Taurus Judge

Last updated
Taurus Judge
RagingJudgeMagnum.jpg
Taurus "Raging Judge Magnum" revolver with 6.5 inch barrel, chambered in .454 Casull, .45 Colt, and .410 bore shotshell. All Judge revolvers can also fire the short .45 Schofield (.45 S&W).
Type Revolver
Place of originBrazil
Production history
Manufacturer Taurus International
Produced2006–present
Variants4410, 4510, 513
Specifications
Mass29 oz (820 g)
Length7.5 in (190 mm)
Barrel  length3 in (76 mm)
Width1.531 in (38.9 mm)
Height5.394 in (137.0 mm)

Caliber .410 bore
.454 Casull (Raging Judge only)
.45 Colt
.45 Schofield
Action Double-action revolver
Feed system5, 6, or 7 round cylinder
SightsFixed

The Taurus Judge is a five-shot revolver designed and produced by Taurus International, chambered for .410 bore shot shells and the .45 Colt cartridge. Taurus promotes the Judge as a self-defense tool against carjacking and for home protection.

Contents

History

Taurus Judge 'Magnum' edition, shown to scale with a US quarter Taurus Judge Magnum.JPG
Taurus Judge 'Magnum' edition, shown to scale with a US quarter

There have been two model number designations for this firearm, the 4410 (no longer produced) and the 4510 (current). Both model numbers are essentially the same revolver, and any 4410 or 4510 will yield basically the same performance. It got its name "The Judge" in 2006 when Bob Morrison, Executive Vice President, learned that judges in high-crime areas of Miami, Florida, were purchasing the revolver for personal defense in their courtrooms, and after Morrison investigated further, the model designation was changed from 4410 to 4510 to more accurately reflect the revolver's versatility (.45 Colt + 410 shot → "4510"). [1] Taurus International reports that the Judge is their top-selling firearm. [1]

The rifling is shallower than normal, giving single-projectile loads less stabilization than they would receive in other handguns while reducing the rapid dispersion of the shot from shotshells. [2] Taurus developed the shallow rifling after numerous experiments to find rifling that worked well with both types of ammunition. [3]

Though Taurus deliberately designed the Judge to fire shotshells, the Judge does not qualify as a "short-barreled shotgun" under the National Firearms Act of 1934 as its rifled barrel makes it a regular handgun. [2] However, the Judge is considered a short-barreled shotgun under California state law, which has a broader definition of "short-barreled shotgun," and the Judge is thus illegal to possess in that state. [4]

Models

Taurus Public Defender revolver, detailing the shortened hammer and snub-nose barrel Taurus Public Defender.jpg
Taurus Public Defender revolver, detailing the shortened hammer and snub-nose barrel

The Judge, a derivative of the Taurus Tracker, comes in three barrel lengths (3", 4" and 6.5" - Tracker), two cylinder lengths (2.5" and 3"), and two finishes (blued and stainless steel). The 3" barrel model also comes in two weight classes, the standard steel construction (29 oz. currently, 36 oz. previously) and alloy-based "Ultra-Lite" (22 oz currently, 24 oz previously). Felt recoil can be significant with the Ultra-Lite series, due to its light weight, especially with .45 Colt rounds. As of December 2008, spur-less hammers remain available with all short-barrel lengths of The Judge. [5]

At the Shooting, Hunting, Outdoor Trade Show in January 2009, Taurus introduced several new models of the Judge. These have been labeled the Public Defender series and are based on the Taurus Model 85 frame. As with the original Judge, these shoot five rounds of either .45 Colt or .410 shot. Taurus is positioning the Public Defender series as a concealed carry piece. Taurus also introduced the tactical R Ported. The Taurus 4510TKR-3SSR (stainless steel) and 4510TKR-3BR (blued) offer a 3″ ported barrel with a Picatinny rail. [6]

In 2010 Taurus introduced the Raging Judge which is chambered for .454 Casull as well .45 Colt and 3" .410 shot shells. [6]

In 2011 at SHOT Show in Las Vegas, Nevada, Taurus introduced the Raging Judge XXVIII chambered for 28 gauge shotshells. The 67-ounce revolver held five shells in the cylinder and had a 6.5" barrel. The cylinder used a double lock-up similar to the Raging Judge chambered in .454 Casull.

