Trainmaster Command Control

Last updated August 21, 2022

Trainmaster Command (TMCC) is Lionel's electronic control system for O scale 3-rail model trains and toy trains that mainly ran from 1994 to 2006. Conceptually it is similar to Digital Command Control (DCC), the industry's open standard used by HO scale and other 2-rail DC trains. It has one advantage over DCC, in that TMCC-equipped locomotives can run simultaneously with non-TMCC locomotives and Lionel Legacy engines as well as LionChief and LionChief Plus equipped locomotives.^[1] The latter require a dedicated remote controller. MTH Corporation's DCS controller can be configured to control TMCC locomotives, and all four systems (TMCC, Legacy, LionChief/LionChief+ and DCS) can be operated on the same track simultaneously. Each simply requires a constant track voltage (18 volts). TMCC/Legacy "broadcasts" its signal to the antenna on the locomotives which listen for signals that first identify the particular locomotive by number and then it issues given commands as to speed, direction, sounds, lighting and other features. DCS performs similar functions but transmits a carrier over the rails which are picked up through the locomotive's electrical pickup contacts. While TMCC/Legacy and DCS remote controls relay operator commands to a device that transmits them to the train (Command Base or Track Interface Unit), LionChief/LionChief+ also issue remote control commands but the remote and locomotive are married and each locomotive requires a separate remote control. This system requires no additional wiring as the control is directly "narrowcast" to the locomotive in the same way as a television remote control or garage door opener functions. In 2017, Lionel released a universal remote for LionChief+ that will learn addresses for up to three locos at a time, simplifying the operation of multiple trains.

TMCC permits operation of multiple trains on the same track without complex wiring, and also gives locomotives realistic digitized sounds.

Its development was backed financially by rock and roller Neil Young as part of a partnership between Young and one-time Lionel owner Richard Kughn known as Liontech. Liontech, roughly headquartered on Young's northern California ranch, consisted of a loose confederation of technology developers whom Young had assembled to help develop individual components of the TrainMaster Command system.

Chief among these contributors was Applied Design Laboratories of Grass Valley, California, headed by Atari 2600 co-patent holder Ron Milner. Young had been referred to Milner by his neighbor and friend, Nolan Bushnell, co-founder of Atari. Milner's team (consisting of numerous members, including Robert Johnson and Bryan Scott) developed the main elements of the Command system, including the innovation of using the Lionel steel tubular track system as a broadcast antenna for digital signals overlaying the electrical power being delivered through the track to locomotives, rolling stock and connected accessories. In larger layout practical application, the use of the track as an antenna has fallen somewhat short of success, however and a separate antenna wire stapled along the right-of-way has proven to solve the problem.

Also included in the TrainMaster Command system is RailSounds, which provides digital sound effects to complement the digital control features of the system. RailSounds was developed by a separate team of technologists in the Bay Area. An early, distinguishing feature of RailSounds was the fact that each individual locomotive system (e.g. a "Hudson" 4-6-4 steam locomotive) was based on a real-life counterpart, not a generic "steam" sound. The Lionel RailSounds Hudson sound system was captured by the Liontech team on location in West Vancouver, British Columbia, Canada, using the former Canadian Pacific "Royal Hudson" as the sound model.

During the 90's Lionel Boom Years, TMCC became one of the most popular O Scale remote systems to use. Introduced in 1994, from the years 1996 to 2002, it had its biggest boom but sales for the TMCC declined since technology had soon caught up with the TMCC system but is still available and many Legacy engines and MTH DCS engines do allow the operation of the older TMCC remote system. By 2006, TMCC was replaced by the Cab-2 and the LEGACY system. TMCC today is used in Lionel products mainly in motorized units, switches, and some accessories.

Lionel has since licensed TMCC to some of its competitors, including K-Line, and aftermarket circuit boards are available to add TMCC to O scale and S scale trains that lack the capability.

