Tamplin | |
---|---|
1921 Tamplin | |
Overview | |
Manufacturer | Tamplin Motors |
Production | 1919-1924 |
Designer | Sir John Carden |
Body and chassis | |
Class | Cyclecar |
Body style | 2-seat open |
Powertrain | |
Engine | 980 cc |
Dimensions | |
Wheelbase | 84 inches (2134 mm) [1] |
Width | 34 inches (860 mm) [1] |
Tamplin Light Car | |
---|---|
Overview | |
Production | 1924-1925 |
Body and chassis | |
Class | Cyclecar |
Body style | 2-seat |
Powertrain | |
Engine | 964 cc |
Dimensions | |
Wheelbase | 84 inches (2134 mm) [1] |
Length | 114 inches (2896 mm) [1] |
Width | 42 inches (1067 mm) [1] |
The Tamplin was an English automobile manufactured by Tamplin Motors from 1919 to 1923 in Kingston Road, Staines, Middlesex [2] and from 1924 to 1925 in Malden Road, Cheam, Surrey. [3]
Edward Alfred Tamplin, [4] a member of the Sussex brewing family but with no direct involvement in the business, ran the Railway Garage in Staines. He was an agent for the Carden cyclecar and in 1919, after contracting to take the entire output, purchased the rights to manufacture it. The car was powered by a 980 cubic centimetres (60 cu in) JAP V-twin, air-cooled engine mounted on the side of the body and coupled by chain drive to a Sturmey-Archer three-speed-and-reverse gearbox and then by an exposed belt to the rear wheels. To avoid the need for a differential, drive was to the left-side rear wheel. The engine was started by a kick starter from the driver's seat. The clutch pedal, when fully depressed, operated the brakes. The wheels were close together, giving the car a very narrow track. The independent front suspension used coil springs and the rear had quarter elliptical leaf springs. Some cars were fitted with Blackburne engines.
The open body was made of fibreboard which was made waterproof by soaking it in linseed oil. The car seated two people, one behind the other. The body tub also acted as the chassis.
In 1924 a new, more conventional, version was announced with a front-mounted engine and a much wider body, allowing side-by-side seating. A centrally mounted chain replaced the belt drive to the rear axle. The new model also had a separate chassis.
Total production of the cars is uncertain. Tamplin claimed 1896 were made, [2] but this is not supported by known chassis numbers. [5] At the busiest times up to 14 cars a week may have been made.
By 1925 the market for cyclecars was effectively over and Tamplin returned to the garage business becoming a truck dealer. [2]
The Adamson was an English car manufactured in Enfield, Middlesex, from 1912 to 1925. It was designed by Reginald Barton Adamson at the premises of the family haulage contract business.
Bédélia was the archetype of the French cyclecars.
Lloyd Cars Ltd was a British motor manufacturer, founded by Roland Lloyd (1904–65), son of a garage owner, and based in Patrick Street, Grimsby, Lincolnshire, England between 1936 and 1951. Two models were made, separated by World War II; the company was unusual for a small manufacturer in making nearly all components in-house. After car production ceased the company continued in general engineering until 1983. During World War II the company made components for Rolls-Royce Merlin aircraft engines.
The AV was a British cyclecar manufactured by Ward and Avey in Somerset Road, Teddington Middlesex between 1919 and 1924.
Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.
For the cargo bicycle producer see: Xtracycle
The Bow-V-Car was an English cyclecar manufactured from 1922 to 1923 by the Plycar Company of Church Road, Upper Norwood, London. The car was designed by Charles Frederick Beauvais who was later better known as a stylist working for coachbuilders New Avon Body Company.
The GN was a British cyclecar made in London, between 1910 and 1925, The name derived from its founders, H.R. Godfrey and Archibald Frazer-Nash. Production ceased in 1923 but the company kept trading until 1925.
The Janoir was a French motorcycle manufactured from 1919 until 1922 in Saint-Ouen. The few that were made were 965 cc flat twins.
The Elfe was a French automobile, manufactured in Lavallois, Paris, from 1919 until about 1925 by Ateliers Defrance Freres. The company was founded by M. Eugene Mauve, who was also the instigator of the Bol d'Or race for cyclecars and latterly motorcycles, now held at the Le Mans circuit in France. During its brief life, the company entered numerous races, under various names including ELFE, Elfe-Anzani, Elfe-DeFrance and Mauve.
The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912, A Daimler-Knight sleeve-valve engine option was available in 1911 and 1912.
The Lambert automobile and Lambert truck were built by the Lambert Automobile Company as an American vehicle from 1905 through 1916. The Lambert automobile motor in the early part of manufacturing moved around on the chassis. It was on the back of the chassis, then in the center, then to the front, and back again to the rear of the automobile. The early motors were built at the Lambert factories of the Buckeye Manufacturing Company and later they were outsourced to other proprietary manufactures.
The Blériot-Whippet was a British 4 wheeled cyclecar made from 1920 to 1927 by the Air Navigation and Engineering Company based in Addlestone, Surrey.
The Carden was a British 4 wheeled cyclecar made from 1914 by Carden Engineering originally based in Farnham, Surrey but moving in 1914 to Teddington, Middlesex and in 1919 to Ascot, Berkshire.
The Hampton was a British car made by the Hampton Engineering Company which was based in Kings Norton, Birmingham from 1912 to 1918 and at Dudbridge in Stroud, Gloucestershire from 1918 to 1933
The Gibbons was a British 4 wheeled cyclecar made from 1917 to 1929 by engineering pattern makers Gibbons and Moore of Chadwell Heath, Essex. The first car was made in 1914 but production did not start until 1917. By 1920 the car was described as the MkIII.
The Castle Three was a British three-wheeled cyclecar made from 1919 to 1922 by the Castle Motor Company of Castle Mill Works, New Road, Kidderminster, Worcestershire.
The Warren-Lambert Engineering Co. Ltd. was a British automobile manufacturer that was established from 1912 to 1922 in Richmond, then in Surrey. A. Warren Lambert, was an agent for Morgan cars in Putney which he also raced. In 1912 he designed and started to manufacture a two-seat four-wheel cyclecar from premises in Uxbridge Road, Shepherd's Bush. It was well received and around 25 cars a week were being made.
Sima Violet was a French manufacturer of cyclecars between 1924 and 1929.
The Day-Leeds was a British automobile manufactured by Job Day & Sons of Leeds, Yorkshire.