T.B. | |
---|---|
Overview | |
Manufacturer | Thompson Brothers |
Production | 1919-1924 |
Body and chassis | |
Class | Cyclecar |
Layout | 3 wheeler |
Platform | Patent tubular |
Powertrain | |
Engine | Precision 10 h.p., or J.A.P. 8 h.p. |
Transmission | 2 or 3 speeds forward, plus reverse Leather/metal clutch |
Dimensions | |
Wheelbase | 7 ft 6 in |
Length | 10 ft 6 in |
Width | 5 ft 0 in |
T.B. was a three-wheeled cyclecar manufactured by the aircraft department of Thompson Brothers of Bilston, England, from 1919 until 1924. A prototype four-wheel car never entered production. Approximately 150 cars were produced [1] of which only one example is believed to have survived.
Thompson Brothers was founded in 1810 in Bilston in the Black Country region of South Staffordshire (now the West Midlands), and in 1882 it was purchased by Enoch Stephen Thompson. [2] The company was based at the Bradley Engineering Works, on Great Bridge Road, Bilston. Initially they manufactured steam boilers, but during World War I they diversified into aircraft components. After the war the tax regulations lead to a boom in cyclecar production so the aircraft department produced a three-wheeled, open, two seater, cycle car that followed aircraft engineering practises and workmanship standards, using high grade materials. [1] [3]
The main appeal of cycle-cars was cheapness to buy and run, but in the overpopulated car market of the 1920s the cost of four-wheeled cars fell to that of cycle-cars, the business tailed off, component acquisition was troublesome, and T.B. only sold 150 cars. Although they designed a four-wheeled car it was never produced.
After the demise of the cyclecar business Thompson became a leading manufacturer of commercial vehicles such as fuel tankers and airport fire tenders.
In 1935, an unusual three-wheeled aircraft refueller was successfully introduced for servicing light aeroplanes at civil aerodromes and during World War II many later variants were manufactured for military use. Many continued in use at civil aerodromes and airports in Britain until the 1960s and 1970s with a few still in use (e.g. at North Weald and Leicester East) in the 1990s. At least 20 examples are known to survive worldwide with museums and private owners today.
Eventually the company became part of the Northern Engineering Industries Group. [1]
Advert in The Light Car and Cyclecar, November 8, 1919, introducing T.B. :-
T.B. Cyclecar Abridged specification: Chassis. - Patent tubular.
Springing. - Quarter elliptic at the front: cantilever at the rear.
Transmission. - Precision 10 h.p., or J.A.P. 8 h.p. : Amac carburetter, M.L.magneto. Clutch - leather to metal with clutch drive. Gearbox:2 speeds forward and a reverse. Bevel gears of Ubas steel.
Lubrication. - Best & Lloyd semi-automatic drip feed to engine : grease cups to all shackle pins
Body. - Sheet metal, well upholstered and very roomy.
Mudguards. - Large sized, rear one hinged.
Footboards. - Accommodating spare wheel and toolbox.
Wheels. - Wire type, fitted with discs, 650mm x 65mm, with 700mm x 80mm tyres; interchangeable, quickly detachable.
Steering. - Direct.
Brakes. - Countershaft and back wheel of detaching type.
Controls. - Bowden system for carburetter and ignition; footpedals for clutch and countershaft brake; hand levers for gear change and rear brake.
Starting. - Handle at front.
Capacity. - Three gallons of petrol and 3 quarts of oil.
Equipment. - Spare wheel, hood, screen, lamps and generator, tools, jack and pump.
(Wheelbase. - 4' 0" x 7' 6"; Overall size, 10' 6" x 5' 0")
(Petrol Consumption. - 50 miles per gallon)
(Tax. - As motor cycle and side-car (£4))
Price. - Ready for the road, £200.
Delivery. - Commencing January.
Sole Manufacturers and Patentees :- Thompson Bros. (Bilston), LTD. Aircraft Dept., Bilston.
The first model produced was the 1920 cyclecar equipped with a 10 hp. air-cooled engine mated to a leather clutch and two-speed gearbox. Design and development had taken approximately 12 months and a prototype completed a 2,000 mile test. The shapely "radiator" was a combined three-gallon petrol tank and three-quart oil tank. [1] [5]
By 1921 they used a 10 hp JAP water-cooled engine and a floating plate clutch to drive the three-speed gearbox. [5]
By 1924 the sports model was equipped with a 10 hp water-cooled Anzani engine and an aluminium body. [5]
Primary table source : University of Wolverhampton. History and Heritage, Thompson Brothers [5]
From 1920 to 1922 T.B.s competed regularly in national events, scoring 27 victories, 31 gold medals, 12 silver and 5 bronze. [6]
They competed in:
There is reportedly only one model still surviving, at the Black Country Living Museum at Dudley.