However, rumors began to quickly circulate during the show that the US' Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) seized the prototype guns due to an initial finding that the guns were actually short-barreled shotguns, and therefore illegal. [7] However, American Rifleman reported that Taurus invited the ATF to a meeting to discuss the revolver, and no ATF determination was made at that time. [8]

On March 27, 2011, Taurus International President and CEO Bob Morrison stated on the Gun Talk radio show that the Taurus Raging Judge XXVIII was still under development. [9] Ultimately, the firearm never made it into production and no official statement was made by Taurus about it again.

Carbine

Circuit Judge carbine Taurus-Rossi Circuit Judge.jpg
Circuit Judge carbine

Taurus makes an 18.5in barrelled [10] carbine variant of the Taurus Judge revolver along with its partner company, Rossi. The carbine is known as the Taurus/Rossi Circuit Judge, or the Jury. [11]

It comes in the original combination chambering of .410 bore and .45 Colt. The Taurus/Rossi Circuit Judge has small blast shields attached to the cylinder to protect the shooter from hot gases escaping between the cylinder and barrel. [11]

The carbine has a buttstock and forend made of either Brazilian hardwood or plastic and uses a fiber optic front sight. [12] An optional Picatinny scope mount base allows the user to mount a sight on the top of the frame and a choke is included for turkey hunting. [13]

Efficacy

Shotshells for use in handguns have long been made by loading handgun cartridges with shot rather than single bullets; they are commonly called "snake shot" or "rat shot", indicating their main use for pest control. However, shot is usually intended to be fired through a smooth bore, and the spin imparted by a handgun's rifling scatters it quite widely, limiting its effectiveness to very short ranges. [14] To meet this market, Taurus designed the .45 Colt/.410 Judge to use both bulleted cartridges and .410 shotshells. The shallower rifling of the Judge's barrel is designed to stabilize bullets but not unduly scatter shot.

Taurus also paid attention to effectiveness with buckshot. One example would be 2-1/2" 4 pellet 000 buckshot, such as those offered by Federal and Remington, among others. In the original Judge chambering for standard 212" .410 shells, each shell contains three 000 buckshot, [15] compared to nine 00 (.33") or eight 000 (.36") buckshot in the standard 12 gauge shell commonly used for personal defense or big game hunting. In 2008 Taurus introduced the Judge Magnum which can fire either standard 212" or 3" .410 shotshells which contain five 000 buckshot and are more effective as personal defense rounds. [3] Several ammunition companies offer .410 ammo specifically designed for the Judge with propellant optimized for shorter barrels. The Federal 212" 000 buckshot shell contains 4 pellets. [3] The Remington Home Defense 2.5" / 64mm 000 buckshot shell also contains 4 pellets. A cylinder full (6 shells) of 3" .410 shot shells is the approximate equivalent of three blasts (30; 000 buck pellets) from a 12 gauge shotgun loaded with 000 buck (9; 000 buck pellets each for a total of 27 pellets).

The Taurus Judge is based on the Taurus .45 Colt revolver and is adequate for its designed rounds. It was not designed for higher pressures generated by cartridges such as .44 Magnum or .454 Casull; to prevent the use of such rounds, the firing chambers of the Judge cylinder are choked to prevent chambering rounds larger in diameter than .410 shotshells and longer than .45 Colt cartridges. [2] Later, Taurus introduced the Raging Judge Magnum based on their Raging Bull model designed for magnum cartridges; the Raging Judge Magnum safely chambers .454 Casull as well as .45 Colt cartridges. [16]

See also

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Shotgun</span> Firearm loaded with a cartridge of pellets

A shotgun is a long-barreled firearm designed to shoot a straight-walled cartridge known as a shotshell, which discharges numerous small spherical projectiles called shot, or a single solid projectile called a slug. Shotguns are most commonly used as smoothbore firearms, meaning that their gun barrels have no rifling on the inner wall, but rifled barrels for shooting sabot slugs are also available.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">.454 Casull</span> High power firearm cartridge

