Theiss Sportster

Last updated

Sportster
Role Homebuilt aircraft
National origin United States
Manufacturer Theiss Aviation
Introduction1998
StatusProduction completed

The Theiss Sportster is an American homebuilt aircraft that was designed and produced by Theiss Aviation of Salem, Ohio, introduced in 1998. When it was available the aircraft was supplied as a kit for amateur construction. [1]

Contents

Design and development

The aircraft features a biplane layout, a single-seat, open cockpit, fixed conventional landing gear and a single engine in tractor configuration. The Sportster was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 252 lb (114 kg). It was intended to resemble biplane of the 1930s and mounts its upper wing not on cabane struts, but on a central pylon that has a tunnel to allow the pilot forward vision. [1]

The aircraft is made with mixed construction, from aluminum, steel, wood and foam. Its 17.5 ft (5.3 m) span wings have a total wing area of 82 sq ft (7.6 m2). The cockpit width is 20 in (51 cm). [1]

The aircraft has a typical empty weight of 252 lb (114 kg) and a gross weight of 460 lb (210 kg), giving a useful load of 208 lb (94 kg). With full fuel of 5 U.S. gallons (19 L; 4.2 imp gal) the payload for the pilot and baggage is 178 lb (81 kg). [1]

The manufacturer estimated the construction time from the supplied kit as 400 hours. [1]

The company later turned its attention to produce unmanned aerial vehicles for the US Navy and no longer produces manned aircraft. [2]

Operational history

By 1998 the company reported that two Sportsters had been completed and were flying. Customer kits were forecast to start shipping in March 1998. [1]

Specifications (Sportster)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

Culp Special American homebuilt aircraft

The Culp Special is an American aerobatic homebuilt aircraft designed and produced by Culp's Specialties of Shreveport, Louisiana. The aircraft is supplied as a kit or in the form of plans for amateur construction.

The Early Bird Spad 13 is an American homebuilt aircraft that was designed and produced by the Early Bird Aircraft Company of Erie, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Historical P-51 Mustang is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original North American P-51 Mustang and when it was available was supplied as a kit for amateur construction.

The Historical F4U Corsair is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 60% scale replica of the original Chance-Vought F4U Corsair and when it was available was supplied as a kit for amateur construction.

The Historical P-40C Tomahawk is an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 62.5% scale replica of the original Curtiss P-40C Tomahawk and when it was available was supplied as a kit for amateur construction.

The Kelly-D is an American homebuilt aircraft that was designed by Dudley R. Kelly of Versailles, Kentucky, in 1981. When it was available the aircraft was supplied in the form of plans for amateur construction. Aircraft Spruce & Specialty Co still provides some spruce wing parts for the design.

Hatz Classic American homebuilt biplane

The Hatz Classic is an American homebuilt biplane, designed by Billy Dawson and produced by the Makelan Corporation of New Braunfels, Texas. The aircraft is supplied as a kit or, alternatively, in the form of plans for amateur construction.

The Deland Travel Air 2000 is an American homebuilt aircraft that was designed and produced by Orlando Helicopter Airways, an aircraft maintenance and repair company located in DeLand, Florida. When it was available the aircraft was supplied as a kit for amateur construction and marketed under the "Deland" brand, named for the company's location. Plans were also available.

The St Croix Pietenpol Aerial is an American homebuilt aircraft that was designed by Chad and Charles Willie and produced by St Croix Aircraft of Corning, Iowa, first flown in 1977. When it was available the aircraft was supplied in the form of plans for amateur construction, with partial kits available.

The St Croix Pietenopol Aircamper is an American homebuilt aircraft, an adaptation of the classic 1920s Pietenpol Air Camper, re-designed by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a partial kit and in the form of plans for amateur construction.

SkyDancer SD-260 American homebuilt aircraft

The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.

The Theiss Speedster is an American Homebuilt ultralight biplane that was designed and produced by Theiss Aviation of Salem, Ohio. When it was available the aircraft was supplied as a quick-build kit for amateur construction.

The V-STOL XC 2000T is an American homebuilt and ultralight trainer aircraft that was designed and produced by V-STOL Aircraft of Fort Myers, Florida, introduced in the fall of 1997. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL Super Solution 2000 is an American STOL homebuilt aircraft that was designed by Dick Turner and produced by V-STOL Aircraft Corporation of Fort Myers, Florida. When it was available the aircraft was supplied as a kit for amateur construction.

The V-STOL Pairadigm is an American twin-engine center-line thrust STOL homebuilt aircraft that was designed and produced by V-STOL Aircraft Corporation of Fort Myers, Florida, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The Vancil Spitz S1 is an American homebuilt aircraft that was designed and produced by A. Vancil of Belton, South Carolina, introduced in the late 1990s. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 360. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. Theiss Aviation. "Company History". Archived from the original on June 19, 2015. Retrieved May 3, 2015.