Stevens-Duryea

Last updated
  • J. Stevens Arms and Tool Company
  • Stevens-Duryea Company
  • Stevens-Duryea, Inc.
Industry Automotive
PredecessorHampden Automobile and Launch Company
Founded1901;122 years ago (1901)
Founder J. Frank Duryea, Irving H. Page
Defunct1927;96 years ago (1927)
FateClosed
Headquarters,
Key people
  • J. Frank Duryea
  • William M. Remington
  • Irving H. Page
  • Walter H. Whiteside
  • Ray S. Deering
  • Ralph R. Owen
Products Automobiles
Production output
14,078 (1901–1927)

Stevens-Duryea was an American manufacturer of Veteran and Brass Era automobiles in Chicopee Falls, Massachusetts, between 1901 and 1915 and Vintage Cars from 1919 to 1927.

Contents

The company was founded by J. Frank Duryea and J. Stevens Arms and Tool Company, in 1901 to build cars to Frank Duryea's design. First appearing as a two-cylinder runabout, the cars entered the luxury market with four-cylinder engines and pioneered the development of six-cylinder cars. Known for quality and craftsmanship, the company voluntarily closed in 1915 during a weak economic market. The rights and engineering for the Stevens-Duryea were acquired by a new company in 1919 and resumed car production on a limited scale until 1927. [1]

History

Hampden Automobile & Launch Company

1901 Hampden Phaeton described as 1902 Stevens-Duryea in Automobile Topics 1901 Hampden Phaeton described as 1902 Stevens-Duryea in Automobile Topics.jpg
1901 Hampden Phaeton described as 1902 Stevens-Duryea in Automobile Topics

After departing from the Duryea Motor Wagon Company in July 1898, J. Frank Duryea was hired to build a car for the American Automobile Company of New York. When this company appeared to be more interested in stock promotion than building cars, Frank Duryea returned to Springfield (Hampden County) in 1900 and set-up an engineering company with his chief mechanic, John S. Jones and draughtsman William M. Remington. The Hampden Automobile & Launch Company built one launch and three prototype cars. [2] Built in a small shop, the company looked for a partner to begin manufacturing and found J. Stevens Arms and Tool Company with spare manufacturing space and funds. [3]

J. Stevens Arms and Tool Company

1904 Stevens-Duryea Model L Stanhope Runabout 1904Stevens-Duryea.jpg
1904 Stevens-Duryea Model L Stanhope Runabout

A contract to manufacture cars called Stevens-Duryea was signed in August 1901. Stevens Arms had recently purchased the factory of Victor Steam and bicycle maker Overman, and Stevens-Duryea shared the premises for several months. The first Stevens-Duryea was identical to the car developed by Hampden Automobile & Launch and the first 50 cars were planned to be built by March 1902. [4] [3] The Stevens-Duryea was a two-cylinder, 5-hp runabout that sold for $1,200 in 1901 (equivalent to $42,200in 2022). [1]

The firm produced 61 cars in 1902 and 483 in 1903. By 1904 the stanhope runabout, was called the Model L. It had a flat-mounted water-cooled 7-hp engine, situated amidships of the car, four speed gearbox (three forward, one reverse), wire wheels, full-elliptic springs, and tiller steering. Weighing 1,300-lb (590-kg), it sold at $1,300. [1] This would be imported to Britain by Joseph Baker and Sons. [5] Stevens-Duryea would participate in Reliability Trials, hill climbs and some motorsports, [6] and joined A.L.A.M. and participated in the major motor shows. [1] [2]

In 1905 the Model R was introduced, a newly developed 4-cylinder engine of 20-hp,with three-speed gearbox and shaft drive. Briefly advertised as the Twentieth Century Hustler, [7] with an aluminum-bodied, five-seat touring car, priced at $2,500 (equivalent to $81,426in 2022), Stevens-Duryea enter the luxury car market where they would remain. Frank Duryea developed a multi-disc clutch and built his transmission in-unit with the motor. Using 3-point support for the unit engine and transmission, would be advertised for all future models. [1] [2]

Stevens-Duryea Company

1906 Stevens-Duryea Model S Big Six at the Chicago Show 1906 Stevens-Duryea Model S at the Chicago Show - The Automobile.jpg
1906 Stevens-Duryea Model S Big Six at the Chicago Show

The model line grew in 1906, adding a $2,400 runabout and a $3,300 limousine. [1] Stevens-Duryea automobile income was now larger than arms production income and J. Stevens Arms and Tool agreed to set-up a new company. Capitalized at $300,000, 3,000 shares were split 2/3 to J. Stevens Arms and Tool and 1/3 to J. Frank Duryea. Irving H. Page of Stevens Arms became President and Treasurer and Frank Duryea, Vice-President and Engineer. [8] [9]