The Morgan Motor Company is a family-owned English motor car manufacturer founded in 1910 by Henry Frederick Stanley Morgan.
Anzani was an engine manufacturer founded by the Italian Alessandro Anzani (1877–1956), which produced proprietary engines for aircraft, cars, boats, and motorcycles in factories in Britain, France and Italy.
Coventry Victor was a British motorcycle and car manufacturer. Originally Morton & Weaver, a proprietary engine manufacturer in Hillfields, Coventry, founded in 1904, the company changed its name to Coventry Victor Motors in 1911. The company closed in 1971.
Sunbeam Motor Car Company Limited was a British motor car manufacturer with its works at Moorfields in Blakenhall, a suburb of Wolverhampton in Staffordshire, now West Midlands. Its Sunbeam name had been registered by John Marston in 1888 for his bicycle manufacturing business. Sunbeam motor car manufacture began in 1901. The motor business was sold to a newly incorporated Sunbeam Motor Car Company Limited in 1905 to separate it from Marston's pedal bicycle business; Sunbeam motorcycles were not made until 1912.
The Austin 7 is an economy car that was produced from 1923 until 1939 in the United Kingdom by Austin. It was nicknamed the "Baby Austin" and was at that time one of the most popular cars produced for the British market and sold well abroad. Its effect on the British market was similar to that of the Model T Ford in the US, replacing most other British economy cars and cyclecars of the early 1920s. It was also licensed and copied by companies all over the world. The first BMW car, the BMW Dixi, was a licensed Austin 7. In France they were made and sold as Rosengarts, and in the United States they were built by the American Austin Car Company. In Japan, Nissan also used the 7 design as the basis for their first cars, although not under licence. This eventually led to a 1952 agreement for Nissan to build and sell Austins in Japan under the Austin name.
Guy Motors was a Wolverhampton-based vehicle manufacturer that produced cars, lorries, buses and trolleybuses. The company was founded by Sydney S. Guy (1885–1971) who was born in Kings Heath, Birmingham. Guy Motors operated out of its Fallings Park factory from 1914 to 1982, playing an important role in the development of the British motor industry.
The Atomette was a British three-wheeled cyclecar manufactured by Allan Thomas in Cleveland Street, Wolverhampton in 1922.
Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.
Grahame-White was an early British aircraft manufacturer, flying school and later manufacturer of cyclecars.
The Elfe was a French automobile, manufactured in Lavallois, Paris, from 1919 until about 1925 by Ateliers Defrance Freres. The company was founded by M. Eugene Mauve, who was also the instigator of the Bol d'Or race for cyclecars and latterly motorcycles, now held at the Le Mans circuit in France. During its brief life, the company entered numerous races, under various names including ELFE, Elfe-Anzani, Elfe-DeFrance and Mauve.
The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912, A Daimler-Knight sleeve-valve engine option was available in 1911 and 1912.
Baughan was a British cyclecar and motorcycle manufacturer in business from 1920 until 1936. Founded in 1920 in Harrow, Middlesex, from 1921 the company moved to Stroud, Gloucestershire. After motorcycle production finished the company continued in general engineering and plastics.
The Carden was a British 4 wheeled cyclecar made from 1914 by Carden Engineering originally based in Farnham, Surrey but moving in 1914 to Teddington, Middlesex and in 1919 to Ascot, Berkshire.
Golden Arrow was a land speed record racer built in Britain to regain the world land speed record from the USA. Henry Segrave drove the car at 231.45 mph (372.46 km/h) in March 1929 on Daytona Beach, exceeding the previous record by 24 mph (39 km/h).
The Sunbeam Matabele was a British 12-cylinder aero engine that was first flown in 1918. The Matabele was the last iteration of one of Sunbeam's most successful aero engines, the Cossack.
The Warne was a British 4-wheeled cyclecar made from 1912 to 1915 by Pearsall Warne Ltd at the Icknield Works in Letchworth, Hertfordshire.
The Little Midland or LM was a British 4-wheeled cyclecar made from 1910 to 1922 by the Little Midland Light Car Co Ltd in various places in Lancashire.
Crescent Motors Ltd manufactured a cyclecar in Walsall and Birmingham between 1911 and 1915.
Alfred James Dixon (1886–1935) was a British racing driver. He was at the forefront of the development of both the motorcycle and motor car industries and knew the leaders of those industries. In his short life he helped establish Britain's love of racing both marques.
Arthur William Horace Wall was an engineer in the field of motorised transport and inventor of the self-powered wheel in England in the early 20th century. He is best known for his creation of the self-powered wheel, the Wall Autowheel, which could be used to power a bicycle, but he was also the man behind Roc motorcycles and a tricar and four-wheel cyclecar. His main company was A.W. Wall Ltd, but he created several other companies to compartmentalise his different activities, such as the Roc Gear Co, who supplied epicyclic gears to a significant number of manufacturers before WW1.