Neil Young's involvement in Liontech was the direct reason for his becoming aware of Kughn's putting Lionel Trains, Inc. up for sale in early 1995. Young saw an opportunity to become at least part owner in the company he revered, and working with Liontech team member Jim Bunte, assembled a marketing plan to attract investors to help underwrite the purchase price. After several meetings with potential lead equity partners, a deal was struck with Martin Davis, former chairman of Paramount / Gulf+Western, who had recently divested his ownership in that company to Sumner Redstone of Viacom. With his proceeds, Davis founded Wellspring Associates, a New York-based investment firm. The acquisition of Lionel Trains, Inc. and its September 1995 transformation into Lionel LLC was Wellspring's first investment.

The competitor MTH uses a similar system, called DCS.

TMCCII Legacy

In their 2006 Volume 2 catalog, Lionel officially unveiled the new TMCCII "Legacy" system. TMCCII promises to revolutionize the way people control and play with their model trains, by adding more features that mimic prototypical operations of a real railroad, and subsequently, a real locomotive. TMCCII is backwards-compatible with existing TMCC modules, and can work simultaneously with CAB-1 controller.

Like TMCCI, the core of the "Legacy" system is the handheld remote. The CAB-2 remote features, among other new functions, a back-lit LCD screen, back-lit LCD touchscreen keypad (which can toggle between numbers and control icons), a Feedback mode (the controller rumbles reflecting the struggling engine), and rechargeable batteries.

The first locomotive to feature TMCCII is the Union Pacific Big Boy. At the moment, only the CAB-2 remote and command base are available, with additional modules being released in due course. The second locomotive that was released was the American Flyer New York Central which arrived back in April 2007.

Related Research Articles

Rail transport modelling Modeling trains hobby

Railway modelling or model railroading is a hobby in which rail transport systems are modelled at a reduced scale.

In rail transport, distributed power (DP) is a generic term referring to the physical distribution—at intermediate points throughout the length of a train—of separate motive power groups. Such "groups" may be single units or multiple consists, and are remotely controlled from the leading locomotive. The practice allows locomotives to be placed anywhere within the length of a train when standard multiple-unit (MU) operation is impossible or impractical. DP can be achieved by wireless or wired (trainlined) means. Wired systems now provided by various suppliers use the cabling already extant throughout a train equipped with electronically controlled pneumatic brakes (ECP).

Digital Command Control (DCC) is a standard for a system to operate model railways digitally. When equipped with Digital Command Control, locomotives on the same electrical section of track can be independently controlled.

Lionel, LLC is an American designer and importer of toy trains and model railroads that is headquartered in Concord, North Carolina. Its roots lie in the 1969 purchase of the Lionel product line from the Lionel Corporation by cereal conglomerate General Mills and subsequent purchase in 1986 by businessman Richard P. Kughn forming Lionel Trains, Inc. in 1986. The Martin Davis Investment Group (Wellspring) bought Lionel Trains, Inc. in 1995 and renamed it Lionel, LLC.

O scale is a scale commonly used for toy trains and rail transport modelling. Introduced by German toy manufacturer Märklin around 1900, by the 1930s three-rail alternating current O gauge was the most common model railroad scale in the United States and remained so until the early 1960s. In Europe, its popularity declined before World War II due to the introduction of smaller scales.

American Flyer is a brand of toy train and model railroad manufactured in the United States.

K-Line Electric Trains is a brand name of O gauge and S gauge model railway locomotives, rolling stock, and buildings. Formerly the brand name under which Chapel Hill, North Carolina-based MDK Inc. sold its products, K-Line was then acquired by Sanda Kan, a Chinese toy manufacturer that formerly acted as K-Line's subcontractor. Sanda Kan had licensed the use of the K-Line brand and intellectual property to Lionel. More recently, the Lionel license expired, and Sanda Kan sold the dies to several other companies, with some going to each of Atlas, Bachmann, and RMT.

Z scale is one of the smallest commercially available model railway scales (1:220), with a track gauge of 6.5 mm / 0.256 in. Introduced by Märklin in 1972, Z scale trains operate on 0–10 volts DC and offer the same operating characteristics as all other two-rail, direct-current, analog model railways. Locomotives can be fitted with digital decoders for independent control. Model trains, track, structures, and human/animal figures are readily available in European, North American, and Japanese styles from a variety of manufacturers.