For 1906 the new Model S Big Six was introduced with a huge 9.6 liter six-cylinder motor, seven-seat tulipwood and aluminum body, weighing 2,900-lbs (1315-kg) and priced at $5,000, equivalent to $162,852in 2022. [10] Introduced at the January 1906 New York Motor Show, it along with Franklin, was one of two six-cylinder American cars shown. National and Frayer-Miller also introduced six-cylinder cars in 1906. [11] [12] Dating their six-cylinder car from 1905 when it was tested, Stevens-Duryea would advertise their cars as the Pioneer Builder of American Sixes. [1]

In 1907, the company dropped the Model L and added the Model U, [13] a six-cylinder (Little Six) of 30/35-hp and priced more competitively at $3,500, equivalent to $109,925in 2022. The Model U became very popular selling into 1910 when it was replaced with the Model AA (Light Six). The Model R was offered until a new four-cylinder, the 1909 Model X and Model XXX runabout was introduced. The model X was rated at 24-hp with prices starting at $2,750. [10]

By 1910, a Model Y 6-40 six-cylinder vehicle replaced the Model S as the largest car. Horsepower ratings changed and the reported horsepower became 54.1. The Model Y formed the basis of Machinery's Reference Guide No. 60 Construction and Manufacture of Automobiles. Remarks in the publication emphasize how the company reached this configuration in the preceding six years. [14] [15]

In 1909 Frank Duryea at the age of 40, on doctor's advice, retired from daily work with Stevens-Duryea due to 20 years over-work and job related stress. [2] Will Remington became chief engineer with Frank Duryea consulting. In July 1911, Walter H. Whiteside, formerly of Allis-Chalmers was elected President and I. H. Page became Chairman of the Board. [16]

In 1913, Stevens-Duryea introduced the Model C-Six on two wheelbases and standardized on a one model policy. The C-Six engine was rated at 44.6-hp and was priced at $4,500 as a touring car, ranging up to $5,950 (equivalent to $176,176in 2022) as a 7 passenger Berline. Production dropped from 1,500 cars in 1912 to 1,000 in 1913, but was more profitable for the company. [2] The company advertising were extolling Nearly a Quarter-Century of Leadership. [1] [2]

The 1915 Model D was the company's last new design, an 80-hp (60 kW) 472ci (7740cc) six-cylinder. [1] In January 1915 it was announced that Stevens-Duryea would stop making cars. Although financially strong, working cash was short and the uncertain financial market were sited as reasons. [17] J. Frank Duryea was now the majority shareholder and turned down financial investments that were conditional on adding a lower priced line of cars. He did not feel Chicopee was a good location for volume production and was not interested in lowering his manufacturing standards. [2] In May 1915 the majority of Stevens Arms and Stevens-Duryea plants was sold to New England Westinghouse Company. [17] One building portion of the plant was retained to supply and make parts for the estimated 14,000 Stevens-Duryeas built. [17]

Stevens-Duryea, Inc.

In July 1919, Ray S. Deering, engineer Thomas L. Cowles and former employees purchased the small factory building, name and goodwill of Stevens-Duryea from Frank Duryea for $100,000. [2] Stevens-Duryea, Incorporated was set-up and construction of a new plant was started. [18] 1920 saw production restarted of the Model D as the Model E with some improvements, post-war inflationary priced at $8,000 for a touring car and up to $9,500 (equivalent to $138,776in 2022) for a limousine. [1] Extensive advertising, hiring of well-known engineers, building a new plant and announcement of plans did not result in many cars being produced. The company entered receivership in 1922 with assets estimated at $2,000,000. Over $4,800,000 of stock had been sold with the Delaware incorporation. The court estimated approximately 152 cars had been sold before receivership. [2]

The company's liabilities were purchased by Ray Owen (of Owen Magnetic) in 1923 and Stevens-Duryea Motors, Inc. was formed. The new factory was sold to satisfy creditors and Stevens-Duryea production moved to the nearby Rauch and Lang factory owned by Owen. [19] A new model Stevens-Duryea was announced, the Model G that was basically the same as the Model E. After only 28 cars were sold in 1924, manufacture of the Model G continued on an as orders received basis until production ended in 1927. [1]

Model overview

YearModelCylinderPower ( hp )Wheelbase (in/cm)Body Styles
1901-19035 HP2569/175Runabout 2-seater and 4-seater
1904-1906Model L2769/175Runabout 2-seater and 4-seater
1905-1909Model R42090/229Touring car 5-seater, Limousine 5-seater
1906-1909Model S

