structure to support permanent structure during construction

Falsework consists of temporary structures used in construction to support a permanent structure until its construction is sufficiently advanced to support itself. For arches, this is specifically called centering. Falsework includes temporary support structures for formwork used to mold concrete in the construction of buildings, bridges, and elevated roadways.

<span class="mw-page-title-main">Conservation and restoration of immovable cultural property</span> Process of preservation of historically significant buildings

Conservation and restoration of immovable cultural property describes the process through which the material, historical, and design integrity of any immovable cultural property are prolonged through carefully planned interventions. The individual engaged in this pursuit is known as an architectural conservator-restorer. Decisions of when and how to engage in an intervention are critical to the ultimate conservation-restoration of cultural heritage. Ultimately, the decision is value based: a combination of artistic, contextual, and informational values is normally considered. In some cases, a decision to not intervene may be the most appropriate choice.

<span class="mw-page-title-main">Formwork</span> Molds for cast

Formwork is molds into which concrete or similar materials are either precast or cast-in-place. In the context of concrete construction, the falsework supports the shuttering molds. In specialty applications formwork may be permanently incorporated into the final structure, adding insulation or helping reinforce the finished structure.

<span class="mw-page-title-main">Grand Palais</span> Historic site, exhibition hall in Paris, France

The Grand Palais des Champs-Élysées, commonly known as the Grand Palais, is a historic site, exhibition hall and museum complex located in the 8th arrondissement of Paris between the Champs-Élysées and the Seine, France. Construction of the Grand Palais began in 1897 following the demolition of the Palais de l'Industrie to prepare for the Universal Exposition of 1900. That exposition also produced the adjacent Petit Palais and Pont Alexandre III.

<span class="mw-page-title-main">Plasterwork</span> Construction or ornamentation done in plaster or a similar material

Plasterwork is construction or ornamentation done with plaster, such as a layer of plaster on an interior or exterior wall structure, or plaster decorative moldings on ceilings or walls. This is also sometimes called pargeting. The process of creating plasterwork, called plastering or rendering, has been used in building construction for centuries. For the art history of three-dimensional plaster, see stucco.

<span class="mw-page-title-main">Precast concrete</span> Construction material

Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and maneuvered into place; examples include precast beams, and wall panels, floors, roofs, and piles. In contrast, cast-in-place concrete is poured into site-specific forms and cured on site.

<span class="mw-page-title-main">Cast stone</span> Material simulating natural stone

Cast stone or reconstructed stone is a highly refined building material, a form of precast concrete used as masonry intended to simulate natural-cut stone. It is used for architectural features: trim, or ornament; facing buildings or other structures; statuary; and for garden ornaments. Cast stone can be made from white and/or grey cements, manufactured or natural sands, crushed stone or natural gravels, and colored with mineral coloring pigments. Cast stone may replace such common natural building stones as limestone, brownstone, sandstone, bluestone, granite, slate, coral, and travertine.

<span class="mw-page-title-main">Building insulation material</span> Insulation material

Building insulation materials are the building materials that form the thermal envelope of a building or otherwise reduce heat transfer.

<span class="mw-page-title-main">Bench jeweler</span> Artisan who makes and repairs jewelry

A bench jeweler is an artisan who uses a combination of skills to make and repair jewelry. Some of the more common skills that a bench jeweler might employ include antique restoration, silversmithing, goldsmithing, stone setting, engraving, fabrication, wax carving, lost-wax casting, electroplating, forging, & polishing.

<span class="mw-page-title-main">Cellulose insulation</span>

Cellulose insulation is plant fiber used in wall and roof cavities to insulate, draught proof and reduce noise. Building insulation in general is low-thermal-conductivity material used to reduce building heat loss and gain and reduce noise transmission.

Alternative natural materials are natural materials like rock or adobe that are not as commonly used as materials such as wood or iron. Alternative natural materials have many practical uses in areas such as sustainable architecture and engineering. The main purpose of using such materials is to minimize the negative effects that built environments can have on the planet, while increasing the efficiency and adaptability of the structures.

<span class="mw-page-title-main">Conservation and restoration of lighthouses</span> Preservation of building structures

The conservation and restoration of lighthouses is when lighthouse structures are preserved through detailed examination, cleaning, and in-kind replacement of materials. Given the wide variety of materials used to construct lighthouses, a variety of techniques and considerations are required. Lighthouses alert seagoers of rocky shores nearby and provide landmark navigation. They also act as a physical representation to maritime history and advancement. These historic buildings are prone to deterioration due to their location on rocky outcrops of land near the water, as well as severe weather events, and the continued rise of sea levels. Given these conditions preservation and conservation efforts have increased.