| Stout Batwing Limousine | |
|---|---|
 | |
| Role | Single-engine monoplane |
| National origin | United States |
| Manufacturer | Stout Engineering Company |
| Designer | William Bushnell Stout |
| First flight | 1920 |
The Stout Batwing Limousine was a single-engine, high-wing cantilever aircraft. It was also called simply the "Commercial Sedan".
William Bushnell Stout developed the Stout Batwing, a cantilever blended-wing aircraft with the engine mounted internally. The pioneer aircraft in cantilever wings suffered from poor visibility with its top-mounted open cockpit. The follow-on aircraft, the Stout Batwing Limousine, would have a conventional fuselage and engine arrangement, and a tail mounted further aft. The all-wood cantilever wing did not need struts or braces, reducing parasitic drag on the aircraft. The pilot had side windows and a wing cut-out for forward vision. [1]
Stout acquired financing for the project from Robert Stranahan of the Champion Spark Plug Company. Production started in Detroit, Michigan. [2]
The conventional geared aircraft is all-wood, with veneer wood skins. The propeller was mounted through a forward radiator. The exhaust header stack turned upward, projecting above the top of the fuselage. The fuel tanks are wing mounted. The wing has a chord that spans most of the length of the fuselage. [3]
The first aircraft was flown with an airfoil designed for speed rather than lift. Test pilot Bert Acosta said the aircraft did not have enough lift and visibility. Bert did claim the plane was stable enough to fly with his hands off the controls for several minutes at a time. [4] A second wing with more camber produced favorable results. The aircraft had an alarming "hunting" tendency when gliding that was fixed after 30–40 test flights. Stout mentioned in 1922 that his next example would be built out of metal. [5]
This aircraft was the first in a series by Stout that would later form the Stout Metal Airplane Division of the Ford Motor Company, building the Ford Trimotor.
General characteristics
Performance
The Lockheed Vega is an American five- to seven-seat high-wing monoplane airliner built by the Lockheed Corporation starting in 1927. It became famous for its use by a number of record-breaking pilots who were attracted to the rugged and very long-range design. Amelia Earhart became the first woman to fly solo across the Atlantic Ocean in one, and Wiley Post used his to prove the existence of the jet stream after having flown around the world twice.
The RWD 3 was a 1930 Polish sports aircraft and liaison aircraft prototype, constructed by the RWD team, a single-engine high-wing monoplane.
The Westland Dreadnought was an experimental single-engined fixed-wing monoplane design for a mail plane created to test the aerodynamic wing and fuselage design ideas of Woyevodsky. It was designed and built by British aircraft manufacturer Westland Aircraft for the Air Ministry. Only a single aircraft was built and it crashed on its initial flight, badly injuring the test pilot.
The Stout Skycar was a series of four one-off American light aircraft of the 1930s.
The Ford Flivver is a single-seat aircraft introduced by Henry Ford as the "Model T of the Air". After a fatal crash of a prototype into the ocean off Melbourne, Florida, production plans were halted.
Stout Metal Airplane Division of the Ford Motor Company was an American aircraft manufacturer founded by William Bushnell Stout as the Stout Metal Airplane Co. in 1922. The company was purchased by Ford Motor Company in 1924 and later produced the Ford Trimotor. At the height of the Great Depression, Ford closed the aircraft design and production division in 1936, temporarily re-entering the aviation market with the production of the B-24, at the Willow Run aircraft factory during World War II.
The Stout Batwing was an experimental low aspect ratio flying wing aircraft developed by William Bushnell Stout. The aircraft used wood veneer construction and was an early example of cantilever wing design. The internally braced wing was also one of the first American aircraft designed without drag-producing struts.
The Stout ST was a twin-engine torpedo bomber built for the US Navy. It pioneered the American use of metal construction and the cantilever "thick wing" design concepts of German aeronautical engineer Hugo Junkers, themselves pioneered in the second half of 1915.
The Stout 3-AT trimotor was the first all-metal trimotor built in America. The poorly performing tri-motor led to an updated design which became the popular Ford Tri-Motor.
The Stout 2-AT Pullman, or "Air Pullman", was a single engine all-metal monoplane that was used for early airline travel and air mail transport in America.
The Stout 1-AS Air Sedan was an all-metal monoplane that was an early example in the Ford Trimotor lineage.
The Burnelli RB-1 was a US twin engine biplane airliner prototype from 1920, incorporating a lifting body fuselage.
Raoul J. Hoffman was a Hungary-born hebrew engineer who moved to the United States of America and is notable for the aircraft he designed or helped to design.
The Caproni Ca.124 was a 1930s single-engine Italian reconnaissance and bomber seaplane.
The Kellner-Béchereau EC.4 and Kellner-Béchereau ED.5 were a pair of French training aircraft with side-by-side seating and a novel "double wing" patented by their designer, Louis Béchereau. The principal difference was that the EC.4 had an all-wood structure whereas the ED.5 was all-metal. Both were single-engine, mid-wing cantilever monoplanes.
The Mauboussin M.112, M-12 or Mauboussin M.XII was originally called the Peyret-Mauboussin PM XII and was renamed when Mauboussin founded his own company in 1931, ending his partnership with Louis Peyret. It was a French, single-engine, two-seat, low cantilever wing touring monoplane. At least six were built.
The MIP Smyk, MIP from the initials of its Polish designers with Smyk meaning Brat or Kid, was an aerodynamically refined motor glider designed and built at Warsaw Technical University from 1935.
The Couzinet 30 was a light transport aircraft / mailplane designed and built in France in 1930 at Société des Avions René Couzinet.
The Hamilton H-18 was a 1920s US four/five passenger aircraft. An early all-metal design, it reflected Junkers and Stout design practices. Though it won safety and efficiency awards only one was built.
The Cairns A was a low wing, two tandem seat monoplane with a metal structure and stressed metal skin. It first flew late in 1931 with a 90 hp (67 kW) engine but was later fitted with more powerful engines including a 185 hp (138 kW) radial.