Big Six

650122/310Touring car 7-seater
1907-1909Model U

Little Six

630/35114/290Touring car 5-seater, sedan 5-seater
1909-1912Model X436.1124/315Touring car 5-seater, sedan 7-seater, roadster, fore-door touring car
1909-1910Model XXX424/36.1109/2773-seater runabout, 4-seater baby tonneau
1909-1912Model Y640/54.1142/363Touring Car 7 Seater, Fore-Door Touring Car, Sedan
1910-1912Model AA643/43.8128/3255-seater and 7-seater touring car, 5-seater torpedo, 7-seater limousine, 7-seater landaulet, 4-seater roadster, 2-seater runabout
1913-1914Model C Six644.6/44.8131/333

138/351

Touring car 5-seater, Roadster, Coupelet 2-seater, Convertible Phaeton 5-seater, Demi-Berline 5-seater, Limousine 7-seater, Landau Phaeton 5-seater
1915Model D Six646131/3337-seater sedan, 5-seater touring car, 3-seater roadster, 5-seater Landau Phaeton, Demi-Berline
1915Model DD Six647.2138/3517-seater touring car, 7-seater Landau Phaeton, 7-seater sedan, 7-seater landaulet
1920-1923Model E680138/3514 Seater & 7 Seater Touring Car, 7 Seater Vestibule Sedan, 7 Seater Three-Quarter Sedan, 4 Seater Sedan, Close-Coupled Sport Touring Car, Convertible, Town Brougham, Roadster, Coupe
1924-1927Model G680138/3517-seater touring car, 4-seater sports touring car, 2-seater roadster, 4-seater coupe, 4-seater and 6-seater sedan, 6-seater and 7-seater vestibule sedan, open drive sedan, Town Brougham, convertible

Production

A total of over 14,000 passenger cars were built. [1]

YearNumber
190261
1903483
1904600
1905600
1906739
19071,000
19081,500
19091,500
19101,500
19111,500
19121,500
19131,000
19141,000
1915573
1920204
1921136
192263
192366
192428
192516
19268
19271
total14,078

Advertisements

See also

Related Research Articles

<span class="mw-page-title-main">Acme (automobile)</span> Defunct American motor vehicle manufacturer

The Acme was a make of American automobiles made in Reading, Pennsylvania from 1903 to 1911. They were the successor of the Reber which was made from 1902 to 1903 by Reber Manufacturing.

The Aerocar is an American automobile that was built from 1906 until 1908 in Detroit, Michigan. Backed by Henry Ford's former partner, coal merchant Alexander Malcomson, the short-lived company offered an air-cooled four-cylinder luxury car which sold for $2,800.

<span class="mw-page-title-main">Knox Automobile Company</span> Former American car manufacturer

The Knox Automobile Company was a manufacturer of automobiles in Springfield, Massachusetts, United States, between 1900 and 1914. Knox also built trucks and farm tractors until 1924. They are notable for building the very first modern fire engine in 1905.

Northern Manufacturing Company was a manufacturer of Brass Era automobiles in Detroit, Michigan, automobiles designed by Charles Brady King. Early advertising included catchy phrases such as "Utility is the Basis for Beauty" and "Built for Business" and the famous "Silent Northern".

<span class="mw-page-title-main">Waltham Manufacturing Company</span> Defunct American motor vehicle manufacturer

Waltham Manufacturing Company (WMC) was a manufacturer of bicycles, motorcycles, motorized tricycles and quadricycles, buckboards, and automobiles in Waltham, Massachusetts. It sold products under the brand names Orient, Waltham, and Waltham-Orient. The company was founded in 1893, moving to self-propelled vehicles after 1898.

Smith & Mabley was an American veteran era importer of European automobiles and produced the American C. G. V. automobile in 1902, and the S & M Simplex automobile from 1904 to 1907, in New York City.

<span class="mw-page-title-main">Single Center</span> Former American automobile manufacturer

Single Center Spring Buggy Company was an American carriage and automobile manufacturer based in Evansville, Indiana. The Single Center factory manufactured the Zentmobile, Zent, Windsor, Worth, Single Center, Evansville, Simplicity and Traveler automobiles from 1903 to 1910.

<span class="mw-page-title-main">Standard (1912 automobile)</span> Defunct American motor vehicle manufacturer

The Standard was an American automobile manufactured in Butler, Pennsylvania from 1914 until 1923 by the Standard Steel Car Company.

<span class="mw-page-title-main">Staver</span> Defunct American motor vehicle manufacturer

The Staver and Staver-Chicago was an American Brass Era automobile manufactured at 76th and Wallace Streets in Chicago, Illinois, by the Staver Carriage Company from 1906 until 1914.

Spaulding was used as an automobile marque by two separate companies. The Spaulding Automobile and Motor Company of Buffalo, New York built Veteran Era automobiles in 1902 and 1903. Spaulding Manufacturing Company of Grinnell, Iowa built Brass Era automobiles from 1910 to 1916.

<span class="mw-page-title-main">Moline Automobile Company</span> Defunct American motor vehicle manufacturer

The Moline Automobile Company, was an American brass era automobile manufacturer in East Moline, Illinois known for the Moline, Dreadnought Moline,Moline-Knight and R & V Knight marques.