Hornby Railways is a British model railways manufacturing company. Its roots date back to 1901 in Liverpool, when founder Frank Hornby received a patent for his Meccano construction toy. The first clockwork train was produced in 1920. In 1938, Hornby launched its first 00 gauge train. In 1964, Hornby and Meccano were bought by their competitor, Tri-ang, and sold when Tri-ang went into receivership. Hornby Railways became independent again in the 1980s, and became listed on the London Stock Exchange, but due to financial troubles reported in June 2017, is currently majority owned by British turnaround specialist Phoenix Asset Management.

Bachmann Industries is a Bermuda-registered, Chinese-owned company, globally headquartered in Hong Kong; specialising in model railroading.

MTH Electric Trains was an American toy train and model railroad designer, importer, and manufacturer. A privately held company based in Columbia, Maryland, MTH was formerly known as Mike's Train House.

Cab signaling is a railway safety system that communicates track status and condition information to the cab, crew compartment or driver's compartment of a locomotive, railcar or multiple unit. The information is continually updated giving an easy to read display to the train driver or engine driver.

Märklin Digital was among the earlier digital model railway control systems. It was a comprehensive system including locomotive decoders, central control, a computer interface, turnout decoders, digital relays and feedback modules. The initial system was presented at the 1979 Nürnberg International Toy Fair, released in Europe in 1985 and the USA in 1986 under the name Digital H0.

A garden railroad or garden railway is a model railway system set up outdoors in a garden. While G is the most popular scale for garden railroads, 16 mm scale has a dedicated and growing following especially in the UK. Model locomotives in this scale are often live steam scale models of British narrow gauge prototypes. 16 mm scale track, the same gauge as O gauge is probably now more popular in the UK than G scale.

The British Rail Class 74 was an electro-diesel locomotive that operated on the Southern Region of British Railways, rebuilt from redundant Class 71 locomotives in the late 1960s. An electro-diesel locomotive is one that can operate either from an electrical supply, such as overhead catenary or an energised third rail, or from an onboard diesel engine. All were withdrawn between June 1976 and December 1977, and scrapped between 1977 and 1981.

Push–pull is a configuration for locomotive-hauled trains, allowing them to be driven from either end of the train, whether having a locomotive at each end or not.

A control car, cab car, control trailer, or driving trailer is a non-powered rail vehicle from which a train can be operated. As dedicated vehicles or regular passenger cars, they have one or two driver compartments with all the controls and gauges required to remotely operate the locomotive, including exterior locomotive equipment such as horns, bells, ploughs, and lights. They also have communications and safety systems such as GSM-R or European Train Control System (ETCS). Control cars enable push-pull operation when located on the end of a train opposite its locomotive by allowing the train to reverse direction at a terminus without moving the locomotive or turning the train around.

Kato Precision Railroad Models is a Japanese manufacturer of model railroad equipment in N and HO scales. Founded in 1957, the Tokyo-based company manufactures models based on Japanese prototypes for the Japanese market, North American prototypes for the North American market and European high-speed trains for European market. The design and distribution of models for the North American market are handled by their U.S. subsidiary, Kato USA, founded in 1986 and located in Schaumburg, Illinois.

The San Diego Model Railroad Museum is a model railroad exhibit in San Diego, California. At 27,000 sq. ft., it is the largest such indoor exhibit in North America, and one of the largest in the world. The museum is located on the lower level of the Casa de Balboa Building on the Prado in Balboa Park.

Digital model railway control systems are an alternative to control a layout and simplify the wiring and add more flexibility in operations. A number of control systems are available to operate locomotives on model railways. Analog systems where the speed and the direction of a train is controlled by adjusting the voltage on the track are still popular while they have recently given way to control systems based on computer technology.

References

↑ "Command Control Basics". www.digitdynam.com. Archived from the original on 10 July 2011. Retrieved 12 January 2022.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "Command Control Basics". www.digitdynam.com. Archived from the original on 10 July 2011. Retrieved 12 January 2022.

[1]