The .454 Casull is a firearm cartridge, developed as a wildcat cartridge in 1958 by Dick Casull, Duane Marsh and Jack Fullmer. It was announced in November 1959 by Guns & Ammo magazine. The design is a lengthened and structurally improved .45 Colt case. The wildcat cartridge went mainstream when Freedom Arms brought a single action five-shot revolver chambered in .454 Casull to the retail firearms market in 1983. Ruger followed in 1997, chambering its Super Redhawk in this caliber. Taurus followed with the Raging Bull model in 1998 and the Taurus Raging Judge Magnum in 2010. The .45 Schofield and .45 Colt cartridges can fit into the .454's chambers, but not the other way around because of the lengthened case.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), often called the .45 Long Colt, is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892. Although there has never been a ".45 Short Colt" cartridge, the .45 Colt is frequently called the ".45 Long Colt" to better distinguish it from the shorter .45 Schofield cartridge, which was also in use around the time the .45 Colt was introduced.

<span class="mw-page-title-main">Shotgun cartridge</span> Self-contained cartridge loaded with either shot or a solid slug

A shotgun cartridge, shotshell, or shell is a type of rimmed, cylindrical (straight-walled) ammunition used specifically in shotguns. It is typically loaded with numerous small, spherical sub-projectiles called shot. Shotguns typically use a smoothbore barrel with a tapered constriction at the muzzle to regulate the extent of scattering.

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

<span class="mw-page-title-main">Taurus Raging Bull</span> Revolver

The Raging Bull is a DA/SA, large-frame revolver manufactured by the Brazilian Taurus International firearm company beginning in 1997. The Raging Bull has a dual-locking design built on a heavy frame, allowing the revolver to easily fire extremely powerful loads. Because of the powerful nature of these handguns, the Raging Bull has a ported barrel and a cushioned rubber grip to mitigate harsh recoil. As of 2024, it is the most powerful revolver line ever offered by Taurus.

<span class="mw-page-title-main">Taurus Armas</span> Brazilian manufacturing company

Taurus Armas S.A. is a Brazilian manufacturing conglomerate based in São Leopoldo, Rio Grande do Sul, Brazil. Founded in 1939 as a tool and die forging plant, the company now consists of Taurus Armas, its firearm division, as well as other divisions focusing on metals manufacturing, plastics, body armor, helmets and civil construction.

A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.

<span class="mw-page-title-main">Thompson/Center Contender</span> Break-action

The Thompson/Center Contender is a break-action single-shot pistol or rifle that was introduced in 1967 by Thompson/Center Arms. It can be chambered in cartridges from .17 Bumble Bee to .45-70 Government.

<span class="mw-page-title-main">Magnum Research BFR</span> Revolver

The Magnum Research BFR is a single-action revolver manufactured by Magnum Research. Modeled after the Ruger Blackhawk, it is constructed of stainless steel and chambered for a number of powerful handgun cartridges, such as .460 S&W Magnum and .500 S&W Magnum; popular rifle chamberings, including .30–30 WCF, .444 Marlin, and .45-70 Government; and even .410 bore shotshells. Notably, the BFR platform has also served as the basis for custom caliber conversions to 19th century big game cartridges such as the .50–110 WCF and .50-90 Sharps, as well as the .500 Bushwhacker, which is currently considered to be the most powerful handgun cartridge in the world in terms of muzzle energy. The name "BFR" originally stood for "Brainerd’s First Revolver", in reference to Brainerd, Minnesota, where the early BFRs were manufactured. Officially the acronym now stands for "Biggest, Finest Revolver", though it was rebranded for a time as the "Big Frame Revolver" after Magnum Research's 2010 acquisition by Kahr Arms.

<span class="mw-page-title-main">North American Arms</span> American arms company

North American Arms is a United States company, headquartered in Provo, Utah, that manufactures pocket pistols and mini-revolvers, also called mouse guns. The company was originally named Rocky Mountain Arms when it was founded in 1972. In 1974 it was bought by new owners who renamed the company North American Manufacturing (NAM) and then North American Arms (NAA).

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Cylinder (firearms)</span> Cylindrical part of the revolver that holds the ammunition

In firearms, the cylinder is the cylindrical, rotating part of a revolver containing multiple chambers, each of which is capable of holding a single cartridge. The cylinder rotates (revolves) around a central axis in the revolver's action to sequentially align each individual chamber with the barrel bore for repeated firing. Each time the gun is cocked, the cylinder indexes by one chamber. Serving the same function as a rotary magazine, the cylinder stores ammunitions within the revolver and allows it to fire multiple times, before needing to be reloaded.