<span class="mw-page-title-main">Schacht (automobile)</span> Defunct US automobile manufacturer

Schacht was an American marque of automobiles and High-wheelers from 1904 to 1913, in Cincinnati, Ohio. The Schacht Manufacturing Company, later renamed Schacht Motor Car Company produced over 9,000 automobiles. The company was reorganized as the G.A. Schacht Motor Truck Company in 1914 and production of trucks and fire trucks continued until 1938.

<span class="mw-page-title-main">Matheson (automobile)</span> Defunct American motor vehicle manufacturer

The Matheson was a luxury American automobile manufactured from 1903 to 1912, first in Grand Rapids, Michigan, then Holyoke, Massachusetts and from 1906 in a purpose-built factory in Forty Fort, Wilkes-Barre, Pennsylvania.

<span class="mw-page-title-main">Metz Company</span> Early automobile manufacturer

The Metz Company was a pioneer brass era automobile maker established by Charles Herman Metz in Waltham, Massachusetts, from 1909 to 1922.

<span class="mw-page-title-main">Cunningham Car Company</span>

The Cunningham Car Company was a pioneering American production automobile manufacturer. Theirs was one of the earliest vehicles of the automotive age. Cunninghams were produced from 1896 to 1931 in Rochester, New York by James Cunningham, Son and Company who had been in the carriage manufacturing business since 1836.

<span class="mw-page-title-main">Regal (automobile)</span> Defunct American motor vehicle manufacturer

The Regal was an American automobile produced by the Regal Motor Car Company of Detroit, Michigan, from 1907 to 1918.

<span class="mw-page-title-main">Mitchell (automobile)</span> Defunct American motor vehicle manufacturer

Mitchell was a major brass-era automobile marque in Racine, Wisconsin, from 1903 to 1923.

The Pierce Engine Company of Racine, Wisconsin, was the manufacturer of the brass era Pierce-Racine automobile. The company was founded in 1892 and produced automobiles from 1904 to 1910.

<span class="mw-page-title-main">Simplex Automobile Company</span> Defunct American motor vehicle manufacturer

The Simplex Automobile Company was formed in 1907 to take over the manufacturer of the S & M Simplex. The Simplex was an American luxury Brass Era automobile manufactured from 1907 to 1918. Headquartered with a manufacturing plant in New York City, manufacturing from 1912 was in New Brunswick, New Jersey. The Simplex Crane Model 5 was commonly called Simplex-Crane and Crane-Simplex. The Crane-Simplex Company of Long Island, New York, was an attempt in 1922 to revive the brand but closed after only a few chassis were built.

<span class="mw-page-title-main">Mason Motor Car Company</span> Defunct United States motor vehicle manufacturer

The Mason was a Brass Era automobile manufactured in Des Moines, Iowa from 1906 to 1909 and Waterloo, Iowa from 1911 to 1914. In 1909 and 1910 it was marketed as the Maytag-Mason.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Kimes, Beverly Rae; Clark Jr., Henry Austin (1996). Standard Catalog of American Cars 1805-1942 (3rd ed.). Krause Publications. ISBN   978-0-87341-428-9.
  2. 1 2 3 4 5 6 7 8 9 Scharchburg, Richard P. (1993-08-01). Carriages Without Horses: J. Frank Duryea and the Birth of the American Automobile Industry. SAE International. ISBN   978-1-56091-380-1.
  3. 1 2 Automobile Topics. E.E. Schwarzkopf. 1901.
  4. Automobile Review. L.L. Bligh. 1902.
  5. "Joseph Baker and Sons - Graces Guide". www.gracesguide.co.uk. Retrieved 2022-12-07.
  6. The Automobile. Class Journal Company. 1906.
  7. Motor Age. Class Journal Company. 1905.
  8. The Motor Way. L.L. Bligh. 1906.
  9. Railroad Reports. Michie Company. 1912.
  10. 1 2 Wise, p.2189.
  11. The Motor Way. L.L. Bligh. 1906.
  12. Automobile Trade Journal. 1906.
  13. The Stevens-Duryea Automobiles. 1906.
  14. Colvin, Fred Herbert; French, Lester Gray (1909). Machinery. Industrial Press.
  15. Flanders, Ralph E. (1912). Construction and Manufacture of Automobiles (2 ed.). New York: The Industrial Press. Retrieved 1 January 2018.
  16. Newdick, Edwin W.; Naylor, Emmett Hay (1910). Western New England. Springfield Board of Trade.
  17. 1 2 3 The Horseless Age. Horseless Age Company. 1915.
  18. United States Investor. F.P.Bennett. 1919.
  19. The Automobile. Class Journal Company. 1923.

Additional reading