<span class="mw-page-title-main">Bond Arms</span> Texas gun manufacturer

Bond Arms Inc. is an American firearms manufacturer located in Granbury, Texas which makes derringers, the semi-automatic Bullpup9 pistol, and announced plans to put a tactical lever-action rifle into production by the end of 2023.

<span class="mw-page-title-main">Smith & Wesson Model 460</span> Revolver

Smith & Wesson Model 460 is a large bore five-shot, single-action/double-action revolver by Smith & Wesson chambered for the .460 S&W Magnum cartridge. It was designed as a hunting and dangerous game defensive revolver for use in Africa and Alaska. The revolver is built on the company's largest and strongest frame, known as the X-Frame, and represents a joint effort among Smith & Wesson, Hornady, and Cor-Bon.

<span class="mw-page-title-main">Freedom Arms</span> Freedom, Wyoming based firearm manufacturing company

Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.

<span class="mw-page-title-main">Smith & Wesson Governor</span> Revolver

The Smith & Wesson Governor is a snub-nosed single-action/double-action revolver built on the Z-frame and utilizes a K-frame grip with a lightweight scandium alloy or stainless steel frame.

<span class="mw-page-title-main">Dick Casull</span>

Richard J. Casull was a Salt Lake City-born gunsmith and wildcat cartridge developer whose experiments with .45 Colt ammunition in the 1950s led to the creation of the .454 Casull cartridge. Casull's passion was six-shooters, and he was determined to create a high velocity round for the .45 Colt. His goal was to achieve a muzzle velocity of 2,000 feet per second with Colt .45 rounds fired from a single-action Army-style revolver with a 7+12inch barrel. This proved impossible due to the tensile strength of the Colt .45 cylinder, so he set out to develop his own casing and bullet.

References

  1. 1 2 "Taurus Big-Bore Double Feature". Shooting Times. Archived from the original on 2009-02-12.
  2. 1 2 3 "The Judge Rules". American Rifleman. January 2009.
  3. 1 2 3 Radielovic, Marko; Prasac, Max (31 August 2012). Big-Bore Revolvers. Iola,Wisconsin: Gun Digest Books. p. 55. ISBN   978-1-4402-2856-8.
  4. Michel, C.D. (June 13, 2011). "Judging the Judges: Illegal Firearms in California?" (PDF). Los Angeles: Michel & Associates. pp. 1–11.
  5. Shideler, Dan (2010). Guns Illustrated 2011: The Latest Guns, Specs & Prices. Iola, Wisconsin: F+W Media, Inc. p. 192. ISBN   978-1-4402-1624-4.
  6. 1 2 Lee, Jerry (2013). Gun Digest 2014. Iola, Wisconsin: Krause Publications. p. 441. ISBN   978-1-4402-3542-9.
  7. Big gun, Short lived. Taurus 28 Gauge Revolver
  8. The Judge Goes Even Bigger Bore
  9. March 27, 2011 Gun Talk radio program
  10. "Rossiusa.com".
  11. 1 2 Muramatsu, Kevin (2013). The Gun Digest Book of Centerfire Rifles Assembly/Disassembly. Iola, Wisconsin: Krause Publications. p. 310. ISBN   978-1-4402-3544-3.
  12. Cassell, Jay (2013). Shooter's Bible: The World's Bestselling Firearms Reference. Skyhorse Publishing Company, Incorporated. p. 260. ISBN   978-1-62087-516-2.
  13. Lee, Jerry (11 April 2012). The Official Gun Digest Book of Guns & Prices 2012. Iola, Wisconsin: Gun Digest Books. p. 878. ISBN   978-1-4402-2927-5.
  14. Maj. George C. Nonte, Jr., Handloading for Handgunners, Follet Publishing, 1978, Chapter 14 Shot and Multi-Ball Loads, p.184ff. ISBN   0-695-81199-1.
  15. "The .410 Bore". ChuckHawks.com.
  16. Pearsall, Jennifer (2012). Gun Digest Illustrated Guide to Modern Firearms. Iola, wisconsin: Gun Digest Books. p. 117. ISBN   978-1-4402-3253-4.